Manuale utente display SAMEBIKE 20LVXD30

Introduzione

This manual provides essential instructions for the proper installation, operation, and maintenance of your SAMEBIKE 20LVXD30 Display. Please read this manual thoroughly before using the display to ensure safe and efficient operation. Retain this manual for future reference.

Informazioni sulla sicurezza

Always prioritize safety when operating your electric bicycle. The display is an integral part of your e-bike's control system. Adhere to the following safety guidelines:

• Utilizzo del casco: Always wear a certified helmet when riding your electric bicycle.
• Read Bicycle Manual: This display manual complements your electric bicycle's main owner's manual. Always read and understand the complete bicycle manual for critical safety information before riding.
• Normative locali: Be aware of and comply with all local traffic laws and regulations regarding electric bicycle use.
• Condizioni ambientali: Avoid exposing the display to extreme temperatures, heavy rain, or direct sunlight for prolonged periods.
• Installazione professionale: If you are unsure about any installation or connection steps, consult a qualified bicycle technician.

Impostare

The SAMEBIKE 20LVXD30 Display is designed for straightforward installation on compatible electric bicycles.

1. Montaggio: Securely attach the display bracket to the center of your bicycle's handlebar. Ensure it is positioned for optimal visibility and accessibility while riding.
2. Connessione via cavo: Carefully connect the display's cable to the corresponding port on your electric bicycle's wiring harness. Ensure the connection is firm and properly seated to prevent accidental disconnection or water ingress.
3. Gestione dei cavi: Route the display cable neatly along the handlebar and frame, securing it with cable ties to prevent interference with steering or other components.
4. Accensione iniziale: After installation, power on your electric bicycle. The display should illuminate and show initial readings.

Utilizzo del display

The 20LVXD30 Display provides real-time information and control over your electric bicycle's functions.

Mostra sopraview

The main screen provides a clear overview of key riding data:

• Livello della batteria: Indicato da un'icona della batteria e dalla percentualetage (ad esempio, 90%).
• Current Power Output: Shows the instantaneous power being used (e.g., 682 W).
• Velocità attuale: Displays your current riding speed (e.g., 25.5 km/h).
• Distanza del viaggio: Shows the distance covered during the current ride (e.g., 20.5 km/h, likely indicating trip distance in km).
• Livello PAS: Indicates the current Pedal Assist System level (e.g., 1). This controls the amount of motor assistance.
• Tempo: Visualizza l'ora corrente (ad esempio, 19:45).

Funzioni di base

• Accensione/spegnimento: Typically, a long press on a designated button (not visible in image, but standard) will power the display on or off.
• Adjusting PAS Level: Use the '+' and '-' buttons (if present, common design) to cycle through the Pedal Assist System levels. Higher levels provide more motor assistance.
• Modifica delle modalità di visualizzazione: Short presses on a mode button (if present) may cycle through different information displays, such as Odometer, Max Speed, Average Speed, etc.

Impostazioni

Accessing the settings menu usually involves a specific button combination or a long press on a mode button. Within the settings, you may be able to:

• Imposta ora e data.
• Change units (e.g., km/h to mph).
• Reset trip data.
• Regola la luminosità della retroilluminazione.
• Configure wheel size (if not automatically detected by the e-bike system).

Refer to your electric bicycle's main manual for detailed instructions on accessing and adjusting specific display settings, as these can vary.

Manutenzione

Proper maintenance ensures the longevity and optimal performance of your SAMEBIKE 20LVXD30 Display.

• Pulizia: Utilizzare un morbido, damp cloth to gently wipe the display screen and casing. Avoid abrasive cleaners, solvents, or direct water spray, which can damage the electronics.
• Protezione: While the display is designed to be weather-resistant, avoid prolonged exposure to heavy rain or direct water submersion. Consider using a protective cover when parking outdoors for extended periods.
• Ispezione dei cavi: Periodically check all cables and connections for signs of wear, fraying, or loose connections. Ensure they are securely fastened.
• Prevenzione dell'impatto: Protect the display from physical impacts, which can cause internal damage or screen cracks.

Risoluzione dei problemi

If you encounter issues with your 20LVXD30 Display, try the following troubleshooting steps:

• Il display non si accende:
  • Ensure the electric bicycle's main power is on.
  • Check all cable connections to the display and the main wiring harness for looseness.
  • Verify the e-bike battery has sufficient charge.
• Letture errate di velocità/distanza:
  • Check the speed sensor and magnet on your bicycle wheel for proper alignment and cleanliness.
  • Ensure the wheel size setting in the display's menu (if adjustable) matches your bicycle's wheel size.
• PAS Not Functioning:
  • Verify the PAS level is set above 0 on the display.
  • Check the pedal sensor for any obstructions or damage.
• Codici di errore: If an error code appears on the display, consult your electric bicycle's main manual or contact SAMEBIKE customer support with the specific code for assistance.

Specifiche

Garanzia e supporto

The SAMEBIKE 20LVXD30 Display comes with a Garanzia di 12 mesi dalla data di acquisto, coprendo i difetti di fabbricazione. La presente garanzia non copre danni causati da uso improprio, incidenti, modifiche non autorizzate o normale usura.

For technical support, warranty claims, or further assistance, please contact SAMEBIKE customer service through their official website or your point of purchase. Please have your product model and purchase information ready when contacting support.