TP-Link AV200 Nano Powerline Adapter Starter Kit User Manual

1. はじめに

The TP-Link AV200 Nano Powerline Adapter Starter Kit (TL-PA2010KIT) provides a simple solution to extend your home network using your existing electrical wiring. This kit includes two powerline adapters that transform your electrical outlets into network connections, allowing you to connect devices such as computers, smart TVs, and gaming consoles to the internet without running new Ethernet cables.

These adapters are compliant with the HomePlug AV standard, offering data transfer rates of up to 200Mbps, suitable for HD video streaming and online gaming. Their compact design ensures they blend discreetly into any home environment.

2. パッケージ内容

パッケージに次のアイテムが含まれていることを確認してください。

• 2 x TL-PA2010 Powerline Ethernet Adapters
• イーサネットケーブル (RJ45)
• リソースCD
• クイックインストールガイド

Image: Contents of the TP-Link AV200 Nano Powerline Adapter Starter Kit, showing two adapters and an Ethernet cable.

3.製品オーバーview

Each TL-PA2010 adapter features a compact design with essential indicators and ports for easy operation.

3.1 外見

画像: 正面 view of a single TL-PA2010 adapter, highlighting the LED indicators and the 'pair' button.

3.2 LEDインジケーター

• 電源LED（緑): Indicates the powerline adapter is powered on.
• パワーラインLED（緑): Indicates a powerline connection is established. Blinks when data is being transmitted.
• イーサネット LED (緑): Indicates an Ethernet connection is established. Blinks when data is being transmitted.

3.3 ボタンとポート

• ペアボタン： Used to establish a secure powerline network connection.
• イーサネットポート (RJ45): Connects the adapter to network devices such as computers, routers, or gaming consoles using an Ethernet cable.

4. セットアップ

Setting up your TP-Link AV200 Nano Powerline Adapter Starter Kit is a simple plug-and-play process. No software configuration is typically required for basic operation.

4.1基本的なインストール

1. Plug in Adapter 1: Plug one TL-PA2010 adapter into a wall outlet near your router.
2. ルーターに接続: Connect Adapter 1 to an available LAN port on your router using the provided Ethernet cable.
3. Plug in Adapter 2: Plug the second TL-PA2010 adapter into a wall outlet in the room where you need internet access.
4. デバイスに接続します: Connect Adapter 2 to your network device (e.g., computer, smart TV, game console) using another Ethernet cable.

Once both adapters are plugged in and connected, the Powerline LED and Ethernet LED on both adapters should illuminate, indicating a successful connection. If the Powerline LED is off, refer to the Troubleshooting section.

Image: Setup diagram illustrating how to connect the powerline adapters to a router and an end device.

4.2 Securing Your Powerline Network (Pairing)

For enhanced security, you can pair your powerline adapters to create a private network. This is recommended if you have multiple powerline devices or if you are concerned about network security.

1. Ensure both adapters are plugged into wall outlets and powered on.
2. を押す ペア button on one adapter for 1 second. The Power LED will start blinking.
3. XNUMX分以内に、 ペア button on the second adapter for 1 second. The Power LED on this adapter will also start blinking.
4. When the Powerline LED on both adapters turns solid, the pairing process is complete, and your powerline network is secured.

注記： For optimal performance, plug powerline adapters directly into wall outlets. Avoid power strips, surge protectors, or extension cords, as these can interfere with powerline communication.

5. Operating the Powerline Adapters

Once installed, your powerline adapters operate automatically, extending your network connection. They function as a transparent bridge, allowing any Ethernet-enabled device to connect to your network via the electrical wiring.

5.1 Connecting Additional Devices

You can add more powerline adapters (TL-PA2010 or compatible HomePlug AV adapters) to your existing powerline network. Simply plug the new adapter into a wall outlet and pair it with an existing adapter as described in Section 4.2.

5.2ネットワークパフォーマンス

The actual data transfer rate can vary based on several factors, including:

• Distance between adapters
• Quality of electrical wiring
• Electrical noise from other appliances
• ネットワークトラフィック
• Building materials and construction

While the theoretical maximum speed is 200Mbps, real-world performance will be lower. However, it should be sufficient for typical internet activities like browsing, streaming, and online gaming.

6. メンテナンス

The TP-Link AV200 Nano Powerline Adapters are designed for low maintenance. Follow these guidelines for optimal performance and longevity:

• 壁コンセントへの直接接続: Always plug the adapters directly into a wall outlet. Avoid power strips, surge protectors, or extension cords, as they can degrade performance or block the powerline signal.
• クリーニング： アダプターの清掃には、柔らかく乾いた布をご使用ください。液体クリーナーやエアゾールクリーナーは使用しないでください。
• 省電力モード： The adapters feature an automatic power-saving mode that reduces power consumption by up to 75% when no data transmission occurs for a certain period. This helps conserve energy without requiring manual intervention.
• 環境条件: Operate the adapters within their specified temperature and humidity ranges to prevent damage.

7。 トラブルシューティング

If you encounter issues with your powerline adapters, refer to the following common problems and solutions:

7.1 No Powerline Connection (Powerline LED is off)

• 電力を確認します: Ensure both adapters are plugged into live wall outlets and powered on.
• 直接接続: Confirm that adapters are plugged directly into wall outlets, not into power strips, surge protectors, or extension cords.
• 電子回路： Powerline adapters work best when on the same electrical circuit. If they are on different circuits, the signal might be weak or non-existent. Try moving the adapters to outlets on the same circuit.
• 干渉： Large power-consuming appliances (e.g., washing machines, refrigerators, air conditioners) can cause interference. Try plugging the adapters into different outlets away from such devices.
• ペアリング: If you have multiple powerline devices or if the adapters were previously used in another network, they might need to be re-paired. Follow the pairing instructions in Section 4.2.

7.2 ネットワーク速度が遅い

• 直接接続: Ensure adapters are plugged directly into wall outlets.
• 電気ノイズ: Disconnect other electrical devices from nearby outlets to check for interference.
• 距離： The further apart the adapters are, or the more complex the electrical wiring path, the slower the speed.
• サーキットブレーカー： Electrical circuits passing through different circuit breakers can reduce performance.
• ケーブル品質： Ensure the Ethernet cables used are in good condition and properly connected.

7.3 No Internet Access on Connected Device

• ルーターの確認: Verify that your router has an active internet connection.
• イーサネット接続: Ensure the Ethernet cables are securely connected to both the powerline adapter and your device/router. The Ethernet LED on the adapter should be lit.
• Adapter Status: Check the Powerline LED on both adapters. If it's off, refer to "No Powerline Connection" above.
• リブート： Try unplugging both powerline adapters and your router for a few seconds, then plug them back in.

8. 仕様

注記： Theoretical maximum channel data transfer rate is derived from HomePlug AV2 specifications. Actual data transfer rate will vary from network environment including: distance, network traffic, noise on electrical wires, building material and construction, quality of electrical installation and other adverse conditions.

9. 保証と技術サポート

For warranty information and technical support, please refer to the documentation included with your product or visit the official TP-Link website. TP-Link provides comprehensive support resources, including FAQs, troubleshooting guides, and contact information for customer service.

TP-Link公式 Webサイト： www.tp-link.com