Sylvania A19 LED Light Bulbs Instruction Manual

1. Introduzione

Thank you for choosing Sylvania A19 LED Light Bulbs. This manual provides essential information for the safe installation, operation, and maintenance of your new LED bulbs. Please read these instructions carefully before use and retain them for future reference.

2. Prodotto finitoview

This package includes a combination of Sylvania A19 LED light bulbs designed to replace traditional incandescent bulbs. You will find both 40W equivalent (6W, 450 lumens) and 60W equivalent (8.5W, 800 lumens) bulbs, all featuring a soft white (2700K) color temperature and a standard medium (E26) base.

Image 1: Sylvania A19 LED Light Bulbs, showing both 40W and 60W equivalent bulbs in their packaging.

These energy-efficient bulbs offer instant illumination, long lifespan, and are free from UV/IR emissions, mercury, and lead.

3. Informazioni sulla sicurezza

• Rischio di scossa elettrica: Prima di ispezionare, installare o rimuovere la lampadina, spegnere sempre l'apparecchio.
• Solo per uso interno: These bulbs are designed for indoor use in dry locations. Do not use in wet or damp environments unless the fixture is specifically rated for such conditions.
• Non per apparecchi chiusi: Avoid using these bulbs in fully enclosed fixtures, as this can shorten their lifespan due to heat buildup.
• Non dimmerabile: These bulbs are non-dimmable. Do not use with dimmer switches, as this may cause damage to the bulb or dimmer.
• Temperatura di esercizio: Suitable for operation in temperatures between -20°C and +40°C (-4°F and +104°F).
• Peso: Do not use in fixtures where the bulb's weight might exceed the fixture's capacity.

4. Configurazione e installazione

Installation of Sylvania A19 LED light bulbs is straightforward. Follow these steps:

1. Spegnimento dell'alimentazione: Locate the light switch or circuit breaker controlling the fixture and turn off the power completely.
2. Rimuovere la vecchia lampadina: Svitare con cautela la lampadina esistente dal supporto. Lasciarla raffreddare se è stata utilizzata di recente.
3. Inserire una nuova lampadina a LED: Gently screw the Sylvania A19 LED bulb into the socket until it is snug. Do not overtighten.
4. Ripristina alimentazione: Riaccendere l'alimentazione tramite l'interruttore o il disgiuntore.
5. Test: Accendere l'interruttore della luce per assicurarsi che la lampadina si accenda correttamente.

Image 2: A set of four Sylvania A19 LED light bulbs, ready for installation.

5. Istruzioni per l'uso

Sylvania A19 LED light bulbs operate like traditional bulbs. Once installed, simply use the wall switch or fixture switch to turn the light on or off. These bulbs provide instant full brightness with no warm-up time.

6. Manutenzione

These LED bulbs require minimal maintenance due to their long lifespan of up to 11,000 hours.

• Pulizia: To clean the bulb, ensure the power is off and the bulb is cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Sostituzione: When the bulb reaches the end of its life, follow the installation steps in Section 4 to replace it with a new Sylvania A19 LED bulb. Dispose of old bulbs according to local regulations.

7. Risoluzione Dei Problemi

If your Sylvania A19 LED bulb does not light up after installation, consider the following:

• Nessun potere: Check if the light switch is in the 'ON' position. Verify that the circuit breaker for the fixture has not tripped.
• Collegamento allentato: Turn off the power, then carefully re-screw the bulb into the socket to ensure a secure connection.
• Incorrect Fixture: Ensure the fixture is compatible with A19 bulbs and has a medium (E26) base.
• Interruttore più fioco: Confirm that the fixture is not connected to a dimmer switch, as these non-dimmable bulbs are not compatible.
• Lampadina danneggiata: If the above steps do not resolve the issue, the bulb may be faulty. Replace it with a new one.

8. Specifiche

9. Garanzia e supporto

For warranty information or technical support, please refer to the packaging or contact LEDVANCE customer service directly. Keep your purchase receipt as proof of purchase.