BRESSER Beaufort 5-in-1 Wireless Weather Station Meteorological Center User Manual

1. המוצר נגמרview

The BRESSER Beaufort 5-in-1 Wireless Weather Station Meteorological Center provides comprehensive weather data directly to your home. It includes an indoor display unit and a multi-sensor outdoor unit that measures temperature, humidity, wind speed, wind direction, and rainfall.

Image: The main display unit of the BRESSER Beaufort 5-in-1 Wireless Weather Station, showing indoor and outdoor temperature, humidity, wind data, forecast, barometric pressure, and time.

2. התקנה

2.1 פירוק ובדיקת רכיבים

פרקו בזהירות את כל הרכיבים וודאו שהפריטים הבאים נמצאים:

• יחידת תצוגה ראשית
• 5-in-1 Outdoor Multi-Sensor Unit
• Mounting accessories (pole, base, screws)
• Power adapter for main unit
• מדריך הוראות

2.2 התקנת סוללה

יחידת תצוגה ראשית: Insert 1x CR2032 battery (not included) into the battery compartment for backup power. Connect the main unit to a power outlet using the provided adapter.

יחידת חיישנים מרובת-חיישנים חיצונית: Insert 3x AA batteries (not included) into the battery compartment of the outdoor sensor. Ensure correct polarity.

2.3 Outdoor Sensor Placement and Mounting

מיקום נכון של חיישן החוץ הוא קריטי לקריאות מדויקות.

• Mount the sensor in an open area, away from obstructions like buildings or trees, to ensure accurate wind and rain measurements.
• Ensure the sensor is mounted level to guarantee accurate rainfall collection and wind direction.
• Orient the wind vane (the arrow) to point North during installation.
• Use the provided mounting pole and base to secure the sensor to a stable surface or pole.

תמונה: צד view of the BRESSER 5-in-1 outdoor multi-sensor unit, showing the wind cups, wind vane, and rain collector.

2.4 סנכרון ראשוני

After installing batteries in both units, place them within close proximity. The main display unit will automatically search for and connect to the outdoor sensor. This process may take a few minutes. Once connected, outdoor data will appear on the display.

2.5 הגדרת זמן ותאריך

The weather station may attempt to synchronize time via RCC (Radio Controlled Clock) signal. If an RCC signal is not available in your region, or if you prefer, you can manually set the time and date using the buttons on the main display unit. Refer to the specific button functions in the Operating section for detailed instructions.

3. הפעלת תחנת מזג האוויר

3.1 תצוגה נגמרתview

The main display unit presents various weather parameters:

• הַחוּצָה: טמפרטורה ולחות בחוץ.
• IN: טמפרטורה ולחות בתוך הבית.
• רוּחַ: Current wind speed and direction, including gust speed.
• תַחֲזִית: Weather forecast icons (sunny, cloudy, rainy, etc.).
• BARO: קריאות לחץ ברומטריות.
• RAINFALL: הצטברות גשמים יומית, שבועית או חודשית.
• זמן תאריך: השעה, התאריך והיום בשבוע הנוכחיים.
• BEAUFORT: Beaufort scale indicator for wind force.
• צינת רוח: Calculated wind chill temperature.

תמונה: חזית view of the BRESSER Beaufort 5-in-1 Wireless Weather Station display, highlighting the various data fields and their arrangement.

3.2 פונקציות כפתורים

The display unit features several buttons for navigation and settings:

• הִיסטוֹרִיָה: View historical data for various parameters.
• מקסימום מינימום: Display maximum and minimum recorded values for temperature, humidity, etc. Press again to clear.
• אוֹר: Adjust backlight brightness or activate temporary backlight.
• מצב/סט: Enter settings mode or confirm selections.
• חצים למעלה/למטה: ניווט בין תפריטים או התאמת ערכים.

3.3 הגדרת אזעקות

You can set alarms for specific weather conditions, such as high/low temperature, high wind speed, or heavy rainfall. Enter the alarm setting mode using the MODE/SET button and follow the on-screen prompts to configure your desired alarm thresholds.

3.4 בחירת יחידות

To change units (e.g., Celsius to Fahrenheit, mph to km/h, inHg to hPa), access the settings menu. Navigate to the unit selection option and choose your preferred measurement units.

4. תחזוקה

4.1 החלפת סוללה

Replace batteries in the outdoor sensor when the low battery indicator appears on the main display. Due to the outdoor placement, ensure safe access for battery replacement. The main unit's backup battery should be replaced periodically, typically every 1-2 years.

4.2 ניקוי

Periodically clean the outdoor sensor unit to ensure accurate readings. Remove any debris from the rain collector, wind cups, and wind vane. Use a soft, damp cloth for cleaning; avoid abrasive cleaners or solvents. Clean the display unit with a soft, dry cloth.

4.3 טיפול כללי

Ensure the outdoor sensor is securely mounted and free from physical damage. Protect the main display unit from extreme temperatures, direct sunlight, and moisture.

5. פתרון תקלות

• אין תצוגה ביחידה הראשית: Check power adapter connection and backup battery.
• אין נתונים חיצוניים: Ensure outdoor sensor batteries are fresh and correctly installed. Verify both units are within range and attempt re-synchronization (refer to setup instructions). Check for obstructions between units.
• קריאות לא מדויקות: Ensure the outdoor sensor is mounted correctly (level, clear of obstructions, wind vane pointing North). Clean sensors if necessary.
• שעה/תאריך שגויים: If RCC synchronization fails, manually set the time and date.

6. מפרטים

7. אחריות ותמיכה

For warranty information, please refer to the documentation included with your product packaging or visit the official BRESSER website. For technical support or assistance, please contact BRESSER customer service directly through their official channels.