導入
The Savio BF500 Black Foam Cartridge is designed for sealing and filling gaps in pond and water feature applications. This black-colored foam blends naturally with rocks and liners, providing a waterproof seal. It is suitable for securing rocks, diverting water flow, and sealing cracks or crevices in aquatic environments. This product requires a gun foam applicator, which is sold separately.
安全情報
- Always wear appropriate personal protective equipment, including safety glasses and chemical-resistant gloves, during application.
- Ensure adequate ventilation in the work area to avoid inhaling vapors.
- お子様やペットの手の届かない場所に保管してください。
- この製品は可燃性です。熱、火花、裸火、高温の表面から遠ざけてください。禁煙です。
- Avoid skin and eye contact. In case of contact, rinse immediately with plenty of water and seek medical advice.
- Dispose of empty cartridges and cured foam according to local regulations.
設定
- 表面を準備する: Ensure the application surface is clean, dry, and free of loose debris, oil, or grease. Lightly misting the surface with water can improve adhesion and aid in curing.
- アプリケーターを取り付ける: Screw the Savio BF500 cartridge firmly onto a compatible gun foam applicator (sold separately). Ensure a tight seal to prevent leakage.
- よく振ってください: Shake the cartridge vigorously for at least 30 seconds before use to ensure proper mixing of contents. Repeat shaking periodically during application.
- テストアプリケーション: Before applying to the desired area, dispense a small amount of foam onto a scrap surface to ensure proper flow and expansion.
操作手順
The Savio BF500 Black Foam expands slowly, allowing for controlled application and filling of voids. Its black color helps it blend seamlessly with natural pond environments.
- 応用: Hold the applicator gun with the cartridge inverted (valve down) during application. Apply foam into gaps, cracks, or around rocks where sealing is required. Fill voids approximately 30-50% as the foam will expand significantly.
- Controlling Flow: Adjust the trigger on the gun foam applicator to control the flow rate of the foam. Apply in a steady, even bead.
- Expansion and Curing: The foam will begin to expand and cure upon contact with moisture in the air and on the surface. Full cure time can vary depending on temperature, humidity, and foam thickness, but typically takes several hours. Avoid disturbing the foam during the curing process.
- Trimming (Optional): Once fully cured, excess foam can be carefully trimmed with a utility knife if necessary.


メンテナンス
Proper maintenance of your gun foam applicator is crucial for its longevity and effective use with Savio BF500 cartridges.
- アプリケーターのクリーニング: After each use, immediately clean the gun foam applicator with a compatible foam gun cleaner. Follow the cleaner manufacturer's instructions. Failure to clean the applicator promptly can lead to cured foam blocking the mechanism.
- カートリッジの保管: Store unused cartridges in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the valve is clean and free of cured foam before storage.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Foam does not dispense or dispenses poorly. | Cartridge not shaken sufficiently; applicator gun clogged; cartridge too cold; valve blocked. | Shake cartridge vigorously. Clean applicator gun thoroughly. Warm cartridge to room temperature. Check and clear any blockage around the valve. |
| Foam expands unevenly or cures slowly. | Insufficient moisture on surface; low humidity; improper mixing. | Lightly mist the application surface with water. Ensure adequate ventilation and humidity. Shake cartridge well before and during use. |
| Can runs out of propellant before foam is fully dispensed. | Improper storage; can used in incorrect orientation (not inverted). | Store cartridges in a cool, dry place. Always use the applicator gun with the cartridge inverted (valve down) to ensure propellant is utilized efficiently. |
仕様
- 製品名: Savio Black Foam Cartridge
- モデル: BF500
- 音量: 24液量オンス(1パック)
- 色: 黒
- 応用: Requires gun foam applicator (sold separately)
- パッケージ寸法: 10.6 x 2.3 x 2.2インチ
- 商品の重量: 2ポンド
- メーカー: サビオエンジニアリング
- ASIN: B004VM9ESW
保証とサポート
For warranty information, technical support, or any product-related inquiries, please contact Savio Engineering customer service directly. Refer to the product packaging or the official Savio web現在の連絡先の詳細については、サイトをご覧ください。
Savio Official Webサイト: Visit the Savio Store on Amazon





