導入
This manual provides essential information for the proper setup, operation, and maintenance of your 360 S7 Pro Robot Vacuum and Mop. Please read this manual thoroughly before using the product to ensure safe and efficient operation.
Image: The 360 S7 Pro Robot Vacuum and Mop, showcasing its sleek black design and accompanying mobile app interface.
セットアップガイド
1. 開梱とコンポーネント
すべての部品をパッケージから慎重に取り出してください。以下のすべての部品が揃っていることを確認してください。
- 360 S7 Pro Robot Vacuum and Mop
- 充電ドック
- 電源アダプター
- 水タンクとモップパッド
- クリーニングツール（ブラシロール用）
- サイドブラシ
- ユーザーマニュアル（このドキュメント）
2. 充電ドックの設置
Place the charging dock against a wall on a hard, level surface. Ensure there is at least 0.5 meters (1.6 feet) of clear space on both sides of the dock and 1.5 meters (4.9 feet) in front of it. This allows the robot to easily return for charging.
3. 初期充電
Connect the power adapter to the charging dock and plug it into a wall outlet. Place the robot vacuum onto the charging dock. The indicator lights on the robot will illuminate to show it is charging. For first use, allow the robot to fully charge, which typically takes approximately 4-5 hours.
4. アプリのインストールと接続
Download the "360Robot" app from your mobile device's app store. Follow the in-app instructions to create an account and connect your 360 S7 Pro to your home Wi-Fi network. Note that the 360 S7 Pro only supports 2.4GHz Wi-Fi networks and is not compatible with 5GHz networks.
5. 初期マッピング
For optimal performance, allow the robot to complete an initial mapping run of your home without interruption. During this process, the robot uses its LiDAR navigation system to create a detailed map of your floor plan. Ensure all doors to areas you wish to map are open. The robot may return to its charging dock multiple times to recharge during this process. Do not manually move the robot or interrupt its cleaning cycle until it announces "Cleaning is complete!" and returns to the dock on its own.
Image: The 360 S7 Pro demonstrating its precision LiDAR navigation, creating a virtual map of the room.
操作手順
1. 基本的な操作
- デバイス上のボタン: Press the main power button on the robot to start or pause a cleaning cycle. Press and hold to send the robot back to the charging dock.
- モバイルアプリ: The "360Robot" app provides comprehensive control over your robot, including starting/stopping cleaning, selecting cleaning modes, setting schedules, and managing maps.
2. クリーニングモード
The 360 S7 Pro offers versatile cleaning options:
- 掃除機のみ: 乾燥したゴミの収集用。
- モップのみ: For wet cleaning with the water tank attached.
- 掃除機とモップを同時にかける： Performs both functions in a single pass. Ensure the water tank is filled and the mop pad is attached.
Image: The 360 S7 Pro in action, illustrating its dual vacuuming and mopping capabilities.
3. Smart Features via App
Utilize the "360Robot" app to access advanced cleaning functionalities:
- Virtual Boundaries and No-Go Zones: Draw virtual lines or rectangular zones on the map within the app to restrict the robot from entering specific areas. This is useful for protecting delicate items or preventing access to certain rooms. When mopping, you can set "no-mop zones" to avoid carpets.
- 選択的な部屋の清掃： After mapping, the app will divide your home into distinct rooms. You can select specific rooms for cleaning, allowing for targeted cleaning based on your needs.
- ゾーンクリーニング: Define a custom area on the map for the robot to clean. This is ideal for cleaning spills or high-traffic spots.
- 定期清掃： Set up daily or weekly cleaning schedules for automated cleaning at your preferred times.
- 吸引力調整: Adjust the suction power from Quiet (600 Pa) to Standard (1000 Pa), Powerful (1500 Pa), or Max (2650 Pa) depending on the cleaning requirements. The robot can automatically increase suction on carpets.
Image: An illustration of the customizable cleaning options available through the 360Robot app, including scheduled, selective room, zone, deep, no-go lines, and no-mop zones.
Image: The 360 S7 Pro demonstrating the virtual boundaries feature, preventing the robot from entering a designated area.
