Nokia WiFi Beacon 1 Mesh System: AC1200 Whole Home WiFi Instruction Manual

1. はじめに

Welcome to the Nokia WiFi Beacon 1 Mesh System. This high-performance whole home WiFi solution is designed to replace your existing router, providing seamless AC1200 throughput and resolving common WiFi interference issues. With its advanced mesh technology, the Beacon 1 ensures robust and reliable internet connectivity throughout your home.

2.製品オーバーview

主な特徴:

• 家全体をカバー: A 3-pack system covers up to 4500 square feet, eliminating dead zones.
• 高性能: Supports AC1200 throughput for fast and reliable internet.
• AI駆動メッシュ: Intelligently optimizes your network for the best connection.
• シームレスローミング: Stay connected as you move throughout your home with a single Wi-Fi name.
• 幅広いデバイスサポート: 最大 150 台のデバイスを同時に接続します。
• 高度なセキュリティ: Features WPA2 and WPA3 encryption for a secure network.
• ペアレンタルコントロール: Manage internet access and content for family members via the app.
• 簡単なセットアップ: Guided installation through the intuitive Nokia WiFi app.

コンポーネント:

The Nokia WiFi Beacon 1 system typically includes:

• Nokia WiFi Beacon 1 units (e.g., 3 units for a Trio pack)
• Power adapters for each Beacon
• イーサネットケーブル
• クイックインストールガイド

図1: 前面 view of a single Nokia WiFi Beacon 1 unit.

図2：背面 view of the Nokia WiFi Beacon 1, showing LAN/WAN ports and power input.

3.セットアップガイド

3.1. 開梱と初期準備

1. すべてのコンポーネントを箱から慎重に取り出します。
2. ダウンロード Nokia WiFi app デバイスのアプリ ストアから (iOS および Android で利用可能)。
3. Ensure your existing modem is powered off and disconnected from your old router.

3.2. Connecting the Primary Beacon

4. Place one Nokia WiFi Beacon 1 unit near your modem. This will be your primary Beacon.
5. 付属のイーサネットケーブルの一方の端を WAN/LAN port (blue) on the primary Beacon.
6. イーサネット ケーブルのもう一方の端をモデムのイーサネット ポートに接続します。
7. Connect the power adapter to the primary Beacon and plug it into a power outlet.
8. Power on your modem, then power on the primary Beacon. Wait for the LED indicator on the Beacon to turn solid blue or green, indicating it's ready for setup.
9. Open the Nokia WiFi app and follow the on-screen instructions to configure your new network.

3.3. Adding Additional Beacons

9. Once the primary Beacon is set up, place the additional Beacon units in other areas of your home where you need improved Wi-Fi coverage. For optimal coverage, place them strategically to cover up to 4500 sq ft for a 3-pack system.
10. Connect the power adapter to each additional Beacon and plug it into a power outlet.
11. Wait for the LED indicator on each additional Beacon to turn solid blue or green.
12. In the Nokia WiFi app, select the option to add a new Beacon and follow the instructions to integrate them into your mesh network.

Figure 3: Using the Nokia WiFi app for easy setup and management.

Figure 4: Coverage illustration for 1, 2, and 3 Nokia WiFi Beacon units, demonstrating dead zone elimination.

4. 操作手順

4.1. Using the Nokia WiFi App

The Nokia WiFi app is your central control panel for managing your mesh network. It allows you to:

• View connected devices and their signal strength.
• 特定のデバイスまたはユーザーのインターネット アクセスを管理するためのペアレンタル コントロールを設定します。
• Create a guest network for visitors, keeping your main network secure.
• Monitor network security and receive alerts.
• Perform network diagnostics and optimize performance.

4.2. 有線接続

Each Nokia WiFi Beacon 1 unit is equipped with 4 Ethernet ports (WAN/LAN and LAN) supporting 2.5G wired backhaul and LAN connections. This allows you to connect devices such as gaming consoles, smart TVs, or network-attached storage (NAS) directly to a Beacon for maximum speed and stability.

4.3. LEDインジケーターのステータス

The LED light at the base of each Beacon indicates its current status:

• 緑色の点灯: All is well, Beacon is connected and operating normally.
• 青一色： Setting up or booting up.
• 黄色一色: Startup in progress.
• 赤一色: Has an issue (refer to troubleshooting section).

5. メンテナンス

5.1. ファームウェアのアップデート

Regular firmware updates are crucial for maintaining optimal performance, security, and access to new features. The Nokia WiFi app will notify you when updates are available and guide you through the installation process. Ensure your Beacons remain powered on during updates.

5.2. Cleaning Your Beacons

To ensure proper ventilation and longevity, periodically clean your Beacon units with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials.

5.3. デバイスのリセット

If you encounter persistent issues, you may need to reset a Beacon to its factory settings. Locate the reset button (often a small pinhole) on the back or bottom of the unit. Use a paperclip to press and hold the button for approximately 10 seconds until the LED indicator changes, then release. This will erase all custom settings, and you will need to reconfigure the Beacon via the app.

6。 トラブルシューティング

一般的な問題と解決策:

• インターネット接続なし:
  • モデムが正しく動作しているかどうかを確認してください。
  • すべてのイーサネット ケーブルが確実に接続されていることを確認します。
  • Restart your modem and all Nokia WiFi Beacons.
• Wi-Fi信号が弱い:
  • Relocate Beacons to optimize coverage, ensuring they are not too far apart or obstructed by thick walls.
  • 干渉源（電子レンジ、コードレス電話など）がないか確認してください。
• デバイスを接続できません:
  • Wi-Fiパスワードを確認します。
  • Ensure the device is within range of a Beacon.
  • 接続しようとしているデバイスを再起動します。
• LEDインジケーターが赤:
  • This indicates a problem. Check your internet connection and the connections between your Beacons.
  • Try restarting the affected Beacon and your primary Beacon.

For further assistance, consult the Nokia WiFi app's help section or visit the Nokia support webサイト。

7. 仕様

8. 保証とサポート

The Nokia WiFi Beacon 1 Mesh System comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the documentation included with your product or visit the official Nokia support website. For technical support, troubleshooting, or service inquiries, please contact Nokia customer service or use the support features within the Nokia WiFi app.