1. הקדמה
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Cisco CP-DX80-VESA VESA Adapter and Wall Mount. Please read this manual thoroughly before installation to ensure correct setup and to prevent damage to the product or connected devices. Retain this manual for future reference.
2. מידע בטיחות
יש להקפיד על אמצעי הזהירות הבאים במהלך ההתקנה והשימוש:
- אַזהָרָה: Improper installation can result in serious personal injury or damage to equipment. Ensure all mounting hardware is securely fastened.
- זְהִירוּת: Do not exceed the weight capacity specified for this mount. Refer to the specifications section for details.
- Ensure the wall structure can safely support the combined weight of the mount and the attached device.
- Use appropriate tools and follow all steps carefully. If unsure, consult a qualified installer.
- הרחק חלקים קטנים מילדים.
3. תכולת החבילה
ודא שכל הרכיבים קיימים לפני תחילת ההתקנה:
- Cisco CP-DX80-VESA VESA Adapter
- תושבת לקיר
- ערכת חומרת הרכבה (ברגים, עוגנים, דיסקיות)
- מדריך הוראות
Image: The Cisco CP-DX80-VESA VESA Adapter and Wall Mount. This image displays the primary components of the product, including the adapter plate and the wall mounting bracket, designed to secure a video conferencing system to a wall.
4. התקנה והתקנה
4.1 כלים נדרשים
- לִקְדוֹחַ
- Drill bits (appropriate for wall material)
- מברג ראש פיליפס
- רָמָה
- עִפָּרוֹן
- Stud finder (recommended for drywall installation)
4.2 התקנה על קיר
- תבחר מיקום: Choose a suitable wall location, ensuring it can support the weight of the mount and the device. Avoid areas with electrical wires or plumbing.
- סמן חורים לקדוח: Hold the wall mount bracket against the wall at the desired height. Use a level to ensure it is straight. Mark the drill hole locations with a pencil.
- חורים לקדוח: Drill pilot holes at the marked locations. Use appropriate drill bits for your wall type (e.g., wood studs, concrete, drywall with anchors).
- סוגר מאובטח: Insert wall anchors (if required) into the pilot holes. Align the wall mount bracket with the holes and secure it to the wall using the provided screws. Ensure it is firmly attached.
4.3 VESA Adapter Attachment to Device
- זיהוי תבנית VESA: Locate the VESA mounting holes on the back of your Cisco DX80 video conferencing system.
- חבר מתאם: Align the Cisco CP-DX80-VESA adapter with the VESA mounting holes on the DX80 device.
- מתאם מאובטח: Use the appropriate screws from the mounting hardware kit to securely fasten the VESA adapter to the DX80 device. Do not overtighten.
4.4 Mounting the Device to the Wall Bracket
- Lift Device: Carefully lift the DX80 device with the attached VESA adapter. It is recommended to have assistance for this step.
- Engage Mount: Hook the VESA adapter onto the wall mount bracket. Ensure the adapter is fully seated and engaged with the bracket's locking mechanism.
- מכשיר מאובטח: Depending on the design, there may be additional screws or clips to secure the device to the wall bracket. Fasten these as instructed to prevent accidental dislodging.
- בדיקה סופית: Gently pull on the mounted device to ensure it is stable and securely attached to the wall.
5. שיקולים תפעוליים
Once the Cisco DX80 is securely mounted using the CP-DX80-VESA adapter and wall mount, its operation remains consistent with its standard functionality. The mount provides a stable platform for the device.
- Ensure all cables (power, network, video) are properly connected and routed to avoid strain or interference.
- Periodically check the stability of the mount and the device, especially after any adjustments or movement.
6. תחזוקה
The Cisco CP-DX80-VESA VESA Adapter and Wall Mount requires minimal maintenance.
- ניקוי: נגבו את משטחי התושבת בעזרת מטלית רכה ויבשה. הימנעו מחומרי ניקוי שוחקים או ממסים שעלולים לפגוע בגימור.
- בְּדִיקָה: Periodically inspect all mounting screws and connections to ensure they remain tight. Over time, vibrations or environmental factors can cause screws to loosen.
- נֵזֶק: If any part of the mount appears damaged or worn, discontinue use and contact Cisco support for replacement parts or advice.
7. פתרון תקלות
This section addresses common issues related to the installation and stability of the mount.
| בְּעָיָה | סיבה אפשרית | פִּתָרוֹן |
|---|---|---|
| ההר מרגיש לא יציב או מתנדנד. | Loose mounting screws; inadequate wall support; incorrect anchors. | Tighten all screws. Verify wall structure and use appropriate anchors. Reinstall if necessary. |
| Device not attaching correctly to VESA adapter. | Incorrect screw size; misalignment. | Ensure correct VESA screws are used. Realign the adapter with the device's mounting holes. |
| Wall mount bracket not level. | שגיאת התקנה. | Remove bracket, re-mark holes using a level, and reinstall. |
8. מפרטים
Key technical specifications for the Cisco CP-DX80-VESA VESA Adapter and Wall Mount:
| תכונה | פְּרָט |
|---|---|
| מספר דגם | CP-DX80-VESA |
| מידות המוצר | 10.63 x 16.14 x 3.54 אינץ' |
| משקל פריט | 2.2 פאונד |
| ממשק חומרה | Ethernet (for connected device) |
| יַצרָן | סיסקו מערכות בע"מ |
| תאריך ראשון זמין | 21 באוגוסט 2015 |
| UPC | 882658710469 |
9. אחריות ותמיכה
For information regarding the product warranty, please refer to the official Cisco warranty documentation provided with your original purchase or visit the Cisco webאתר. תנאי האחריות הספציפיים עשויים להשתנות בהתאם לאזור ולמוצר.
9.1 תמיכה טכנית
If you encounter issues that cannot be resolved using the troubleshooting guide, or require further assistance, please contact Cisco Technical Support:
- Webאֲתַר: בקרו באתר התמיכה הרשמי של סיסקו website for documentation, FAQs, and contact options.
- טֵלֵפוֹן: Refer to your product's packaging or the Cisco webאתר למספרי טלפון של תמיכה אזורית.
When contacting support, please have your product model number (CP-DX80-VESA) and purchase information readily available.