Image: A visual representation of the 360 S7 Pro's adjustable suction power levels, ranging from Quiet (600 Pa) to Max (2650 Pa), suitable for various debris types.
4. 音声コントロール
The 360 S7 Pro is compatible with Amazon Echo and Google Home. Link your robot vacuum to your smart home assistant through the respective app to control it using voice commands.
メンテナンス
Regular maintenance ensures optimal performance and extends the lifespan of your 360 S7 Pro. Always power off the robot before performing any maintenance.
1. Dust Bin Emptying
Empty the dust bin after each cleaning cycle or when the app indicates it is full. To empty, press the dust bin release button, remove the bin, open its lid, and discard the collected debris.
2. フィルターの清掃/交換
The robot uses a cloth filter. Tap the filter gently to remove loose dirt. For deeper cleaning, rinse the filter under running water. Ensure the filter is completely dry before reinserting it into the dust bin. Replace the filter every 3-6 months, or as needed, to maintain suction efficiency.
3. ブラシロールの洗浄
Periodically remove the main brush roll and side brushes to clear any tangled hair or debris. Use the provided cleaning tool to cut and remove hair wrapped around the brush roll. Ensure the brushes are free of obstructions for effective cleaning.
4. Water Tank and Mop Pad Maintenance
After mopping, empty any remaining water from the water tank. Remove the mop pad and rinse it thoroughly. Allow both the water tank and mop pad to air dry completely before storing or reattaching.
5. センサーのクリーニング
Wipe the robot's sensors (including cliff sensors, wall sensors, and the LiDAR sensor window) with a clean, dry cloth. Keeping sensors clean is crucial for accurate navigation and obstacle avoidance.
トラブルシューティング
If you encounter issues with your 360 S7 Pro, refer to the common problems and solutions below. For more complex issues, contact customer support.
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ロボットは充電されません。 | Charging dock not powered; poor contact with charging pins; robot not properly docked. | Ensure charging dock is plugged in. Clean charging pins on both robot and dock. Re-dock the robot, ensuring proper alignment. |
| ロボットが頻繁に動けなくなります。 | Obstacles (cables, rugs, furniture); dirty sensors. | Clear obstacles from the cleaning path. Use virtual boundaries for problem areas. Clean all sensors. |
| アプリの接続の問題。 | Wi-Fi パスワードが正しくありません。5GHz Wi-Fi ネットワークです。信号が弱いです。 | Verify Wi-Fi password. Ensure you are connected to a 2.4GHz network. Move robot closer to router. Restart router and robot. |
| 洗浄性能が悪い。 | Full dust bin; dirty filter; tangled brushes. | Empty dust bin. Clean or replace filter. Clean main brush roll and side brushes. |
これらの解決策を試しても問題が解決しない場合は、保証とサポートのセクションを参照してさらにサポートを受けてください。
製品仕様
| ブランド | 360 |
| モデル | S7プロ |
| 特集 | Smart Mapping, Selective Room Cleaning, LiDAR Navigation, Logical Navigation, Scheduling |
| 色 | 黒 |
| 製品寸法 | 長さ17.13インチ x 幅17.13インチ x 高さ6.65インチ |
| 含まれるコンポーネント | ブラシ |
| フィルタータイプ | 布 |
| バッテリー寿命 | 120 minutes |
| 水タンク容量 | 170ミリリットル |
| 電源 | 電池駆動 |
| 電池付属 | Yes (1 Lithium Metal battery) |
| 制御方法 | 音声、アプリ |
| リチウム電池容量tage | 3.7ボルト |
| 対応デバイス | アマゾンエコー、グーグルホーム |
| アイテム重量 | 10.58ポンド |
保証とサポート
保証情報
The 360 S7 Pro Robot Vacuum and Mop comes with a one-year worry-free warranty service from the date of purchase. This warranty covers manufacturing defects and ensures your product functions as intended under normal use.
カスタマーサポート
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact 360 Smart Life Customer Support. We offer 24-hour technical support and aim to respond to all inquiries within 24 hours. You can reach us through the "360Robot" app or via our official webサイト。
A local after-service center is available in California, USA, for convenient support.
Image: The 360 Smart Life company logo, representing the brand's commitment to customer service.
