J-Tech Digital JTECH-4KPIP0401 4K x 2K 4-Port HDMI Switch with PIP
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before connecting, operating, or adjusting this product. Please keep this manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shocks, lightning strikes, etc. The use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.
Introduction
This high-performance HDMI switcher can switch any of the 4 HDMI sources to an HDMI display. It supports resolutions up to 4K×2K@30Hz. It supports PIP (Picture in Picture) and automatic switch functions via IR remote. With its 3Gbps bandwidth and the additional features with the latest HDMI standards. Flexible control via front panel button and IR remote.
Features
- HDMI 1.4a, HDCP1.4, and DVI 1.0 compliant
- Supports 4 HDMI inputs and 1 HDMI output
- Video resolution up to 4K×2K@30Hz
- Supports color deep up to 30bit, 36bit, 48bit per pixel
- Supports PIP and automatic switch functions via IR remote, and PIP contains 1 main picture and 3 sub-picture.
- Supports HDMI audio format including DTS-HD/Dolby-true-HD/LPCM 7.1/DTS/Dolby-AC3/DSD
- Supports all 3D video formats including frame pack up to 297MHz TMDS clock
- Control is via the front panel button and IR remote
Package Contents
- 1× 4×1 4K×2K HDMI Switcher
- 1× 5V/1A DC Power Adapter
- 1× IR Remote
- 1× User Manual
Specifications
| Technical | |
| HDMI Compliance | HDMI 1.4a |
| HDCP Compliance | HDCP 1.4 |
| Video Bandwidth | 2.97Gbps |
| Video Resolution | 4K x 2K@30Hz,1080P@120Hz,and 1080P 3D@60Hz etc. |
| Color Space | RGB/YCbCr 4:2:0, YCbCr 4:4:4, YCbCr 4:2:2 |
| Color Depth | 30bit, 36bit, 48bit per pixel |
| HDMI Audio Formats | DTS-HD/Dolby-true-HD/LPCM 7.1/DTS/Dolby-AC3/DSD |
| ESD Protection | Human-body Model:
±8kV (Air-gap discharge) , ±4kV (Contact discharge) |
| Connections | |
| Inputs | 4×HDMI Type A [19-pin female] 1×IR Receiver Window |
| Outputs | 1×HDMI Type A [19-pin female] |
| Mechanical | |
| Housing | Plastic Enclosure |
| Color | Black |
| Dimensions | 135mm(W)×77.6mm(D)×23.1mm(H) |
| Weight | 120g |
| Power Supply | Input: AC100~240V 50/60Hz
Output: DC5V/1A(US standards，CE/FCC/UL certified) |
| Power Consumption | 1.5W |
| Operating
Temperature |
0°C ~ 40°C / 32°F ~ 104°F |
| Storage Temperature | -20°C ~ 60°C / -4°F ~ 140°F |
| Relative Humidity | 20~90% RH (non-condensing) |
Operation Controls and Functions
Front Panel
| Number | Name | Function description |
| 1 | Power LED | The red LED will illuminate when the product is connected power supply. |
| 2 | AUTO LED | The green LED will illuminate when the AUTO function is turned on. Otherwise, the light is off. |
| 3 | IR | IR receiver window. It receives IR remote signal from this product only. |
| 4 | OUT LED | The green LED will illuminate when the HDMI OUT port is connected to an active display device. |
|
5 |
IN1~IN4 LED |
▪ The LED will illuminate in blue when HDMI IN port is
connected to an active display device and is chosen. ▪ The LED will illuminate in red when HDMI IN port is connected to an active display device but not be chosen. ▪ The LED won’t illuminate when HDMI IN port is not connected display device. Note: The main picture illuminates in blue and others sub-picture illuminate in red or not illuminate in the PIP function. |
| 6 | SW button | Loop chooses the input source, corresponding to the light is on. |
Rear Panel
| Number | Name | Function description |
| 1 | 5V | Connect 5V/1A adapter to AC wall outlet for power supply. |
| 2 | HDMI IN1~IN4 | Connect to HDMI sources devices such as DVD players or PS4 with HDMI cable. |
| 3 | HDMI OUT | Connect to HDMI display device such as a TV or monitor with
HDMI cable. |
IR Remote
- IN1/IN2/IN3/IN4: Choose the input source button.
- AUTO: Turn on/off the AUTO function. (Please see “7. AUTO function instruction ” detail description)
: Loop choose input source between IN1 and IN4- PIP: Turn on/off the PIP function.
- SEL: Choose an input source to the main picture in the PIP function.
- Enter: Press the SEL button will choose an input source to the main picture, and then press the button to confirm this operation in the PIP function.
AUTO function instruction
- The product has a power-off memory function.
- If the AUTO function is turned off and the product is powered off. When the product is powered on again and the AUTO function is also turned off. At this time, the HDMI OUT port will be chosen as the input source before powering off.
- If the AUTO function is turned on and the product is powered off. When the product is powered on again and the AUTO function is also turned on. At this time, the HDMI OUT port will be chosen as the input source before powering off. But the input source before power off has no input signal, the HDMI OUT port will be chosen as the next input source. For example, the HDMI IN2 is the input source before power off and it has no input signal, the HDMI OUT port will be chosen HDMI IN3 port. The order of choosing input source is IN1>>IN2>>IN3>>IN4>>IN1…etc.
Note: All input sources are not connected when the product is powered on again, the HDMI OUT port will be chosen as the input source before
power off and do not jump.
- The product is powered on and the AUTO function is turned off.
If the AUTO function is turned off, there is no effect when you plug in or pull out the input source. You can use the SW button on the front panel or the IR remote to switch the input source. - The product is powered on and the AUTO function is turned on.
