H.264-1080P Remote Wireless Camera

Thank you for choosing this product. This camera adopts a unique ultra-portable design, enabling its application in various fields and bringing you convenient, safe, and colorful daily life. Please follow the instructions to set up your camera correctly.

Powering On/Off and Reset

1. Press the ON/OFF key to turn on the camera. Press the ON/OFF key for 3 seconds to turn it off.
2. When the camera is on, you may press the Reset key for 5 seconds to restart the camera for factory settings.

Mode Indicator Lights

Red light: Power indicator (always on when power is on).

Blue light: WiFi indicator.

Specific Modes:

• Point-to-point mode: Blue light flashes slowly.
• Configuration of remote camera completed: Blue light is always on.

If you are unsure of the mode, reset the camera and switch to point-to-point mode. This reset works only when the blue light is always on or flashes slowly. Press the Reset key for about 5 seconds until the indicators go out, then release. The camera will start in about 30 seconds.

II. Download APP Software

Method 1: Scan the QR code (Figure 1) to enter the download page (Figure 2). Choose to download the software according to your mobile phone's system. Download and install the computer client through the address: http://lookcam.ffvv.xyz:8800/lookcam_download.html

Method 2: For Android, search for the APP software called LOOKCAM on Google Play and download/install it. For Apple, search for LOOKCAM in the App Store and download/install it.

Note: If you scan with WeChat, when Figure 2 appears, click the browser in the upper right corner to open and download the software.

After downloading and installing, the LOOKCAM icon will appear on your mobile phone.

III. Point-to-point connection of mobile phone to camera

Enter your mobile phone's Wi-Fi settings. Find the WiFi account (UID) and connect.

After the device's UID is connected, open the phone APP (LOOKCAM).

Click 'Cancel' for point-to-point short-range viewing (point-to-point connection and viewing are allowed). Click 'Yes' to fast pair the router and enter remote viewing. If you need to set up remote viewing, please continue to read the instructions.

IV. Set up the camera remote

When point-to-point video can be viewed, return to the previous level and enter the interface.

Click the setup icon ⚙️ → Advanced Configuration → WiFi Connection Configuration → Find WiFi → Enter Password → Click OK. The camera will restart automatically (wait about 40 seconds). The camera will change from offline to online, allowing remote viewing.

App Interface Controls:

• Brightness Adjustment ☀️
• Adjusting Contrast ?
• Night Vision ON/OFF ?
• LED Light ON/OFF ?
• Resolution Rate ⬆️
• Video Record ▶️
• Snapshot ?
• Microphone ON/OFF ?
• Speaker ON/OFF ?

Note: When connecting to remote, ensure you enter the correct WiFi password. Otherwise, the camera will restart after clicking OK. If the password is wrong, the camera will not be online, and you will need to reset and re-pair it.

Specifications and Parameters

V. Troubleshooting

Micro SD Card for Recording: The camera supports up to 128 GB Micro SD cards. Please use a High Speed Class 10 FAT formatted memory card. You must format the Micro SD card before use. If the SD card is not recognized when inserted, remove and re-insert it.

Why can't the camera go online?

1. Powerless.
2. Check if your router is working properly.
3. Weak Wi-Fi signal.
4. Wrong password during Wi-Fi setting.

Why is remote monitoring not smooth?

Choose a suitable resolution to watch according to your internet speed.

Why can't I save to my SD card?

The SD Card must be formatted if this is your first time to use it.

How do I reset if I forgot my password?

Press the reset key for 10 seconds to restore the factory setting.

Security Note:

The initial password for each camera is 123456. Please change the password to ensure the security of your camera.

Connection Issues:

If the camera cannot be connected to the router, please reset and connect the hotspots before completing the configuration.