1. はじめに
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of the Samsung Washing Machine PCB Control Panel Display Board (Models DC92-00248E, DC41-00104B). This component is a critical replacement part designed to restore the full functionality of your Samsung drum washing machine's control and display interface. Please read this manual thoroughly before attempting any installation or repair.
2. 安全情報
警告: 感電の危険があります
- Always disconnect the washing machine from the main power supply before attempting any installation, repair, or maintenance.
- Only qualified technicians or individuals with appropriate electrical knowledge should attempt to replace this component.
- Wear appropriate personal protective equipment (PPE), including insulated gloves, during installation.
- Ensure all connections are secure and correctly made before restoring power to the appliance.
- Do not operate the washing machine if the control board or any electrical component is damaged or exposed to moisture.
3.製品オーバーview
The PCB Control Panel Display Board is the central interface for controlling and monitoring your Samsung drum washing machine. It integrates the electronic circuitry for program selection, cycle timing, and displaying operational status and error codes.
4. セットアップとインストール
This control board is a direct replacement part. Proper installation is crucial for the safe and correct functioning of your washing machine. It is highly recommended that installation be performed by a certified appliance technician.
- 電源を切る: 洗濯機の電源プラグを壁のコンセントから抜きます。
- アクセス コントロール パネル: Depending on your specific Samsung washing machine model, you may need to remove the top panel or front fascia to access the existing control board. Refer to your washing machine's service manual for exact instructions.
- ドキュメント接続: Before disconnecting any wires, take clear photos of all wiring connections to the old PCB. Note the position and color of each wire.
- 古いボードを取り外します: 古い制御ボードを固定しているすべての配線ハーネスと取り付けネジを慎重に外します。
- 新しいボードをインストールします: Position the new PCB Control Panel Display Board in the same location as the old one. Secure it with the appropriate screws.
- 配線を再接続します: Using your documented photos, carefully reconnect all wiring harnesses to the new board. Ensure each connector is firmly seated.
- アプライアンスの再組み立て: Reattach any panels or fascia removed during the process.
- テスト機能: Plug the washing machine back into the power outlet. Perform a test cycle to ensure all functions (power, display, program selection, water fill, spin, etc.) are working correctly.
5. 操作手順
This PCB Control Panel Display Board enables the operation of your Samsung washing machine. Once installed, operate your washing machine according to its original user manual. The board facilitates the following core functions:
- 電源オン/オフ
- Program Selection (e.g., Cotton, Synthetics, Delicates)
- Cycle Start/Pause
- Display of remaining time, error codes, and selected options
- Adjustment of temperature, spin speed, and rinse cycles
If the washing machine does not respond as expected after installation, refer to the Troubleshooting section.
6. メンテナンス
The PCB Control Panel Display Board is a sealed electronic component and generally requires no routine maintenance. To ensure its longevity and proper function:
- Keep the washing machine's control panel clean and dry. Avoid using abrasive cleaners or excessive moisture.
- Protect the washing machine from extreme temperatures and humidity.
- Ensure the washing machine is properly grounded to prevent electrical surges.
7。 トラブルシューティング
If you encounter issues after installing the new control board, consider the following:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Washing machine does not power on | 電源接続が緩んでいる、コンセントに不具合がある、配線が間違っている。 | Check power cord, test outlet, re-verify all wiring connections to the PCB. |
| Display is blank or shows incorrect characters | Loose display ribbon cable, faulty display component. | Ensure display ribbon cable is securely connected. If issue persists, the display component may be faulty. |
| ボタンが反応しない | Loose button connections, faulty buttons. | Check connections to the button array. Ensure no debris is obstructing buttons. |
| Washing machine displays an error code | Specific appliance fault. | Refer to your washing machine's original user manual for the meaning of the error code and recommended solutions. |
トラブルシューティング手順を実行しても問題が解決しない場合は、資格のあるサービス技術者に連絡してください。
8. 仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | DC92-00248E, DC41-00104B |
| 材料 | 複合 |
| 厚さ | 0.6mm |
| タイプ | ベニヤ |
| 形 | I |
| 起源 | 中国本土 |
| 懸念される化学物質 | なし |
| カスタマイズ | いいえ |
| パッケージ重量 | 1.0キロ |
| パッケージの寸法（L x W x H） | 20 cm x 20 cm x 15 cm |
9. ユーザーのヒント
- 購入前に必ずモデルの互換性を確認してくださいasing a replacement part.
- When handling the PCB, avoid touching the electronic components directly to prevent static discharge damage.
- Keep the work area clean and well-lit during installation.
10. サポート
この製品に関する詳細なサポートや技術的なお問い合わせについては、販売元または資格のある家電修理専門家にお問い合わせください。
