מָבוֹא
This instruction manual provides essential information for the safe and proper handling, installation, and maintenance of the Bertazzoni 606094 Oven Bake Element. This component is an original equipment manufacturer (OEM) part designed for specific Bertazzoni oven models, including BAF91EG, BAF92EG, and BAF91.1EG. Please read this manual thoroughly before attempting any installation or service.
שמור מדריך זה לעיון עתידי.
המוצר נגמרview
The Bertazzoni 606094 Oven Bake Element is a critical heating component located at the bottom of the oven cavity. Its primary function is to generate heat for baking and roasting, ensuring even temperature distribution within the oven.
This image displays the Bertazzoni 606094 Oven Bake Element. It is a black, U-shaped heating element designed for the bottom of an oven cavity. The element features two electrical terminals at its base for connection to the oven's power supply, and a thin metal support rod running horizontally across its width.
התקנה והתקנה
WARNING: Before attempting any installation or repair, ensure the oven's power supply is completely disconnected at the circuit breaker to prevent electric shock. It is recommended that installation be performed by a qualified technician.
- בטיחות ראשונה: Disconnect the oven from its power source by turning off the circuit breaker or unplugging the appliance.
- גישה לאלמנט: Open the oven door and locate the bake element at the bottom of the oven cavity. Depending on the oven model, you may need to remove oven racks or a bottom panel to access the element.
- נתק חיווט: Carefully pull the element forward slightly to expose the electrical terminals at the back. Note the position of the wires connected to the terminals. It is advisable to take a photograph for reference. Disconnect the wires from the old element.
- הסר אלמנט ישן: Unscrew any mounting screws holding the element in place. Gently slide the old element out of the oven cavity.
- התקנת אלמנט חדש: Carefully insert the new Bertazzoni 606094 bake element into the oven cavity, ensuring it aligns with the mounting holes.
- חבר מחדש את החיווט: Connect the electrical wires to the terminals of the new element, ensuring they are securely attached in their original positions.
- אלמנט מאובטח: Fasten the new element with the mounting screws. Ensure it is firmly in place and does not wobble.
- החזר כוח: סגור את דלת התנור. התקן מחדש את אספקת החשמל לתנור דרך מפסק החשמל.
- פונקציונליות בדיקה: Turn on the oven to a bake setting and observe if the element heats up properly.
פוּנקצִיָה
The Bertazzoni 606094 Oven Bake Element is a passive component that functions as part of the oven's heating system. Once installed and connected to the oven's electrical system, it receives power when the oven is set to a bake or roast function, converting electrical energy into radiant heat. This heat is then distributed throughout the oven cavity to cook food.
תַחזוּקָה
Proper maintenance can extend the lifespan of your oven's components. For the bake element:
- ניקוי: Ensure the oven is cool and disconnected from power before cleaning. Gently wipe the element with a soft, damp cloth to remove any food spills or residue. Avoid using abrasive cleaners, metal scouring pads, or harsh chemicals, as these can damage the element's surface.
- בְּדִיקָה: Periodically inspect the element for any visible signs of damage, such as cracks, blisters, or discoloration. If any damage is observed, the element may need replacement.
- הימנע מהשפעה: Be careful not to strike the element with cookware or other objects, as this can cause damage.
פתרון בעיות
If your oven is not heating correctly after element replacement, consider the following common issues:
- תנור לא מתחמם:
- אין כוח: Check if the oven is properly plugged in and the circuit breaker has not tripped.
- חיווט שגוי: Verify that the electrical wires are securely connected to the element terminals in the correct configuration.
- Faulty Element (Rare for New): Although rare for a new part, inspect the element for any visible defects.
- חימום לא אחיד:
- Element Not Fully Functional: If only parts of the element glow or heat, it may indicate an internal fault.
- רכיבי תנור נוספים: Uneven heating can also be caused by issues with the oven's thermostat or temperature sensor, which are separate from the bake element.
אם שלבי פתרון הבעיות אינם פותרים את הבעיה, מומלץ לפנות לטכנאי תיקון מכשירים מוסמך.
מפרטים
| תכונה | פְּרָט |
|---|---|
| מספר חלק | 606094 (TYUA-EA7927) |
| מספר דגם של פריט | 606094 |
| דגמי תנורים תואמים | BAF91EG, BAF92EG, BAF91.1EG |
| משקל פריט | 1.6 פאונד |
| מידות המוצר | 0.1 x 0.1 x 0.1 אינץ' (Note: These dimensions appear to be placeholder/packaging dimensions and not the actual element size.) |
| רכיבים כלולים | אֵלֵמֶנט |
| יַצרָן | TYGH |
מידע על אחריות
Warranty coverage for the Bertazzoni 606094 Oven Bake Element is typically provided by the seller or the original equipment manufacturer. Please refer to your purchase documentation or contact the seller directly for specific warranty terms and conditions. Keep your proof of purchase for any warranty claims.
תְמִיכָה
For technical assistance, installation questions, or troubleshooting beyond the scope of this manual, please contact the retailer from whom you purchased the element or a certified appliance repair professional. Do not attempt repairs that are beyond your technical capabilities.
