マニュアル+

AMAZON CON4

AMAZON CON4 Sauna Stove Controller Instruction Manual

Model: CON4

Brand: AMAZON

1. はじめに

This manual provides detailed instructions for the installation, operation, and maintenance of the AMAZON CON4 Sauna Stove Controller. Please read this manual thoroughly before installation and use to ensure safe and efficient operation of your sauna heater.

2. 安全情報

警告: 電気設備の設置は、地域および国のすべての電気規則に従って、資格のある電気技師のみが行う必要があります。

  • Always disconnect power to the sauna heater before performing any installation, maintenance, or troubleshooting.
  • Do not operate the controller with wet hands or in wet conditions.
  • すべての接続が安全かつ適切に絶縁されていることを確認してください。
  • Keep the control panel and control box away from water and high humidity.
  • This device is intended for controlling sauna stoves. Do not use it for other purposes.

3. パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認します。

  • AMAZON CON4 Control Panel
  • Control Box (Power Unit)
  • Temperature Probe Cable
AMAZON CON4 Sauna Stove Controller components
図1：以上view of the CON4 Sauna Stove Controller components, including the control panel, control box, and temperature probe cable.

4. 仕様

特徴詳細
モデルCON4
タイプHand Tool Parts (Sauna Stove Controller)
起源中国本土
メーカーQianwang sauna swimming pool equipment
Control Panel Dimensions (approx.)24.5 cm x 21 cm x 10 cm
パッケージ重量（約）7.0キロ
パッケージ寸法（約）45 cm x 45 cm x 45 cm
CON4 Control Panel Dimensions
Figure 2: Image indicating the model CON4 and its approximate dimensions (24.5*21*10cm for the single controller).

5. インストールとセットアップ

Proper installation is crucial for the safe and effective operation of the sauna stove controller. It is highly recommended that installation be performed by a certified electrician.

5.1 コンポーネントの識別

主なコンポーネントについて理解しましょう。

  • コントロールパネル： The user interface for setting time and temperature.
  • コントロールボックス： The main power unit that connects to the sauna heater and power supply.
  • 温度プローブ： Measures the room temperature in the sauna.
CON4 Control Panel with Temperature Probe
Figure 3: The CON4 control panel shown with its temperature probe cable. The probe cable connects to the control panel.

5.2配線接続

The control box handles the main electrical connections to the sauna heater and the power supply. The control panel connects to the control box, and the temperature probe connects to the control panel.

  1. 取り付け: Securely mount the control box and control panel in appropriate locations. The control panel should be easily accessible to the user, while the control box can be mounted in a less visible, but well-ventilated area.
  2. 電源： Connect the main power supply to the control box. Ensure the voltage and current ratings match your sauna heater and local electrical standards.
  3. Sauna Heater Connection: Connect the sauna heater's power cables to the designated terminals within the control box.
  4. コントロールパネル接続: Connect the control panel to the control box using the provided cable.
  5. Temperature Probe Installation: Install the temperature probe inside the sauna room, typically on a wall at a recommended height (refer to your sauna heater's manual for specific placement). Connect the temperature probe cable to the designated port on the control panel.

CAUTION: Incorrect wiring can lead to electric shock, fire, or damage to the equipment. Always consult a professional for electrical installation.

6. 操作手順

The CON4 control panel features an intuitive interface for managing your sauna experience.

CON4 Control Panel Interface
図 4: 拡大図 view of the CON4 control panel, showing digital displays and control buttons.

6.1コントロールパネルオーバーview

コントロール パネルには次のものが含まれます。

  • デジタルディスプレイ: Two displays show "Time Remaining" and "Room Temperature".
  • ボタン:
    • 時間設定: Adjusts the sauna operating time.
    • 設定温度: Adjusts the desired sauna room temperature.
    • Mode A/B: Selects between different operating modes (details may vary, refer to specific sauna heater manual).
    • ライトのオン/オフ： Controls the sauna room lighting.
    • オン/オフ: Powers the sauna heater on or off.
    • 上/下矢印: 時間と温度の設定を増減するために使用します。

6.2 基本操作

  1. 電源オン/オフ: を押す オン/オフ button to turn the sauna heater system on or off.
  2. 設定時間:
    1. を押す 時間を設定する ボタン。
    2. 使用 上/下矢印 to adjust the desired operating time.
    3. The display will show the remaining time during operation.
  3. 設定温度：
    1. を押す 温度設定 ボタン。
    2. 使用 上/下矢印 to adjust the desired room temperature.
    3. ディスプレイに現在の室温が表示されます。
  4. Controlling Light: を押す ライトのオン/オフ button to toggle the sauna room light.
  5. モード選択: If your sauna heater supports multiple modes, press the Mode A/B 切り替えるためのボタンです。

7. メンテナンス

Regular maintenance ensures the longevity and proper functioning of your sauna stove controller.

  • クリーニング： Wipe the control panel with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • 検査： すべての配線接続部の締め付け具合や摩耗や損傷の兆候がないか定期的に確認してください。
  • 環境： Ensure the control panel and control box are kept in a dry environment, free from excessive dust or moisture.

WARNING: Always disconnect power before cleaning or inspecting the control box or any electrical components.

8。 トラブルシューティング

If you encounter issues with your sauna stove controller, try the following basic troubleshooting steps:

  • 電源なし:
    • Check the main power supply to the control box.
    • すべての電気接続が安全であることを確認してください。
    • 確認する オン/オフ ボタンが押されました。
  • 温度の読み取りが不正確:
    • Ensure the temperature probe is correctly installed and connected to the control panel.
    • Check for any obstructions around the temperature probe that might affect its reading.
  • Sauna Heater Not Heating:
    • Verify that the desired temperature is set higher than the current room temperature.
    • Check the operating time setting; ensure sufficient time is allocated.
    • Confirm that the sauna heater itself is functioning correctly (refer to the sauna heater's manual).

問題が解決しない場合は、カスタマー サポートにお問い合わせください。

9. ユーザーのヒント

To enhance your sauna experience and ensure the longevity of your equipment:

  • For optimal sauna experience, allow the sauna heater to preheat for at least 30-60 minutes before use.
  • Always ensure proper ventilation in the sauna room.
  • Regularly check the sauna stones and replace them if they are cracked or crumbling.

10. 保証とサポート

10.1 保証情報

The AMAZON CON4 Sauna Stove Controller comes with the following warranty:

  • Main Electrical Components: One (1) year free warranty from the date of purchase for material and quality issues. This warranty does not cover accessories or other non-electrical parts.
  • 加熱チューブ: Three (3) months or ninety (90) days warranty.

The company reserves the right to choose between repair or replacement. Any returns for repair must be pre-approved by the company. Return shipping costs are the responsibility of the customer.

保証は、以下の原因による損傷には適用されません。

  • Incorrect use or operation.
  • Negligence or accidental breakage.
  • Improper power connection.
  • Modification or repair by unauthorized personnel.

After the warranty period, paid repair services are available, covering material costs for parts and travel expenses.

After-sales service policy in Chinese
Figure 5: Original after-sales service policy document (in Chinese).

10.2 カスタマーサポート

ご質問、技術サポート、保証請求については、下記までお問い合わせください。

  • WhatsApp: +86 155766507
  • メールアドレス: 1434250503@qq.com
  • 微信: 15576650740