LEDVANCE 4099854309502

LEDVANCE 17W 2400LM IP65 LED Spotlight with Motion and Light Sensor User Manual

Modello: 4099854309502

1. Introduzione

Thank you for choosing the LEDVANCE 17W 2400LM IP65 LED Spotlight with Motion and Light Sensor. This manual provides essential information for the safe installation, operation, and maintenance of your new LED spotlight. Please read these instructions carefully before installation and retain them for future reference.

2. Informazioni sulla sicurezza

  • Sicurezza elettrica: L'installazione deve essere eseguita da un elettricista qualificato in conformità con tutte le normative elettriche locali e nazionali. Assicurarsi che l'alimentazione sia scollegata prima di procedere all'installazione, alla manutenzione o alla riparazione.
  • Voltage: Questo prodotto funziona a 220 Volt. Verificare che l'alimentatore soddisfi questo requisito.
  • Grado di protezione IP65: The spotlight is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction. It is suitable for outdoor use but should not be submerged in water.
  • Calore: Do not cover the spotlight during operation, as this may cause overheating.
  • Non dimmerabile: This LED spotlight is non-dimmable. Do not connect it to a dimmer switch.
  • Sorgente luminosa: The LED light source is not replaceable. If the light source fails, the entire luminaire must be replaced.

3. Contenuto della confezione

Controllare la confezione per assicurarsi che tutti i componenti siano presenti:

  • LEDVANCE 17W 2400LM LED Spotlight unit
  • Staffa di montaggio
  • Screws and wall anchors (may vary by region)
  • Manuale di istruzioni

4. Configurazione e installazione

Per una corretta installazione, seguire questi passaggi:

4.1 Preinstallazione

  • Spegni: Assicurarsi che l'alimentazione elettrica principale dell'area di installazione sia disattivata tramite l'interruttore automatico.
  • Selezione della posizione: Choose a suitable outdoor location for the spotlight. Consider the desired coverage area for the light and the effective range of the motion and light sensors. Ensure the mounting surface is sturdy enough to support the fixture.
  • Controllo delle dimensioni: Refer to the product dimensions to ensure adequate space for installation.
Diagram showing the dimensions of the LEDVANCE LED Spotlight

This diagram illustrates the physical dimensions of the LEDVANCE LED Spotlight. The front view mostra una larghezza di 157 mm e il lato view shows a height of 183 mm and a depth of 56.5 mm, providing crucial measurements for installation planning.

4.2 Montaggio

  1. Position the mounting bracket on the desired surface and mark the drilling points.
  2. Praticare i fori nei punti contrassegnati e, se necessario, inserire i tasselli a muro.
  3. Fissare la staffa di montaggio alla superficie utilizzando le viti fornite.
  4. Attach the LED spotlight unit to the mounting bracket, ensuring it is firmly secured. Adjust the angle of the spotlight as needed.

4.3 Cablaggio

  • Connect the spotlight's electrical wires to your mains power supply (220V). Ensure correct polarity (Live, Neutral, Earth) according to local wiring regulations.
  • Properly insulate all connections to prevent short circuits and ensure safety.
  • Once wiring is complete and secure, restore power to the circuit.
Product packaging for LEDVANCE Floodlight Sensor

This image displays the product packaging for the LEDVANCE Floodlight Sensor, highlighting key features such as 17W power, 2400 lumens, IP65 rating, 5-year guarantee, 4000K color temperature, and motion/light sensor capabilities. It also shows the product's model number and various certifications.

5. Istruzioni per l'uso

The LEDVANCE spotlight is designed for automatic operation based on its integrated motion and light sensors.

  • Light Sensor (Dusk-to-Dawn): The integrated light sensor detects ambient light levels. The spotlight will automatically activate when the ambient light falls below a certain threshold (e.g., at dusk) and deactivate when sufficient light is present (e.g., at dawn).
  • Sensore di movimento: The motion sensor detects movement within its detection range. When motion is detected, the spotlight will illuminate for a set duration. After the motion ceases and the set time expires, the light will turn off, provided the ambient light level is above the threshold set by the light sensor.
  • Regolazioni: While specific adjustment controls are not detailed, some models may feature adjustable settings for motion sensitivity, light threshold, and illumination duration. Refer to any labels on the fixture itself for potential adjustment dials.

6. Manutenzione

The LEDVANCE spotlight requires minimal maintenance.

  • Pulizia: Periodically clean the surface of the spotlight and the sensor lens with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or the sensor.
  • Ispezione: Regularly inspect the fixture for any signs of damage, loose wiring, or corrosion. Address any issues promptly.
  • Nessuna parte riparabile dall'utente: There are no user-serviceable parts inside the fixture. Do not attempt to open or repair the unit yourself.

