J-TECH DIGITAL JTD-3192 HDMI Extender Over Ethernet
Safety Instructions
- Before using this product, please carefully read the following safety instructions to ensure its proper use and keep this manual for future reference.
- To prevent an electric shock, do not attempt to open the product.
- Only qualified personnel should perform any repairs or maintenance.
- Always place the product on a stable, flat surface to prevent it from falling.
- Do not expose the product to water, moisture, or high-humidity environments to avoid the risk of damage.
- To prevent damage from direct sunlight or high temperatures, do not expose the product to such environments.
- Do not place the product near heat sources like radiators, heat registers, stoves, or other heat-producing apparatuses.
- Do not place any objects on top of the product to avoid damage.
- Use only the attachments and accessories specified by the manufacturer.
- During lightning storms or prolonged periods of disuse, unplug the power supply to prevent damage.
Introduction
The HDMI Extender Set, Full HD offers an extender solution of up to 50m(165ft) for the highest demands. It is used to transmit digital video and audio signals to a maximum length of up to 50m(165ft). The highest supported video resolution is 1080P@60Hz. The transmitter unit features an EDID setting, which can be used to solve the compatibility issue for no image or sound. It features a PoC (power over cable) function, enabling the receiver or transmitter to be powered from the other side by a single 12V power supply.
Packing Contents
- Main Unit TX&RX
- DC 12V Power Adapter with Screw
Feature
- Extends the maximum length for HDMI cable to up to 50m(165ft) via a simple network cable
- Support HDCP 1.3
- Highest supported video resolution: 1080P@60Hz
- Supports CAT 6, CAT 6A, CAT 7 network cables
- EDID setting – Allows you to copy the display EDID information when connected with the transmitter unit’s HDMI Input port after long pressing the EDID button for 3s, and long press to 6s, the transmitter unit will restore the default 1080p EDID
- Uncompressed and zero latency.
- Plug and pla, without installation.
Panel Description
- DC 12V: DC 12V In
- LAN/POC: UTP Cable Connection Port for signal out
- EDID: Press to copy the connected display EDID for long press 3s and restore the default 1080p EDID for long press 6s
- HDMI input: Connect to Input Sources via HDMI Male Input Port
- Status: Signal Status Indicator
- Power: Power LED Indicator
- LAN: UT p Cable Connection port for Signal In
- HDMI out: Connect to Output Devices via HDMI Male Output Pod
Transmitter:
- Light on for connection with the HDMI Input Source
- Light off for no HDMI input source
Receiver:
- Light on for Connected with the HDMI Output Display, and the HDMI Input Source and UTP Cable Connect with the Receiver
- Light off for no Display or HDMI Input Source or UTP Cable connected with the Receiver.
Connection Diagram.
Specification
| Input Ports | HDMI x 1 RJ45 x 1 |
| Output Ports | HDMI x 1, RJ45 x 1 |
| Extensions Distance | 50m(164 feet) for 1080P@60Hz |
| Vertical Frequency Range | 50/60Hz |
| Interlaced Resolutions(50&60Hz) | 480i,576i,1080i |
| Progressive Resolutions(50&60Hz) | 480p,576p,720p,1080P |
| Limited Warranty | 1-Year Parts and Labor |
| Operating Temperature | O ‘C to 50 C |
| Storage Humidity | 5% to 90% RH non-condensation |
| Power Supply | DC 12V |
| Power Consumption (Max) | TX: <1W, RX: <1W |
| Extender Unit Cert | FCC, CE, RoHS |
| Power Supply Cert | FCC, CE, RoHS |
| Dimension(LxWxH) | TX/RX: 84.4×49.15×24.2mm |
| Net Weight | TX: 61g, RX: 64g |
| Material | Aluminium Alloy |
| User Manual | English Version |
Troubleshooting
| Problems | Causes | Solutions |
| Non-power-connect
ed/all LED off |
Maybe the power supply is not connecting well or the wrong power adapter is. | Please check if the power supply is connecting well and if the output voltage value is correct as recommended. |
| No sound or sound issues | Maybe the HDMI connection is not good; or the audio format is not supported by the displays, or the source player set another port to output audio | Please check if the HDMI cables are connecting well; if the audio format is not supported by the displays, customers can change to the supported audio format or the player’s audio output is setting HDMI audio output or not, and customers also can use the EDID
Setting function for copying the supported audio EDID information for long press EDID button for 3s |
| No picture or picture
flicker |
Maybe the HDMI cable quality and UTP cable quality are not good enough or are not connecting well. | Please check if the HDMI and UTP connection is good, or change to another good quality HDMI standard HDMI cable or UTP(CAT6 or better cable is recommended) cable to solve the issue. Customers also use the EDID setting function to copy the supported video EDID information for a long time by pressing the EDID button for 3 |
Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner, or benzene to clean.
Warranty
If your product does not work properly because of a defect in materials or workmanship, our company (referred to as “the warrantor”) will, for the length of the period indicated below, “Parts and Labor (1) Year” which starts with the date of original purchase (“Limited Warranty Period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor. During the “Labor” limited warranty period, there will be no charge for labor. During the “Pans’ warranty period, there will be no charge for parts. You must maintain your product during the warranty period. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. A purchase receipt or other proof of original purchase date is required for Limited Warranty service.
Mail-In Service
When shipping the unit, carefully pack and send it prepaid, adequately insured, and preferably in the original carton. Include a letter detailing the complaint and provide a daytime phone and/or email address where you can be reached.
Limited Warranty Limits and Exclusions
This Limited Warranty ONLY COVERS failures due to defects in material or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages that occurred in shipment, failures that are caused by products not supplied by the warrantor or failures that result from accidents, misuse, or abuse. Neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, mis-adjustment of consumer controls, improper maintenance, power line surge, and lightning damage. Modification, or service by anyone other than a Factory Service center or other Authorized Servicer, or damage that is attributed to acts of God. There are no express warranties except as listed under “Limited Warranty Coverage”.
The warrantor is not liable for incidental or consequential damages resulting from the use of this product or arising out of any breach of this warranty. ( As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to and from the service, and loss of or damage to media or images, data, or other recorded content The items listed are not exclusive but are for illustration onlyPartsrts and services, which are not covered by this limited warranty, are your responsibility.
Scan the QR code below or visit
https://resource.jtechdigitaI.com/products/3192 to view and access detailed digital resources regarding this unit.
- WWW.JTECHDIGITAL.COM
- PUBLISHED BY J-TECH DIGITAL INC.
- 9807 EMILY LANE
- STAFFORD, TX 77477
- TEL: 1-888-610-2818
- E-MAIL: SUPPORT@JTECHDIGITAL.COM
Documents / Resources
 |
J-TECH DIGITAL JTD-3192 HDMI Extender Over Ethernet [pdf] User Manual JTD-3192, A57_PET50EP, JTD-3192 HDMI Extender Over Ethernet, JTD-3192, HDMI Extender Over Ethernet, Extender Over Ethernet, Over Ethernet, Ethernet |