Milesight UG56-868M

מדריך למשתמש של Milesight UG56-868M IoT LoRaWAN Gateway Wi-Fi

Model: UG56-868M

1. המוצר נגמרview

The Milesight UG56-868M is an industrial IoT LoRaWAN gateway designed for robust and reliable data transmission in various applications. It supports Wi-Fi connectivity for flexible deployment and efficient data backhaul. This manual provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your gateway.

Milesight UG56-868M LoRaWAN Gateway

תמונה 1.1: חזית view of the Milesight UG56-868M LoRaWAN Gateway. The device is a compact, rectangular unit with a white and black casing. It features LED indicators for POWER, STATUS, LoRa, Wi-Fi, and ETH, along with the Milesight logo and model number UG56. An antenna is connected to the right side.

2. תכולת החבילה

Please check the package carefully to ensure all items are present and undamaged. If any item is missing or damaged, please contact your vendor.

3. מידע בטיחות

כדי להבטיח פעולה בטוחה ולמנוע נזק, אנא הקפידו על אמצעי הזהירות הבאים:

4. התקנה

4.1 התקנה פיזית

  1. בחר מיקום: Select a central location for the gateway, preferably at a higher elevation, to maximize LoRa signal coverage. Avoid placing it near large metal objects or other electronic devices that may cause interference.
  2. חבר אנטנה: Carefully screw the provided LoRa antenna onto the SMA connector on the side of the gateway. Ensure it is finger-tight.
  3. הרכבה (אופציונלי): If wall-mounting or pole-mounting, use the appropriate mounting kit (sold separately) and follow its instructions.

4.2 חיבור מתח

  1. Connect the power adapter to the DC power input port on the gateway.
  2. Plug the power adapter into a standard electrical outlet. The POWER LED indicator on the front panel should illuminate.

4.3 חיבור רשת

The UG56-868M supports both Ethernet and Wi-Fi for backhaul connectivity.

חיבור Ethernet:

חיבור Wi-Fi:

5. הפעלה

5.1 מחווני LED

The front panel of the UG56-868M features several LED indicators to show the device's status:

5.2 תצורה ראשונית (Web מִמְשָׁק)

After connecting to the gateway's network (via Ethernet or Wi-Fi), you can access its web interface for detailed configuration.

  1. פתח א web browser and enter the gateway's IP address (default: http://192.168.23.150).
  2. Enter the default username and password (refer to the label on the device or the quick start guide for default credentials).
  3. Upon successful login, you will be prompted to change the default password for security reasons. It is highly recommended to do so.
  4. נווט דרך ה web interface to configure network settings (Wi-Fi SSID/password, static IP), LoRaWAN server settings (e.g., Network Server address), and other advanced features.

6. תחזוקה

6.1 עדכוני קושחה

Regularly check the Milesight official website for the latest firmware versions. Firmware updates can provide new features, performance improvements, and security patches.

6.2 ניקוי

Clean the exterior of the gateway with a soft, dry cloth. Do not use liquid cleaners or aerosol sprays.

7. פתרון תקלות

סעיף זה מספק פתרונות לבעיות נפוצות שאתה עשוי להיתקל בהן.

בְּעָיָהסיבה אפשריתפִּתָרוֹן
Gateway not powering on (POWER LED off)אין ספק כוח; מתאם חשמל פגום; חיבור רופף.Check power outlet; ensure power adapter is securely connected to both the gateway and the outlet; try a different power adapter if available.
לא ניתן לגשת web מִמְשָׁקכתובת IP שגויה; בעיית קישוריות לרשת; חומת אש חוסמת גישה.Verify the gateway's IP address; ensure your computer is on the same network segment; temporarily disable firewall; try a different browser.
LoRa devices not connectingIncorrect LoRaWAN server settings; antenna not connected; device out of range; frequency mismatch.Verify LoRaWAN server configuration in the gateway's web interface; ensure antenna is securely attached; check device range and signal strength; confirm frequency plan (868MHz for this model).
Wi-Fi/Ethernet LED offCable disconnected; network configuration error; Wi-Fi disabled.Check Ethernet cable connection; verify Wi-Fi settings in the web interface; ensure Wi-Fi is enabled.

8. מפרטים

תכונהפְּרָט
מותגמיילסייט
מספר דגםUG56-868M
ASINB0DF5QLBN2
תדר LoRa868 MHz (EU868)
קישוריותWi-Fi, Ethernet
צֶבַעשָׁחוֹר
משקל פריט8.36 פאונד (כ-3.79 ק"ג)
מידות חבילה3.94 x 0.79 x 0.39 אינץ' (בערך 10 x 2 x 1 ס"מ)
יַצרָןמיילסייט
תאריך ראשון זמין25 באוגוסט 2024

9. אחריות ותמיכה

Milesight products are typically covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Milesight webאֲתַר.

For technical support, firmware downloads, or further assistance, please contact Milesight customer support or visit their official support portal:

מסמכים קשורים - UG56-868M

מִרֹאשׁview מדריך למשתמש של Milesight UG56 Industrial LoRaWAN Gateway
מדריך מקיף למשתמש עבור שער LoRaWAN תעשייתי Milesight UG56, המפרט את התכונות, המפרטים, התצורה ויישום שלו.ampאפשרויות לפריסת IoT.
מִרֹאשׁview Milesight UG65 Semi-industrial LoRaWAN Gateway User Guide
Comprehensive user guide for the Milesight UG65 Semi-industrial LoRaWAN Gateway, covering setup, configuration, specifications, and application examples for robust IoT connectivity.
מִרֹאשׁview מדריך התחלה מהירה לשער LoRaWAN חיצוני של Milesight UG67
מדריך תמציתי להתקנה וקביעת תצורה של שער LoRaWAN חיצוני Milesight UG67, המכסה הגדרת חומרה, חיבור רשת וקביעת תצורה בסיסית.
מִרֹאשׁview מדריך למשתמש של Milesight WS558 Smart Light Controller
מדריך למשתמש לבקר התאורה החכם Milesight WS558 LoRaWAN®, המפרט את התכונות, החומרה, ההפעלה, הגדרות LoRaWAN ו-D2D, תחזוקה, התקנה, מטען המכשיר, נתוני החיישנים ופקודות downlink.
מִרֹאשׁview Milesight WS303 Mini-Leckageerkennungssensor Benutzerhandbuch
Umfassendes Benutzerhandbuch für den Milesight WS303 Mini-Leckageerkennungssensor mit LoRaWAN®. Erfahren Sie mehr über Installation, Konfiguration und Wartung dieses IoT-Sensors für intelligente Gebäude.
מִרֹאשׁview Milesight UC51x LoRaWAN Solenoid Valve Controller User Manual
Comprehensive user manual for the Milesight UC51x series LoRaWAN Solenoid Valve Controller, covering hardware introduction, configuration via ToolBox (NFC/USB), LoRaWAN settings, installation, Milesight IoT Cloud management, and maintenance.