1. はじめに
The NZXT AER RGB 2 fan integrates seamlessly into the Hue 2 ecosystem, providing optimal airflow and advanced lighting customizations for your PC. Designed with fluid dynamic bearings and winglet tips, these fans offer enhanced cooling performance while minimizing operational noise. This manual provides essential information for the proper installation, operation, and maintenance of your AER RGB 2 fan.
Image 1.1: NZXT AER RGB 2 120mm fan showcasinRGB 照明を備えています。
2. 箱の中身
インストールを続行する前に、すべてのコンポーネントが存在していることを確認してください。
- 1 x 120mm AER RGB Case Fan
- 1 x 500mm Fan Connection Cable
- 1 x 50mm Fan-to-Fan Cable
- 1 x 500mm Fan-to-Accessory Cable
3. セットアップとインストール
Proper installation is crucial for optimal performance and aesthetics. Ensure your PC is powered off and unplugged before beginning.
3.1 ファンの取り付け
Mount the AER RGB 2 fan to your PC case or radiator using the provided screws. Ensure the fan is oriented correctly for desired airflow (intake or exhaust).
画像3.1: 側面 view of the fan, highlighting mounting screw locations.
3.2 Cabling and Controller Connection
The AER RGB 2 fan requires an NZXT Hue 2 RGB lighting controller (sold separately) for full functionality and lighting customization. Connect the fan to the controller using the appropriate cables.
- Fan Connection Cable: Connects the fan to a fan channel on the Hue 2 controller.
- Fan-to-Fan Cable: Used to daisy-chain multiple AER RGB 2 fans together for synchronized lighting and control.
- Fan-to-Accessory Cable: Connects the fan to other Hue 2 accessories.
The Hue 2 controller typically features multiple RGB lighting channels and PWM fan channels, allowing for extensive customization and control over your cooling and lighting setup.
ビデオ3.2: 終了view of the NZXT RGB & Fan Controller, demonstrating its features and connectivity options. This controller is essential for managing your AER RGB 2 fans.
Ensure all cables are securely connected to prevent intermittent issues. Refer to your Hue 2 controller's manual for specific port identification and connection guidelines.
4. Operation and Software Control
The NZXT AER RGB 2 fan is controlled via the NZXT CAM software. This software allows for comprehensive management of fan speeds, RGB lighting effects, and system monitoring.
4.1 NZXT CAMソフトウェア
Download and install the NZXT CAM software from the official NZXT website. An internet connection is required for download and some features. The software provides:
- ファンコントロール: Adjust PWM fan speeds to optimize cooling performance and noise levels.
- RGB照明のカスタマイズ: Synchronize lighting effects across multiple AER RGB 2 fans and other Hue 2 accessories. Choose from various presets or create custom lighting profiles.
- システム監視: Monitor CPU and GPU temperatures, fan RPMs, and other system metrics.
ビデオ4.1: 概要view of the NZXT AER RGB Case Fan, showcasing its lighting capabilities and integration within a PC build.
System Requirements: PC with HUE 2 RGB lighting controller and Windows 10 operating system. Internet connection is needed to download CAM. Some CAM features require Internet access, a valid email address, and acceptance of our current Terms of Service.
5. メンテナンス
Regular maintenance ensures the longevity and optimal performance of your AER RGB 2 fan.
5.1 クリーニング
- Periodically clean fan blades and housing to prevent dust buildup, which can impede airflow and increase noise.
- Use a can of compressed air or a soft, dry cloth to gently remove dust.
- クリーニングする前に、PC の電源がオフになっており、プラグが抜かれていることを確認してください。
6。 トラブルシューティング
If you encounter issues with your AER RGB 2 fan, refer to the following common solutions:
- ファンが回転しない: Check all power and signal cable connections to the fan and the Hue 2 controller. Ensure the controller is receiving power.
- RGB 照明が機能しない: Verify that the fan's RGB cable is correctly connected to an RGB channel on the Hue 2 controller. Check CAM software settings for lighting profiles and ensure the controller is detected.
- 過度の騒音: Ensure the fan is securely mounted and not vibrating against the case. Check for dust buildup on fan blades and clean if necessary. Adjust fan speed profiles in CAM software.
- CAM Software Not Detecting Fan/Controller: Ensure the Hue 2 controller is properly connected to your motherboard's internal USB header. Restart CAM software or your PC.
7. 仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | HF-28120-B1 |
| 製品寸法 | 長さ4.7インチ x 幅1インチ x 高さ4.7インチ (120mm x 25mm x 120mm) |
| 材料 | Copper (Bearing) |
| 電源コネクタタイプ | 4ピン（PWM） |
| 巻tage | 12ボルト |
| ワットtage | 24ワット |
| 冷却方法 | 空気 |
| 対応デバイス | パソコン |
| 騒音レベル | 33デシベル |
| 最高回転数 | 1500 回転 |
| ベアリングタイプ | 流体動圧軸受（FDB） |
8. 保証とサポート
For detailed warranty information and technical support, please visit the official NZXT web購入サイトをご覧いただくか、カスタマーサービスまでお問い合わせください。保証請求のために購入証明書を保管してください。
NZXT Official Webサイト： www.nzxt.com
