Fractal Design Pop Silent ATX PC Case User Manual

1. はじめに

This manual provides detailed instructions for the installation, operation, and maintenance of your Fractal Design Pop Silent ATX PC Case. Please read this manual thoroughly before beginning assembly to ensure correct installation and optimal performance. The Pop Silent series is designed to offer a quiet computing experience with effective sound damping and flexible component support.

Figure 1: Assembled Fractal Design Pop Silent ATX PC Case, black with clear tempered glass side panel, showcasin洗練されたデザイン。

2. 安全情報

• Always disconnect the power supply from the wall outlet before performing any installation or maintenance inside the case.
• Handle components with care to avoid damage from electrostatic discharge. Consider using an anti-static wrist strap.
• ケース内部の鋭利な部分にご注意ください。
• 通気口を塞がないでください。ケース周囲に十分な空気の流れを確保してください。
• Keep the case away from liquids and extreme temperatures.

3. パッケージ内容

インストールを続行する前に、すべてのコンポーネントが存在していることを確認してください。

• Fractal Design Pop Silent ATX PC Case
• Accessory box with screws, standoffs, and cable ties
• Three 120mm Aspect fans (pre-installed)
• ユーザーマニュアル（このドキュメント）

図 2: 分解 view of the Fractal Design Pop Silent case, illustrating its various removable panels, internal frame, fans, and drive trays.

4. セットアップとインストール

4.1 サイドパネルの取り外し

The tempered glass side panel can be easily removed by unscrewing the captive thumbscrews at the rear and gently pulling the panel away. The solid steel side panel is removed similarly. Store panels safely to prevent damage.

4.2マザーボードの取り付け

1. I/O シールドをケースの背面開口部に取り付けます。
2. Align the motherboard with the pre-installed standoffs. Additional standoffs may be required for certain motherboard form factors (ATX, mATX, Mini ITX).
3. アクセサリ ボックスの適切なネジを使用してマザーボードを固定します。

図3: 内部 view of the Fractal Design Pop Silent case, highlighting the spacious motherboard tray area and fan mounts.

4.3電源ユニット（PSU）の設置

1. Mount the PSU to the removable bracket at the rear of the case.
2. Slide the PSU with the bracket into the designated compartment at the bottom rear of the case.
3. Secure the bracket with screws. Ensure the PSU fan faces downwards for optimal cooling, drawing fresh air from the bottom filter.

4.4 ストレージドライブのインストール

The case supports up to three 3.5" HDDs and six 2.5" SSDs (or two 3.5" HDDs and five 2.5" SSDs with one optical bay in use).

• 2.5インチSSD: Mount SSDs to the dedicated trays behind the motherboard tray.
• 3.5インチHDD: Install HDDs into the removable drive cages located under the PSU shroud.
• 5.25" Devices: Two concealed 5.25" bays are available behind the front panel, accessible by removing the magnetic cover. One bay includes a storage drawer.

Figure 4: Illustrates the process of installing a 3.5" HDD into one of the removable drive trays.

図 5: 拡大図 view of the 5.25" bay, showing the integrated storage drawer and magnetic cover.

4.5 ケーブル管理

The Pop Silent case features dedicated cable routing channels and Velcro straps behind the motherboard tray to facilitate clean and efficient cable management, improving airflow and aesthetics.

図6: 後部内装 view of the Fractal Design Pop Silent case, showcasing the cable management channels and 2.5" drive mounts.

図7：詳細 view of the cable management routes and pre-installed Velcro straps for organizing cables.

4.6 フロントI/O接続

Connect the front panel cables (USB, audio, power, reset) to the corresponding headers on your motherboard. Refer to your motherboard manual for specific header locations.

図8：上 view of the Fractal Design Pop Silent case, displaying the front I/O panel with USB ports, audio jacks, and power button.

5. PCケースの操作

Once all components are installed and cables are connected, you can power on your system using the power button on the top I/O panel. The pre-installed Aspect fans provide efficient cooling while maintaining low noise levels due to the case's sound-damped design.

6. メンテナンス

6.1 クリーニング

Regular cleaning helps maintain optimal performance and longevity. Use a soft, dry cloth for exterior surfaces. For interior dust, use compressed air. Ensure the system is powered off and unplugged before cleaning.

6.2 ダストフィルター

The Pop Silent case includes removable dust filters at the front, top, and bottom (for the PSU intake). Regularly clean these filters by rinsing them with water and allowing them to dry completely before reinstallation. This prevents dust buildup and maintains airflow.

7。 トラブルシューティング

• システムが電源オンにならない: Check all power connections, including the 24-pin motherboard power, CPU power, and front panel power switch header. Ensure the PSU is switched on.
• 表示なし： Verify that the graphics card is properly seated and connected to power, and that the monitor cable is securely attached to the graphics card.
• 過度のノイズ： Ensure all fans are securely mounted and free from obstructions. Check for loose cables or components.
• 過熱： Confirm that all fans are spinning correctly and that dust filters are clean. Ensure proper thermal paste application on the CPU cooler.

8. 仕様

9. 保証とサポート

Fractal Design products are manufactured to the highest quality standards. For warranty information, technical support, or to download the latest drivers and manuals, please visit the official Fractal Design web公式サイトをご覧いただくか、カスタマーサポートまでお問い合わせください。保証請求のために購入証明書を保管してください。

Thank you for choosing Fractal Design.