monTEK Dual Monitor Arm Instruction Manual

1. Prodotto finitoview

The monTEK Dual Monitor Arm is designed to enhance your workspace ergonomics and efficiency. This heavy-duty gas spring monitor arm supports two monitors, offering extensive adjustability for optimal viewing comfort. It is compatible with a wide range of screen sizes and weights, providing a stable and flexible mounting solution.

Figure 1: monTEK Dual Monitor Arm supporting two displays.

2. Caratteristiche principali e compatibilità

• Compatibilità universale: Supports 17" to 57" flat and curved screens.
• Capacità di peso: 4.4 lbs to 59.4 lbs per monitor.
• Compatibilità VESA: 75x75 mm e 100x100 mm.
• Regolazione flessibile: Tilt (-75° to +75°), Swivel (±90°), and 180° Screen Rotation.
• Extended Pole: 19.2" height adjustment for versatile setups.
• Heavy-Duty Gas Spring: Tested for over 20,000 cycles for long-lasting, stable performance.
• Gestione cavi integrata: Keeps cables organized for a clean workspace.
• Opzioni di montaggio: Cclamp and Grommet for various desk types.

Figure 2: Compatibility details for screen size, weight, and VESA standards.

Figure 3: Extended pole for height adjustment and monitor configuration options.

Figure 4: Heavy-duty gas spring mechanism for smooth adjustments.

Figure 5: Flexible adjustment ranges for optimal viewangoli di inclinazione.

3. Informazioni sulla sicurezza

• Ensure your desk is sturdy enough to support the weight of the monitor arm and monitors.
• Do not adjust gas spring tension before monitor installation.
• Always follow the installation steps carefully to prevent injury or damage to equipment.
• Tenere lontani bambini e animali domestici durante l'installazione.
• Do not exceed the maximum weight capacity of 59.4 lbs per monitor.

4. Configurazione e installazione

4.1 Opzioni di montaggio

The monTEK Dual Monitor Arm offers two installation methods: C-clamp and Grommet mount. Choose the method suitable for your desk.

• C-Clamp Installazione: Suitable for desk thickness between 0.47" and 1.8".
• Installazione passacavo: Suitable for desk thickness between 0.47" and 2.0". Requires an existing hole or drilling a new one.

Figura 6: C-clamp e opzioni di montaggio tramite passacavo.

4.2 Attaching Monitors

The monitor arm features a quick-release VESA plate for easy monitor attachment. Ensure your monitors have VESA holes (75x75mm or 100x100mm). If your monitor has a circular or non-standard VESA pattern, an additional VESA adapter may be required (not included).

Video 1: Detailed installation guide for the monTEK Dual Monitor Arm, demonstrating step-by-step assembly and monitor attachment.

4.3 Gestione dei cavi

Route your cables through the integrated cable clips along the arm to maintain a tidy and organized workspace. The base also includes a tool slot for convenience.

Video 2: Oltreview of the monTEK Dual Monitor Arm, showcasing its features including cable management.

5. Funzionamento e regolazioni

5.1 Regolazione della tensione della molla a gas

The gas spring tension must be adjusted to match the weight of your monitors for smooth and stable positioning. Use the provided Allen key for adjustment.

• Importante: Do not adjust tension before screen installation.
• Keep the arm horizontal before adjusting the tension.
• If the arm drops, turn the adjustment screw in the '+' direction until the display holds its position horizontally.
• If the arm rises, turn the adjustment screw in the '-' direction until it remains in a horizontal position.

Video 3: Instructions on how to adjust the gas spring tension for optimal monitor support.

5.2 Screen Adjustment Tips

Once installed and tension is adjusted, you can freely tilt, swivel, and rotate your monitors to achieve your desired viewing angles. The extended pole allows for significant height adjustments, supporting both side-by-side and vertical stacking configurations.

Video 4: Tips for adjusting screen positions and angles on the monitor arm.

6. Manutenzione

• Controllare regolarmente tutte le viti e i collegamenti per assicurarsi che siano ben serrati e sicuri.
• Clean the monitor arm with a soft, dry cloth. Avoid abrasive cleaners.
• Non lubrificare il meccanismo della molla a gas, salvo diversa indicazione del produttore.

7. Risoluzione Dei Problemi

• Monitor sags or rises too easily: Adjust the gas spring tension as described in Section 5.1.
• Monitor does not hold position: Ensure all pivot points are tightened appropriately. Re-check gas spring tension.
• Arm is unstable: Verificare che il C-clamp or grommet mount is securely fastened to the desk. Ensure the desk surface is stable.
• I cavi sono disordinati: Utilize the integrated cable management clips to route and secure cables.

8. Specifiche

9. Garanzia e supporto

For warranty information and customer support, please refer to the product packaging or contact monTEK customer service directly. Keep your purchase receipt for any warranty claims.

Visit the official monTEK store for additional products and support: monTEK Store