導入
The Sena SC-A0318 Helmet Communication System is designed to enhance your riding experience by providing seamless communication and audio features within your helmet. This manual will guide you through the setup, operation, and maintenance of your device.
パッケージ内容
The Sena SC-A0318 Helmet Communication System package includes the following components:
- Main Unit (Sena SC-A0318)
- ヘルメットClamp キット
- Attachable Boom Microphone
- 有線マイク
- Speakers (integrated with clamp キット）
- Hook and Loop Fasteners for speakers and microphones
- Allen Wrench for clamp インストール
- USB充電ケーブル
Image: All components included in the Sena SC-A0318 Helmet Communication System package.
セットアップとインストール
1. Installing the Helmet Clamp ユニット
The helmet clamp unit is essential for mounting the Sena SC-A0318 to your helmet.
- ヘルメットのネジを緩めますamp 付属の六角レンチを使用します。
- スライドさせてamp between the helmet shell and the inner padding on the left side of your helmet. Ensure it is securely positioned.
- CLのネジを締めますamp to firmly secure it to the helmet.
- Connect the main unit to the clamp. It should click into place.
2. スピーカーとマイクの取り付け
The Sena SC-A0318 includes speakers and microphone options for clear audio.
- Remove the cheek pads from your helmet to access the speaker pockets.
- Attach the hook and loop fasteners to the back of the speakers.
- Place the speakers into the helmet's speaker pockets, ensuring they are centered over your ears. Route the speaker wires neatly under the helmet padding.
- お好みのマイクを選択してください:
- ブームマイク: Ideal for open-face or modular helmets. Attach the boom microphone to the helmet clamp and position it near your mouth.
- 有線マイク： Suitable for full-face helmets. Attach the wired microphone to the helmet interior, ensuring it is close to your mouth but not obstructing your vision.
- Reinstall the helmet's cheek pads and ensure all wires are tucked away securely.
操作手順
電源のオン/オフ
To power on the Sena SC-A0318, press and hold the Jog Dial and the Phone Button simultaneously until you hear "Hello".
To power off, press and hold the Jog Dial and the Phone Button simultaneously until you hear "Goodbye".
ボリュームコントロール
Rotate the Jog Dial clockwise to increase the volume.
Rotate the Jog Dial counter-clockwise to decrease the volume.
Bluetoothインターコムペアリング
The Sena SC-A0318 supports 4-way Bluetooth intercom with a working distance of up to 900 meters (0.6 miles) in open terrain.
- Ensure all Sena units are powered on.
- On each unit, press and hold the Jog Dial until you hear "Intercom Pairing" and see red flashing lights.
- On one of the units, press the Jog Dial once. The units will automatically connect.
電話のペアリング
To pair your Sena SC-A0318 with your smartphone:
- ユニットの電源がオンになっていることを確認してください。
- Press and hold the Phone Button until you hear "Phone Pairing" and see red and blue flashing lights.
- On your smartphone, go to Bluetooth settings and select "Sena SC-A0318" from the list of available devices.
- Once paired, you will hear "Your headset is paired" and the light will change to a blue flashing light.
Making/Receiving Calls & Music
Once paired with your phone, you can:
- Answer a call: Press the Phone Button.
- End a call: Press the Phone Button.
- Play/Pause music: Press the Phone Button.
- Skip track: Rotate the Jog Dial clockwise.
- Previous track: Rotate the Jog Dial counter-clockwise.
仕様
| 特徴 | 詳細 |
|---|---|
| モデル | SC-A0318 (843-02001) |
| アイテム重量 | 5.6オンス |
| 製品寸法 | 9.3 x 4.1 x 1.6インチ |
| バッテリー | リチウムポリマー電池1個が必要 |
| インターコム範囲 | 開けた地形では最大900メートル（0.6マイル） |
| インターコムサポート | 最大4人乗り |
| 通話時間 | 最大12時間 |
| 充電時間 | 2.5時間 |
| 特集 | Advanced Noise Control, Glove-Friendly Jog Dial |
トラブルシューティング
電源なし
If the unit does not power on, ensure it is fully charged. Connect the unit to a power source using the USB cable and allow it to charge for at least 2.5 hours.
インターコムの切断
If intercom connection is lost, ensure all units are within range and re-initiate pairing as described in the "Bluetooth Intercom Pairing" section.
オーディオの問題
Check speaker and microphone connections. Ensure speakers are correctly positioned over your ears and the microphone is close to your mouth. Adjust volume using the Jog Dial.
メンテナンスとケア
- Keep the unit clean by wiping it with a soft, damp 布で拭いてください。強い化学薬品や溶剤の使用は避けてください。
- Ensure the USB charging port cover is securely closed when not charging to prevent dust and moisture ingress.
- 使用しないときは、ユニットを涼しく乾燥した場所に保管してください。
- Regularly check for firmware updates via the Sena Device Manager to ensure optimal performance and access to new features.
保証とサポート
保証情報およびテクニカルサポートについては、Senaの公式ウェブサイトをご覧ください。 webご購入の際は、サイトをご覧いただくか、お近くの販売店にお問い合わせください。保証請求の際に必要となりますので、購入証明書を保管してください。
オンラインリソースとFAQは以下からご利用いただけます。 www.sena.com.
