Ohlins HO919

מדריך הוראות להפעלה עבור בולם זעזועים אחורי לקטנוע Ohlins STX36 HO919

Model: HO919 | Brand: Ohlins

1. הקדמה

This manual provides essential information for the installation, operation, and maintenance of your Ohlins STX36 Scooter Rear Shock, model HO919. This high-performance shock absorber is designed to enhance the ride quality and handling of your 2019 Honda Z125M. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. מידע בטיחות

אַזהָרָה: Installation and service of shock absorbers should only be performed by qualified personnel with appropriate tools and experience. Improper installation or adjustment can lead to serious injury or damage to the vehicle.

  • ללבוש תמיד ציוד מגן אישי מתאים (PPE) במהלך ההתקנה והתחזוקה.
  • Ensure the vehicle is securely supported before beginning any work.
  • Never attempt to disassemble the shock absorber. It contains high-pressure gas and oil, which can cause injury if released improperly.
  • עיין במדריך השירות של הרכב שלך לקבלת מפרט ונהלים ספציפיים של מומנט.
  • After installation, always perform a functional check of the suspension and brakes before riding.

3. המוצר נגמרview

The Ohlins STX36 Scooter Rear Shock (HO919) is a high-quality, adjustable mono-tube shock absorber. It features a 36mm piston diameter, designed for optimal performance and durability. Key components include the spring, spring preload adjuster, and damping adjusters (if equipped).

Two Ohlins STX36 Scooter Rear Shocks, yellow springs, silver bodies

Image: Two Ohlins STX36 Scooter Rear Shocks, featuring bright yellow springs and silver-colored bodies, designed for rear suspension applications. The shocks are shown side-by-side, highlighting their robust construction and adjustable components.

4. התקנה והתקנה

פֶּתֶק: Professional installation is highly recommended for this product.

  1. הֲכָנָה: Secure the motorcycle on a stand, ensuring the rear wheel is off the ground. Remove any bodywork necessary to access the original rear shock absorber.
  2. Removal of Original Shock: Carefully unbolt the original shock absorber from its upper and lower mounting points. Retain all original hardware unless new hardware is provided.
  3. Installation of Ohlins Shock: Position the new Ohlins STX36 shock absorber. Install the upper and lower mounting bolts, ensuring they are correctly aligned. Do not fully tighten bolts at this stage.
  4. מפרטי מומנט: Refer to your Honda Z125M service manual for the correct torque specifications for the shock mounting bolts. Tighten all bolts to the specified values.
  5. בדיקת סיווג: Before reassembling bodywork, check for adequate clearance between the shock absorber and all surrounding components throughout the full range of suspension travel.
  6. אסיפה סופית: Reinstall any removed bodywork.

5. הפעלה וכיוונון

The STX36 shock absorber offers adjustability to fine-tune your scooter's handling characteristics. Always make adjustments in small increments and test the changes in a safe environment.

  • טעינת קפיץ מראש: Adjusting the spring preload changes the initial compression of the spring, affecting ride height and sag. Use the provided tool to turn the preload adjusters. Increase preload for a firmer ride or to compensate for heavier loads.
  • ריבאונד Damping (if equipped): ריבאונד דamping controls the speed at which the shock extends after compression. Adjustments are typically made via a clicker knob at the bottom of the shock. Turn clockwise for slower rebound, counter-clockwise for faster rebound.
  • דחיסה Damping (if equipped): דחיסה דamping controls the speed at which the shock compresses. Adjustments are typically made via a clicker knob on the reservoir or body. Turn clockwise for firmer compression, counter-clockwise for softer compression.

Consult an Ohlins authorized service center or a suspension specialist for personalized setup advice.

6. תחזוקה

Regular maintenance ensures the longevity and optimal performance of your Ohlins STX36 rear shock.

  • ניקוי: שמור על בולם הזעזועים נקי מלכלוך, אבק וזוהמה מהכביש. השתמש בסבון עדין ומים, ולאחר מכן שטוף היטב. הימנע משימוש במכונות שטיפה בלחץ גבוה ישירות על האטמים.
  • בְּדִיקָה: Periodically inspect the shock for any signs of oil leaks, damage to the shaft, spring, or mounting points. Check for loose bolts.
  • מרווחי שירות: Ohlins recommends regular service by an authorized service center. Service intervals depend on usage, but typically every 1-2 years or after significant mileage.
  • אִחסוּן: If storing the vehicle for an extended period, ensure the shock is clean and stored in a dry environment.