- The HDMI OUT port will jump the corresponding input source when the product is connected to an input source. For example, The HDMI OUT port will jump to HDMI IN2 when the product is connected to the HDMI IN2 source.
- When you pull out the input source before you choose, the HDMI OUT port will jump to the next input source. The order of choosing input source is IN1>>IN2>>IN3>>IN4>>IN1…etc. If all input sources are pulled out, the HDMI OUT port does not jump.
- The product is powered on, you turn off the AUTO function and then turn it on.
If you turn off the AUTO function, there is no effect when you plug in or pull out the input source. Then you turn on the AUTO function, the HDMI OUT port will jump according to the order IN1>>IN2>>IN3>>IN4>>IN1…etc. - The product is powered on, you turn on the AUTO function and then turn off.
The AUTO LED will off when the AUTO function is turned off. At this time, the input and output sources are not changed.
Application Example
TROUBLESHOOTING FAQ
Does this product require HDMI line length for the connection to interfere?
- According to the HDMI line length test, 4K×2K@30Hz is the longest line length up to 10m/32.8ft at the HDMI input port and is the longest line length up to 3m/9.8ft at the HDMI output port.
- The use of a “Premium High-Speed HDMI” cable is highly recommended.
- The range of the IR remote is between 0~7m and the angle is plus and minus 45 degrees.
- Scan this QR code using your smartphone to view the full J-Tech Digital Product Lineup!
- Have more questions? Scan this QR code using your smartphone to contact us!
J-Tech Digital®
12803 Park One Drive Sugar Land, TX 77478
- Product pictures are for reference only.
- Specifications, pictures & software described herein are subject to change without prior notification.
- Only use the provided power supply when operating this unit. J-Tech Digital® is not responsible for any damage due to customer neglect.
- All trademarks are the sole property of their respective companies.
- Copyright ©J-Tech Digital, Inc. All rights reserved.
- Website: www.jtechdigital.com
- TollFree: 1-888-610-2818
- Email: support@jtechdigital.com
J-Tech Digital® Ultra HD 4K 4×1 HDMI Switch with PIP & Auto Switch On/Off
Model: JTECH-4KPIP0401
FREQUENTLY ASKED QUESTIONS
What is the J-Tech Digital JTECH-4KPIP0401 HDMI switch with PIP?
The J-Tech Digital JTECH-4KPIP0401 is a 4-port HDMI switch with a Picture-in-Picture (PIP) feature that allows you to connect multiple HDMI sources to a single HDMI display and view them simultaneously.
How many HDMI ports does the JTECH-4KPIP0401 have?
The JTECH-4KPIP0401 has four HDMI input ports, allowing you to connect up to four HDMI sources.
What is the maximum resolution supported by the JTECH-4KPIP0401 HDMI switch?
The HDMI switch supports 4K x 2K resolution, which means it can handle video resolutions up to 3840x2160 pixels.
What is Picture-in-Picture (PIP) on an HDMI switch?
Picture-in-Picture (PIP) is a feature that allows you to display the content from multiple HDMI sources on the same screen simultaneously, with one source as the main display and the others displayed in smaller windows.
How do I switch between HDMI sources with the JTECH-4KPIP0401?
The JTECH-4KPIP0401 likely has a remote control or button on the device itself to switch between connected HDMI sources.
Can I use the PIP feature to watch multiple HDMI sources at the same time?
Yes, you can use the PIP feature to watch multiple HDMI sources simultaneously, but keep in mind that the main source will take up most of the screen, and the others will be displayed in smaller windows.
Does the JTECH-4KPIP0401 support audio as well as video switching?
Most HDMI switches, including the JTECH-4KPIP0401, support both audio and video switching between HDMI sources.
Is the JTECH-4KPIP0401 HDMI switch compatible with older HDMI versions?
The JTECH-4KPIP0401 should be backward compatible with older HDMI versions, but it's essential to check the product specifications to confirm compatibility.
Can I use the JTECH-4KPIP0401 HDMI switch with gaming consoles and other HDMI devices?
Yes, you can connect gaming consoles, Blu-ray players, set-top boxes, and other HDMI devices to the switch and use it to switch between them.
Does the JTECH-4KPIP0401 support HDCP (High-bandwidth Digital Content Protection)?
HDCP is a standard used to protect copyrighted content. The JTECH-4KPIP0401 HDMI switch likely supports HDCP to ensure compatibility with protected content.
Can I control the PIP feature to adjust the size and position of the secondary sources on the screen?
Yes, HDMI switches with PIP often allow you to adjust the size and position of the secondary sources using the remote control or on-screen menus.
Does the JTECH-4KPIP0401 come with its power adapter?
Most HDMI switches come with a power adapter to supply the necessary power to the switch. Check the product packaging to see if a power adapter is included.
Can the JTECH-4KPIP0401 HDMI switch be used with a 1080p display?
Yes, the JTECH-4KPIP0401 should be compatible with 1080p displays, as it supports resolutions up to 4K x 2K.
Is the JTECH-4KPIP0401 HDCP 2.2 compliant?
HDCP 2.2 is a version of HDCP that's required for certain 4K content playback. Refer to the product specifications to see if the switch is HDCP 2.2 compliant.
Can I use the JTECH-4KPIP0401 HDMI switch with a soundbar or AV receiver?
Yes, you can connect the HDMI output of the switch to a soundbar or AV receiver to enhance the audio experience.
VIDEO – PRODUCT OVERVIEW
DOWNLOAD THE PDF LINK: J-Tech Digital JTECH-4KPIP0401 4K x 2K 4-Port HDMI Switch with PIP User Manual4