AVM FRITZ! Repeater 600 User Manual

導入

The FRITZ! Repeater 600 is a compact device designed to extend the range of your existing wireless network. It operates on the 2.4 GHz band, providing WLAN N connectivity at speeds up to 600 Mbps. This repeater supports Mesh WiFi, ensuring stable and seamless connections throughout your home or office network. Its compact design allows for discreet placement in any standard power socket.

パッケージ内容

• 1 x FRITZ! Repeater 600
• クイックインストールガイド

Image: The FRITZ! Repeater 600 packaging, showing the device and branding.

安全に関する注意事項

• Ensure the device is plugged into a properly grounded power outlet.
• デバイスを湿気や極端な温度にさらさないでください。
• デバイスを開けないでくださいasing; 修理は資格のある担当者に依頼してください。
• デバイスを直射日光や熱源から遠ざけてください。

設定

1. 初期配置

Plug the FRITZ! Repeater 600 into a power outlet located between your existing wireless router and the area where you want to improve WiFi coverage. The repeater's LED indicator will help you find an optimal position.

2. WPS Configuration (Recommended for FRITZ!Box and WPS-enabled routers)

1. Plug the FRITZ! Repeater 600 into a power outlet. Wait for the LED to indicate readiness (typically a slow blink or solid light).
2. ワイヤレス ルーターの WPS ボタンを押します。
3. Within two minutes, press the 'Connect' button on the FRITZ! Repeater 600.
4. The LED on the repeater will flash rapidly during the connection process and then become solid when successfully connected.

Image: A hand pressing the 'Connect' button on the FRITZ! Repeater 600, which is plugged into a wall socket.

3. Manual Configuration (if WPS is not available or fails)

1. Plug the FRITZ! Repeater 600 into a power outlet.
2. Connect a computer, tablet, or smartphone to the FRITZ! Repeater's default wireless network. The default network key is printed on the bottom of the device.
3. 開く web browser and navigate to the repeater's configuration interface (usually http://fritz.repeater or http://192.168.178.2).
4. Follow the on-screen instructions to select your existing wireless network and enter its password.

4. 最適な配置

The LED indicator on the repeater provides feedback on the signal quality. A solid green light typically indicates a good connection. If the light is orange or red, consider moving the repeater closer to your main router until a stable green light is achieved. This ensures the best possible extension of your WiFi signal.

Image: An illustration depicting a multi-story house with FRITZ! Repeaters strategically placed to extend WiFi coverage to different rooms and floors.

手術

LEDインジケーター

The LED on the front of the FRITZ! Repeater 600 provides visual status information:

• 緑色の点灯: The repeater is successfully connected and providing good signal quality.
• 緑色に点滅: The repeater is attempting to connect or is in WPS mode.
• オレンジ/赤の単色: The repeater is connected but the signal quality is poor, or there is an issue. Consider repositioning the device.
• オフ： The device is not powered on or is in a power-saving state.

画像: 前面のクローズアップ view of the FRITZ! Repeater 600, highlighting its compact design and the LED indicator light.

Mesh WiFi Functionality

When used with a FRITZ!Box or another Mesh-enabled router, the FRITZ! Repeater 600 integrates into a Mesh WiFi system. This allows your devices to seamlessly switch between the router and the repeater without losing connection, ensuring optimal performance as you move around your network.

メンテナンス

• クリーニング： Disconnect the repeater from the power outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• ファームウェアの更新： Periodically check the AVM website for firmware updates for your FRITZ! Repeater 600. Updates can provide performance improvements, new features, and security enhancements.
• 換気： Ensure the repeater is not covered and has adequate airflow around it to prevent overheating.

トラブルシューティング

No Connection / Poor Signal

• Reposition the Repeater: If the LED indicator is orange or red, move the repeater closer to your main wireless router.
• 電力を確認します: リピーターが機能している電源コンセントにしっかりと差し込まれていることを確認します。
• Verify Router Settings: Confirm that your main wireless router is powered on and broadcasting a WiFi signal.
• 接続を再確立します: Try the WPS configuration process again. If unsuccessful, attempt manual configuration via a web ブラウザ。
• Default Network Key: If connecting directly to the repeater for manual setup, ensure you are using the correct default network key printed on the device.

デバイスのリセット

If the repeater is unresponsive or you wish to revert to factory settings, a factory reset may be necessary. Consult the full manual or AVM support website for specific reset instructions, as this typically involves pressing and holding a small reset button for several seconds.

仕様

Image: The FRITZ! Repeater 600 shown with its physical dimensions: 3cm height, 6.4cm width, and 6.4cm depth.

保証情報

Specific warranty details for the FRITZ! Repeater 600 are not provided in the available product data. Please refer to the official AVM web包括的な保証条件については、サイトまたは購入書類をご覧ください。

サポート

Detailed support contact information is not provided in the available product data. For technical assistance, further documentation, or customer service, please visit the official AVM webサイトをご覧いただくか、販売店にお問い合わせください。