1.製品オーバーview
The Body-Solid GDR44B Vertical Dumbbell Rack is designed to provide a space-efficient and secure storage solution for your hex dumbbells. Constructed from heavy-gauge steel, this rack ensures stability and durability for both home and commercial gym environments. Its unique offset design allows for easy access to up to six pairs of hex dumbbells, typically ranging up to 35 pounds per dumbbell. The vertical orientation minimizes floor space usage, making it an ideal addition to any fitness setting where space is a consideration.
Figure 1: Body-Solid GDR44B Vertical Dumbbell Rack fully assembled with hex dumbbells.
2. セットアップと組み立て
Assembly of the Body-Solid GDR44B Vertical Dumbbell Rack is straightforward and typically takes approximately 20 minutes. While specific step-by-step instructions are not always provided, the design is intuitive. Ensure all components are present before beginning assembly.
2.1 必要なツール（付属していません）
- 17mm ratchet/socket
- 17mm box wrench or adjustable crescent wrenches
2.2 組み立て手順:
- Begin by attaching the four feet to the bottom frame of the rack.
- Secure the two center plastic components onto the bottom frame.
- Bolt the end pieces to the bottom frame.
- Attach the vertical side supports to the bottom frame.
- Connect the top piece to the vertical supports, ensuring all bolts are tightened securely.
- Verify all connections are firm and stable before loading dumbbells.
Figure 2: The dumbbell rack prior to loading weights.
Figure 3: Dimensions of the Body-Solid GDR44B Vertical Dumbbell Rack (17"D x 27"W x 44"H).
3. 操作と使用
The GDR44B rack is designed for easy and safe storage of your dumbbells. Its offset tiers and robust construction ensure that weights are held securely and are simple to access.
3.1 Loading Dumbbells:
- Grasp the dumbbell firmly by its handle.
- Align the dumbbell with the designated tier slot. The rack's design accommodates various dumbbell shapes, including hex and square Peloton dumbbells.
- Gently place the dumbbell into the slot. The secure fit prevents accidental dislodgement.
- The spacing between tiers is optimized to prevent weights from bumping into each other, especially for larger dumbbells at the bottom.
3.2 Unloading Dumbbells:
- Grasp the desired dumbbell firmly.
- Lift the dumbbell straight out of its slot. The design provides ample room for your hand to comfortably retrieve the weight.
3.3 Additional Storage:
The bottom section of the rack features crossbar feet, which can be utilized for storing smaller neoprene dumbbells, kettlebells, or other workout accessories. The flat platform top also provides a convenient surface for items like water bottles or workout gloves.
Figure 4: Hex dumbbells securely stored on the rack.
Figure 5: Round dumbbells also fit securely on the rack.
4. メンテナンス
Regular maintenance ensures the longevity and safe operation of your dumbbell rack.
- クリーニング： Wipe down the rack periodically with a damp cloth to remove dust and sweat. Avoid abrasive cleaners that could damage the powder-coated finish.
- 検査： Routinely check all bolts and connections to ensure they remain tight. Tighten any loose hardware to maintain stability.
- 床の保護: The rack features non-skid rubber feet to protect your flooring and enhance stability. Ensure these feet are intact and properly positioned.
5。 トラブルシューティング
If you encounter any issues with your dumbbell rack, consider the following:
- ぐらつき/不安定さ: Ensure the rack is placed on a level surface. If your floor is uneven, use shims (not included) under the feet to stabilize the unit. Re-check and tighten all assembly bolts.
- Dumbbells Not Fitting: This rack is designed for hex dumbbells up to 35 pounds. Ensure your dumbbells have a handle length compatible with the rack's design (typically around 5 inches for hex dumbbells).
- 傷/摩耗: The rack is built with a scratch-resistant powder-coated finish. Minor scratches can be touched up with appropriate paint (a small bottle of silver touch-up paint may be included with the product).
6. 仕様
| 特徴 | 仕様 |
|---|---|
| ブランド | ボディ-ソリッド |
| モデル名 | Body-Solid GDR44 2 Tier Vertical Dumbbell Rack |
| 部品番号 | GDR44B |
| 材料 | Steel (Powder-coated) |
| 製品寸法（長さx幅x高さ） | 27インチ x 17インチ x 44インチ（インチ） |
| アイテム重量 | 13キログラム（約28.6ポンド） |
| 階層数 | 6 pairs (12 dumbbells) |
| 重量制限 | Up to 35 Pounds per dumbbell |
| フレームタイプ | Aフレーム |
| 色 | 黒 |
Figure 6: The rack's compact footprint on a gym mat.
Figure 7: The rack accommodates various styles of hex dumbbells.
7. 保証とサポート
The Body-Solid GDR44B Vertical Dumbbell Rack comes with a limited lifetime manufacturer's warranty against defects in materials and workmanship. This warranty covers all parts of the dumbbell rack for as long as you own it, specifically for in-home use.
For warranty claims or technical support, please refer to the contact information provided with your product packaging or visit the official Body-Solid webサイト。
