1. Introduzione
Thank you for choosing the hygger Aquarium Light Clip Holder (Model HG-957-Clip). This holder is designed to securely mount your hygger HG-957 series aquarium light above your fish tank, providing adjustable height and positioning. Constructed from durable plastic and aluminum, it ensures stability and longevity. Please read this manual thoroughly before installation and use to ensure proper setup and operation.
2. Informazioni sulla sicurezza
- Ensure the aquarium light is unplugged from the power source before installation or adjustment.
- Verify that the fish tank wall thickness is suitable for the clip holder (up to 1 inch / 2.5 cm).
- Do not overtighten screws, as this may damage the aquarium glass or the holder components.
- Keep all components away from children and pets.
- Questo prodotto è progettato esclusivamente per l'uso in ambienti interni con acquari.
- Regularly check the holder for any signs of wear or damage. Replace if necessary.
3. Contenuto della confezione
The hygger Aquarium Light Clip Holder package includes the following components:
- Braccio estensibile
- Palo in metallo
- Serbatoio clamp
- Short Screws (for attaching extendable arm and tank clamp)
- Long Screws (for securing the tank clamp)
Figura 3.1: Esploso view of the hygger Aquarium Light Clip Holder components, showing the extendable arm, metal pole, tank clamp, and various screws.
4. Guida all'installazione
Follow these steps to properly install your hygger Aquarium Light Clip Holder:
4.1. Assemble the Holder
- Attach the extendable arm to the top of the metal pole using one short screw. Ensure it is securely fastened but do not overtighten.
- Attach the tank clamp to the bottom of the metal pole using another short screw.
Figure 4.1: Assembly of the extendable arm to the metal pole using a short screw.
Figure 4.2: Assembly of the tank clamp to the metal pole using a short screw.
4.2. Mount to Aquarium
- Position the assembled holder onto the edge of your aquarium. Ensure the tank clamp securely grips the aquarium wall. This holder is suitable for fish tank wall thickness up to 1 inch (2.5 cm).
- Insert the two long screws into the tank clamp and tighten them to secure the holder firmly to the aquarium. Do not overtighten.
Figure 4.3: The hygger Aquarium Light Clip Holder securely mounted on an aquarium.
Figure 4.4: Detail of the tank clamp attachment to the aquarium glass.
4.3. Attach the Aquarium Light
- Slide your hygger HG-957 series aquarium light onto the extendable arm. The arm is designed to hold the light securely.
Figure 4.5: Attaching the aquarium light to the extendable arm. Note: Light not included.
Figure 4.6: The hygger Aquarium Light Clip Holder with a compatible light installed.
Video 4.1: This video demonstrates the installation process of the hygger Aquarium Light Clip Holder, including assembly and mounting to the aquarium. It also shows the light attached and adjusted.
5. Funzionamento e regolazioni
The hygger Aquarium Light Clip Holder offers flexibility in positioning your aquarium light.
5.1. Regolazione dell'altezza
To adjust the height of the light above the water surface:
- Loosen the plastic screw on the metal pole that secures the tank clamp.
- Slide the metal pole up or down to achieve the desired height. The pole features a size scale (inches and centimeters) for precise adjustment, up to 10.5 inches (26.5 cm).
- Once the desired height is reached, tighten the plastic screw to secure the position.
Figure 5.1: The holder's metal pole with a ruler scale for precise height adjustment, up to 10.5 inches (26.5 cm).
Figure 5.2: Detail of the height adjustment mechanism, showing the plastic screw and scale.
5.2. Adjusting Extension (Forward/Backward)
To adjust the horizontal position of the light (closer or further from the tank edge):
- Loosen the plastic screw on the extendable arm.
- Slide the arm forward or backward to position the light as desired.
- Tighten the plastic screw to secure the arm in place.
Figure 5.3: The adjustable extension plate allows for forward and backward positioning of the light.
Figure 5.4: Detail of the extension adjustment, showing the screw for securing the arm's position.
6. Manutenzione
To ensure the longevity and proper function of your hygger Aquarium Light Clip Holder, follow these simple maintenance guidelines:
- Pulizia: Pulire periodicamente il supporto con un panno morbido e asciutto.amp cloth to remove dust or water spots. Avoid using abrasive cleaners or solvents, as these can damage the finish.
- Ispezione: Regularly check all screws and connections to ensure they remain tight. If any component appears loose, gently tighten it.
- Controllo della corrosione: Although made of durable materials, inspect for any signs of corrosion, especially in humid environments.
7. Risoluzione Dei Problemi
If you encounter any issues with your hygger Aquarium Light Clip Holder, refer to the following common problems and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Holder is not stable on the tank. | Screws are not tightened sufficiently. Tank wall thickness exceeds 1 inch (2.5 cm). | Ensure all long screws on the tank clamp are securely tightened. Verify your tank wall thickness is within the specified limit. |
| Light slides off the extendable arm. | Light is not a hygger HG-957 series model. Extendable arm screw is loose. | Confirm your aquarium light is a compatible hygger HG-957 series model. Tighten the short screw securing the extendable arm. |
| Difficulty adjusting height or extension. | Le viti di regolazione sono troppo strette. | Loosen the relevant plastic screw slightly before attempting to adjust. Do not force adjustments. |
8. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Modello | HG-957-Clip |
| Compatible Light Series | hygger HG-957 series aquarium lights |
| Max. Tank Wall Thickness | 1 pollici (2.5 cm) |
| Altezza regolabile | Fino a 10.5 pollici (26.5 cm) |
| Materiale | Aluminum and Plastic (ABS/PC) |
| Dimensioni del prodotto | Approximately 4"L x 2"W x 8"H (when assembled and not extended) |
| Peso dell'articolo | Circa 8 once |
9. Garanzia e supporto
For warranty information or technical support, please refer to the official hygger website or contact hygger customer service directly. Keep your purchase receipt for warranty claims.
Informazioni sui contatti:
- Official hygger Websito: Visit the hygger Store on Amazon
- Customer Service: Refer to product packaging or the official websito per i dettagli di contatto più aggiornati.