7. פתרון תקלות

This section addresses common issues you might encounter with your rear shock absorber.

בְּעָיָהסיבה אפשריתפִּתָרוֹן
נוחות נסיעה ירודה / נסיעה קשהExcessive spring preload, too much compression dampקצב קפיץ שגוי.Reduce spring preload, reduce compression damping, consult a specialist for spring rate.
ירידה מוגזמת בתחתיתעומס קפיץ לא מספיק, דחיסה נמוכה מדיampקצב קפיץ שגוי.הגדלת עומס קפיץ, הגדלת דחיסהamping, consult a specialist for spring rate.
Rear end feels loose / UnstableToo fast rebound damping, insufficient compression damping.הגדל ריבאונד דamping (slower), increase compression damping (firmer).
דליפת שמןאטמים פגומים, כשל ברכיבים פנימיים.Contact an authorized Ohlins service center for inspection and repair. Do not attempt to repair yourself.

If you experience issues not listed here or if the suggested solutions do not resolve the problem, contact an authorized Ohlins service center.

8. מפרטים

מותגאולינס
דֶגֶםHO919 (STX36)
מספר חלק של היצרןHO919
משקל פריט8.38 פאונד
מידות המוצר23.3 x 9.3 x 7.3 אינץ'
מיקום חלק אוטומטיאֲחוֹרִי
סוג שירות הרכבMotorcycle (Honda Z125M)
גימור חיצוניצָבוּעַ

9. אחריות ותמיכה

Ohlins products are manufactured to high standards and come with a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the official Ohlins website or contact your authorized Ohlins dealer.

For technical support, service, or spare parts, please contact an authorized Ohlins service center or visit the official Ohlins website for dealer locator information. Always provide your product model (HO919) and purchase details when seeking support.

אוהלינס הרשמי Webאֲתַר: www.ohlins.com

מסמכים קשורים - HO919

מִרֹאשׁview הוראות הרכבה של בולם זעזועים Öhlins HO 651 עבור Honda XL750 Transalp
הוראות הרכבה מפורטות ונתוני התקנה עבור בולם הזעזועים האחורי Öhlins HO 651, המיועד להונדה XL750 Transalp. כולל תכולת הערכה, שלבי התקנה ומידע על כוונון.
מִרֹאשׁview בולם זעזועים Öhlins HO 450 להונדה CB/CBR650R: הוראות הרכבה
הוראות הרכבה מפורטות לבולם הזעזועים Öhlins HO 450, המיועד לאופנועי Honda CB/CBR650R. כולל תכולת הערכה, אזהרות, מדריך התקנה שלב אחר שלב ונתוני התקנה.
מִרֹאשׁview הוראות הרכבה של בולם זעזועים Öhlins HO 213 עבור Honda CRF300L/Rally
הוראות הרכבה מקיפות לבולם הזעזועים Öhlins HO 213, המיועד לאופנועי Honda CRF300L ו-CRF300Rally. כולל תכולת הערכה, שלבי פירוק, נהלי התקנה ונתוני הגדרה.
מִרֹאשׁview הוראות הרכבה של בולם זעזועים Öhlins HO 734 עבור Honda X-ADV
הוראות הרכבה מפורטות ונתוני התקנה עבור בולם הזעזועים Öhlins HO 734 המיועד לאופנוע Honda X-ADV. כולל תכולת הערכה, שלבי התקנה ומידע על כוונון.
מִרֹאשׁview הוראות הרכבה של בולם זעזועים Öhlins BM 493 עבור BMW R nine T
הוראות הרכבה מפורטות ונתוני התקנה עבור בולם הזעזועים האחורי Öhlins BM 493, המיועד לאופנוע BMW R nine T. כולל תכולת הערכה, אזהרות ומידע על כוונון.
מִרֹאשׁview ערכת בולם זעזועים Öhlins HOS MI20 להונדה S2000 (AP1, AP2) - הוראות הרכבה וכיוונון
Detailed mounting and adjustment instructions for the Öhlins HOS MI20 front and rear shock absorber kits designed for the Honda S2000 (AP1, AP2). Includes kit contents, step-by-step installation procedures, and setup data for rebound and spring preload.