導入
This manual provides essential instructions for the installation, operation, and maintenance of your Blade 120SR Battery Mount (Part Number BLH3123). Please read this manual thoroughly before proceeding with any procedures to ensure proper function and longevity of the component.
安全上の注意
- Always disconnect the battery from the aircraft before performing any installation or maintenance.
- Use appropriate tools to avoid damaging the component or surrounding parts.
- 小さな部品はお子様の手の届かないところに保管してください。
パッケージ内容
- 1x Blade 120SR Battery Mount (BLH3123)
- (Additional fasteners or components may be included depending on the specific kit)
セットアップとインストール
This section details the steps required to install the Blade 120SR Battery Mount onto your aircraft.
- 準備： Ensure the aircraft's power is off and the battery is disconnected. Place the aircraft on a stable, clean surface.
- Remove Old Mount (if applicable): Carefully unscrew and remove the existing battery mount from the aircraft chassis. Note the orientation and attachment points.
- Position New Mount: Align the new Blade 120SR Battery Mount (BLH3123) with the designated mounting points on the aircraft frame. Ensure the orientation matches the original component.
- セキュアマウント： Using the appropriate small screws (typically M1 or M2, not included with mount unless specified), gently secure the battery mount to the chassis. Do not overtighten screws, as this can strip the plastic or threads.
- インストールの確認: Gently tug on the installed mount to ensure it is firmly attached and does not wobble.
Image: The Blade 120SR Battery Mount (BLH3123) showing its structure and mounting points. This component is designed to securely hold the battery in place on the Blade 120SR helicopter.
操作手順
Once the battery mount is installed, follow these steps to properly secure and use your battery.
- 電池を挿入します: Slide the compatible battery into the designated slot on the battery mount. Ensure it fits snugly without excessive force.
- 安全なバッテリー: If your aircraft model includes a battery strap or clip, use it to further secure the battery in the mount. This prevents movement during flight.
- バッテリーを接続します: Connect the battery's power lead to the aircraft's power connector.
- 飛行前チェック: Before flight, always perform a visual inspection to confirm the battery is securely seated and the mount is intact.
メンテナンス
Regular inspection and maintenance will help prolong the life of your battery mount.
- 目視検査: Periodically inspect the battery mount for any signs of cracks, stress marks, or deformation, especially after hard landings or impacts.
- クリーニング： If necessary, gently clean the mount with a soft, dry cloth to remove dust or debris. Avoid using harsh chemicals.
- ファスナーチェック: Ensure all screws securing the mount are tight. Retighten if loose, but do not overtighten.
- 交換： If the mount shows significant wear, damage, or no longer holds the battery securely, replace it immediately with a genuine Blade BLH3123 part.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Battery mount is loose. | 取り付けネジが緩んでいるか、剥がれています。 | Tighten screws. If threads are stripped, consider using a slightly larger screw (if safe for the aircraft) or replacing the mount/chassis part. |
| Battery does not fit securely. | Incorrect battery size or damaged mount. | Ensure you are using the correct battery for the Blade 120SR. Inspect the mount for damage and replace if necessary. |
| Mount is cracked or broken. | 衝撃による損傷または材料の疲労。 | Replace the battery mount with a new Blade BLH3123 part. |
仕様
- モデル： BLH3123
- ブランド： ブレード
- メーカー: ホライゾンホビー
- 製品寸法: 3 x 2 x 0.66 インチ (7.62 x 5.08 x 1.68 cm)
- 商品の重量: 0.16オンス（4.54グラム）
- 推奨年齢: 14歳以上
- ASIN: B003TRNTCW
保証とサポート
For warranty information or technical support regarding your Blade 120SR Battery Mount, please contact Horizon Hobby directly. Refer to the official Horizon Hobby web最新の連絡先情報および保証条件については、当社の Web サイトまたは製品パッケージをご覧ください。
メーカー: ホライゾンホビー
Webサイト： www.horizonhobby.com
