Epson Home Cinema 880 3LCD 1080p Projector Instruction Manual

導入

This manual provides essential information for the safe and efficient operation of your Epson Home Cinema 880 3LCD 1080p Projector. Please read these instructions thoroughly before using the product and retain them for future reference. The Epson Home Cinema 880 is designed to deliver a high-quality 1080p picture, offering a versatile viewing experience for home entertainment.

箱の中身

Upon unpacking your Epson Home Cinema 880 projector, verify that all the following items are included:

• エプソン ホームシネマ 880 プロジェクター
• 電源ケーブル
• 電池付きリモコン
• クイックセットアップガイド

製品終了view

The Epson Home Cinema 880 projector features a compact design with intuitive controls and multiple connectivity options. Below are key views and features of the projector.

公式製品終了view ビデオ

設定

電源接続

1. Connect the power cable to the projector's power input port located at the rear.
2. 電源ケーブルのもう一方の端を、機能している電源コンセントに差し込みます。

HDMI接続

1. Connect an HDMI cable from your video source (e.g., Blu-ray player, streaming device, gaming console) to the HDMI input port on the rear of the projector.
2. 接続が安全であることを確認してください。

投影角度の調整

The projector includes adjustable feet and keystone correction features to optimize the image angle.

1. Front Foot Adjustment: Locate the adjustable foot release button on the bottom of the projector. Press the button and extend the front foot to raise the front of the projector. Adjust as needed to achieve the desired vertical angle.
2. キーストーン補正: Use the keystone correction buttons on the control panel or remote control to square the image if it appears trapezoidal. The projector also features an auto picture skew sensor for automatic keystone correction.

フォーカス調整

To ensure a clear and sharp image:

1. Locate the focus ring around the projector lens.
2. Rotate the focus ring clockwise or counter-clockwise until the projected image appears sharp and clear on the screen.

操作手順

電源オン/オフ

1. 電源オン: を押す 力 button on the projector's control panel or the remote control. The power indicator light will illuminate.
2. 電源を切る： を押す 力 button again. A confirmation message may appear; press the Power button a second time to confirm shutdown. The projector fan will continue to run briefly to cool down the lamp before turning off completely.

ソースの選択

異なる入力ソースを切り替えるには:

1. を押す ソース検索 コントロールパネルまたはリモコンのボタン。
2. Use the arrow buttons to navigate through the available input sources (e.g., HDMI, USB).
3. プレス 入力 or the corresponding button to select the desired source.

カラーモード

The projector offers four selectable color modes to optimize content for various viewing条件：

• 動的： For bright environments, maximizing light output.
• ブライトシネマ： Balances brightness and color accuracy for moderately lit rooms.
• シネマ： Optimized for dark room viewing, providing rich, accurate colors.
• ナチュラル： Provides a natural color reproduction, suitable for general viewing。

To change the color mode, access the menu and navigate to the image settings.

メンテナンス

フィルターのクリーニング

Regular cleaning of the air filter is crucial for maintaining projector performance and lamp 人生。

1. プロジェクターの電源をオフにして、電源ケーブルを抜きます。
2. Locate the air filter cover on the side of the projector.
3. カバーを開けてエアフィルターを慎重に取り外します。
4. Use a small vacuum cleaner or a soft brush to remove dust and debris from the filter. Do not use water or harsh chemicals.
5. 清潔なフィルターを再度挿入し、カバーをしっかりと閉じます。

注記： The frequency of cleaning depends on the usage environment. A dusty environment may require more frequent cleaning.

トラブルシューティング

• 画像無し： Ensure the power cable is securely connected and the projector is powered on. Verify that the video source is correctly connected via HDMI and selected as the input. Check if the lens cover is open.
• ぼやけた画像: Adjust the focus ring around the lens until the image is sharp. Ensure the projector is placed at an appropriate distance from the screen.
• 画像は台形です: Use the keystone correction feature (manual or auto) to square the image.
• 過熱警告: Ensure the projector's ventilation vents are not blocked. Clean the air filter if it is dusty. Operate the projector in a well-ventilated area. Consider using Eco mode to reduce heat output.
• 音が出ない: Check the audio cable connection (if using external speakers). Ensure the projector's volume is not muted or set too low. Verify the audio output settings on your source device.

仕様

保証とサポート

The Epson Home Cinema 880 projector comes with a standard 2-year limited warranty. This includes full-unit replacement and free technical phone support for the life of the product. For warranty claims or technical assistance, please contact Epson customer support.