7. Risoluzione Dei Problemi

If you encounter issues with your LEDVANCE spotlight, refer to the following common problems and solutions:

ProblemaPossibile causaSoluzione
La luce non si accende.Nessuna alimentazione elettrica.
Luce ambientale troppo alta.
Sensore di movimento non attivato.
Controllare l'interruttore automatico e il cablaggio.
Wait for dusk or test in a darker environment.
Ensure motion is within sensor range.
La luce rimane costantemente accesa.Rilevato movimento costante.
Malfunzionamento del sensore di luce.
Errore di cablaggio.
Check for obstructions or continuous movement in sensor's field of view.
Contact support if sensor is faulty.
Verificare i collegamenti elettrici.
Sfarfallio di luce.Alimentazione instabile.
Collegamento del cablaggio allentato.
Consultare un elettricista per verificare la stabilità dell'alimentazione elettrica.
Assicurarsi che tutti i collegamenti elettrici siano saldi (con l'alimentazione spenta).
Il sensore di movimento non rileva.Sensore ostruito.
Angolo del sensore errato.
Temperature too high/low for sensor.
Rimuovere eventuali ostruzioni dalla lente del sensore.
Adjust the sensor's angle for optimal coverage.
Assicurarsi che il funzionamento avvenga entro l'intervallo di temperatura specificato.

8. Specifiche

MarcaLEDVANCE
Numero di modello4099854309502
Cosatage17 Watt
Flusso luminoso2400 milioni di lire
Temperatura del colore4000K (bianco freddo)
Angolo del fascio100 gradi
Voltage220 Volt
Grado di protezione IPGrado di protezione IP65
MaterialeAlluminio
Dimensioni (L x P x A)Dimensioni: 15.7 x 3.8 x 18.3 cm
Peso dell'articolo576 grammi
DimmerabileNO
SensoriSensore di movimento, sensore di luce

9. Garanzia e supporto

This LEDVANCE spotlight comes with a Garanzia di 5 anno dalla data di acquisto. Questa garanzia copre difetti di materiali e lavorazione in condizioni di normale utilizzo.

For warranty claims, technical support, or any questions not covered in this manual, please contact your retailer or the LEDVANCE customer service directly. Keep your proof of purchase for warranty validation.

Documenti correlati - 4099854309502

Preview LEDVANCE SL ECO SOLAR E - Specifiche del prodotto e guida all'installazione
Dettagli completi sulla serie LEDVANCE SL ECO SOLAR E, tra cui specifiche tecniche, dimensioni, dati sulle prestazioni e istruzioni per l'installazione per vari modelli.
Preview LEDVANCE ENDURA FLOOD SOLAR SENSOR 10W: Guida all'installazione, al funzionamento e alla sicurezza
Guida completa per il sensore solare LEDVANCE ENDURA FLOOD SOLAR SENSOR da 10 W, che comprende installazione, modalità di funzionamento, funzioni di controllo remoto, specifiche tecniche e importanti avvertenze di sicurezza relative alla gestione della batteria.
Preview Faretti architettonici LEDVANCE: specifiche e guida all'installazione
Specifiche tecniche complete, dimensioni e istruzioni di installazione per i faretti architettonici LEDVANCE, incluse le serie AR SPOT1 e AR SPOT2. Include dati di prodotto dettagliati, gradi di protezione IP/IK, angoli di fascio e caratteristiche elettriche.
Preview LEDVANCE DAMPPROOF IP65 Lighting Fixtures - Technical Specifications and Installation Guide
Detailed technical specifications and installation instructions for LEDVANCE DAMPPROOF IP65 series lighting fixtures, including models DP 1200 and DP 1500 with various wattages and color temperatures. Covers dimensions, electrical data, luminous flux, efficiency, and installation steps.
Preview LEDVANCE FLOODLIGHT GEN4: specifiche, installazione e caratteristiche
Guida completa alla serie LEDVANCE FLOODLIGHT GEN4, con specifiche tecniche dettagliate, istruzioni di installazione, flussi luminosi e conformità di sicurezza per vari modelli.
Preview Tubo LED SubstiTUBE T5 HF (ECG) - Guida all'installazione e alla compatibilità
Informazioni dettagliate sul tubo LED LEDVANCE SubstiTUBE T5 HF (ECG), inclusi i requisiti di compatibilità ECG, i parametri operativi, le istruzioni di installazione e le specifiche tecniche per applicazioni di illuminazione professionale.