1.製品オーバーview
The Schlage F51A Georgian 505 is a single cylinder entry door lock knobset designed for residential use. This lock provides security with a key entry from the outside and a turn-button for locking/unlocking from the inside. The interior knob always remains free for immediate exit (panic-proof function). The unit is non-handed and field reversible, allowing for flexible installation on left or right-handed doors.
2. パッケージ内容
インストールを開始する前に、すべてのコンポーネントが揃っていることを確認してください。部品が不足または破損している場合は、インストールを続行せず、カスタマーサポートにお問い合わせください。
- Exterior Knob Assembly (with key cylinder)
- Interior Knob Assembly (with turn-button)
- Latch Bolt Assembly
- Strike Plate (Part 10-063, supplied with Square Corner and Round Corner Full Lip Strike Plates, Dimensions: 2-1/4" x 1-5/8")
- Faceplates (Part 16-211, supplied with 1/4" Round Corner, Square Corner and Drive-In Faceplates)
- 取り付けネジ
- キー（通常2個）
- インストールテンプレート（含まれている場合）
3. 安全情報
Read all instructions carefully before installation and use. Keep this manual for future reference.
- 取り付け中は必ず安全メガネなどの適切な安全装備を着用してください。
- Use the correct tools for the job to prevent damage to the lock or injury.
- Ensure the door is properly prepared and aligned before installing the lock.
- Do not force components during installation. If parts do not fit, re-check the instructions.
- 窒息の危険を防ぐため、小さな部品はお子様の手の届かないところに保管してください。
- 重要： Do not use prints made from this website or any digital source to mark distances for drilling. Due to individual printers and display settings, dimensions on installation instructions may not print or display at an accurate scale. Always use the physical template provided with the product or measure carefully.
4.インストールガイド
This section provides general steps for installing the Schlage F51A Georgian 505 entry door lock. For detailed, step-by-step instructions, refer to the specific installation template and guide included in your product packaging.
4.1 ドアの準備
- Ensure the door is properly bored for a standard door lock (typically 2-1/8 inch cross bore and 1 inch edge bore).
- Measure the backset (distance from the door edge to the center of the cross bore). Adjust the latch bolt if necessary to fit 2-3/8 inch or 2-3/4 inch backsets.
- Chisel out a mortise for the latch faceplate and strike plate on the door edge and frame, respectively, if not already present.
4.2 Install the Latch Bolt
- Insert the latch bolt into the edge bore of the door, ensuring the bevel of the latch faces the door frame.
- Secure the latch bolt with the provided screws. Choose the appropriate faceplate (1/4" Round Corner, Square Corner, or Drive-In) to match your door preparation.
4.3 Install the Knobs
- Insert the exterior knob assembly through the cross bore, ensuring the spindle engages with the latch mechanism.
- Place the interior knob assembly onto the spindle, aligning the mounting posts with the holes in the exterior assembly.
- Secure the interior and exterior assemblies together using the provided mounting screws. Tighten screws evenly to prevent binding.
- 注記： The unit is non-handed and field reversible, meaning it can be installed on either left or right-handed doors without modification.
4.4 ストライクプレートの取り付け
- Close the door and mark the position where the latch bolt strikes the door frame.
- Install the strike plate (Part 10-063) on the door frame, aligning it with the latch bolt. Use the appropriate strike plate (Square Corner or Round Corner Full Lip) for your frame.
- 付属のネジでストライクプレートを固定します。
4.5 テスト操作
After installation, test the lock's function with the door open and closed to ensure smooth operation.
5. 操作
5.1 Locking and Unlocking from the Exterior
- To unlock: Insert the key into the keyway and turn it.
- To lock: Turn the key to the locked position and remove it. The exterior knob will then be rigid.
5.2 Locking and Unlocking from the Interior
- To unlock: Rotate the turn-button on the interior knob.
- To lock: Rotate the turn-button on the interior knob to the locked position.
- Panic-Proof Feature: The interior knob always remains free, allowing for immediate exit even when the lock is engaged. Turning the interior knob will retract the latch bolt.
6. メンテナンス
Proper maintenance ensures the longevity and smooth operation of your Schlage lock.
- クリーニング： ロックの外側を柔らかくてきれいな布で拭いてください。amp 布で拭いてください。研磨剤入りの洗剤、溶剤、または刺激の強い化学薬品は、仕上げを傷める可能性があるため、使用しないでください。
- 潤滑: Periodically apply a small amount of graphite-based lubricant (do not use oil-based lubricants) into the keyway and the latch mechanism to ensure smooth operation.
- 検査： Regularly check all mounting screws for tightness. If the lock feels loose, gently tighten the screws.
- フィニッシュケア： The Lifetime Bright Brass finish is designed for durability. However, prolonged exposure to harsh weather or chemicals can affect its appearance.
7。 トラブルシューティング
If you encounter issues with your Schlage F51A Georgian 505 lock, refer to the following common problems and solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| キーが回らない、または固い。 | Dirt in keyway, worn key, or misaligned cylinder. | Clean keyway with compressed air. Apply graphite lubricant. Try a spare key. If issue persists, contact support. |
| ノブが緩んでいたりぐらついている。 | 取り付けネジが緩んでいます。 | Tighten the mounting screws on the interior knob assembly. |
| Latch bolt does not retract fully or binds. | Misalignment of lock components or strike plate. | Check alignment of latch bolt and strike plate. Ensure mounting screws are not overtightened, causing binding. Lubricate latch mechanism. |
| ドアがきちんと閉まらず、ラッチもかかりません。 | ストライクプレートのずれまたはドアのたわみ。 | ドア枠のストライクプレートの位置を調整してください。ドアヒンジのたわみがないか確認してください。 |
8. 仕様
- モデル番号: F51A GEO 505
- ブランド： シュラーゲ
- タイプ： Single Cylinder Entry Door Lock Knobset
- 仕上げる： Lifetime Bright Brass
- 材料： 真鍮
- スタイル： Traditional (Georgian)
- 特別な機能: Key Lock, Panic-Proof Interior Knob
- 製品寸法: 約4×6×5インチ
- 商品の重量: 約1.2ポンド
- 必要な電池: いいえ
- 原産国： メキシコ
9. 保証とサポート
Schlage products are backed by a manufacturer's warranty. For specific warranty details, please refer to the warranty information included with your product packaging or visit the official Schlage webサイト。
If you require technical assistance, have questions about installation, or need to report a missing/damaged part, please contact Schlage Customer Support. Contact information can typically be found on the Schlage webサイトまたは製品ドキュメントに記載されています。
オンラインリソース: www.schlage.com
