Manuale di istruzioni del pannello luminoso rosso MitoMIN 2.0

1. Informazioni importanti sulla sicurezza

Please read all instructions carefully before using your MitoMIN 2.0 Red Light Panel. Keep this manual for future reference.

• Tenere fuori dalla portata dei bambini.
• Non utilizzare se il dispositivo è danneggiato.
• Le dichiarazioni relative agli integratori alimentari non sono state valutate dalla FDA e non intendono diagnosticare, trattare, curare o prevenire alcuna malattia o condizione di salute.
• Consult a qualified health professional before using this product, especially if you have pre-existing medical conditions or are taking medications.
• Always use the provided eye protection during operation to shield your eyes from the intense light.
• Non fissare direttamente le luci LED.
• Assicurare una ventilazione adeguata attorno al dispositivo durante l'uso.

2. Prodotto finitoview

The MitoMIN 2.0 Red Light Panel is an advanced red light therapy device designed for at-home use. It features a combination of red (660 nm) and near-infrared (850 nm) wavelengths to support various wellness benefits.

Figure 1: MitoMIN 2.0 Red Light Panel with adjustable stand.

Caratteristiche principali:

• Tecnologia LED avanzata: Utilizes precise 660 nm (Red) and 850 nm (NIR) wavelengths.
• High-Powered Diodes: Equipped with 60 high-powered LED diodes for effective light delivery.
• Pannello di controllo digitale: Features an intuitive digital control panel with a timer.
• Whisper-Quiet Fans: Integrated fans ensure quiet operation during sessions.
• Modalità multiple: Select between Red Only, Near Infrared Only, or Both wavelengths.
• Targeted Coverage: Measures 12" x 9" x 3", ideal for targeted application on face, neck, or specific body areas.
• Third-Party Tested: Diagnostic testing ensures power and spectral output.
• Idoneo per FSA/HSA: May be eligible for Flexible Spending Account or Health Savings Account reimbursement.

3. Istruzioni per l'installazione

Follow these steps to set up your MitoMIN 2.0 Red Light Panel:

1. Disimballare il dispositivo: Carefully remove the MitoMIN 2.0 panel and all accessories from its packaging.
2. Posizionare il pannello: The device can be used in several ways:
   • Utilizzo del supporto integrato: Extend the adjustable bracket on the back of the panel to prop it up on a flat surface.
   • Hanging the Panel: Utilize the suspension kit (if included) to hang the panel from a door or wall at your desired height. Ensure it is securely mounted.
3. Connetti alimentazione: Locate the power input on the back of the device. Connect the provided power cord to the panel and then plug the other end into a standard electrical outlet.
4. Power On Main Switch: Flip the red power switch on the back of the device to the 'ON' position. The digital display on the side panel should illuminate.

Figure 2: Visual guide for connecting the power cable and positioning the MitoMIN 2.0.

4. Istruzioni per l'uso

Once set up, operate your MitoMIN 2.0 as follows:

1. Indossare protezioni per gli occhi: Always put on the provided protective eyewear before activating the device.
2. Imposta il tempo di trattamento: Use the '+' and '-' buttons on the digital control panel to adjust the session duration. The timer can be set from 1 to 30 minutes.
3. Seleziona modalità: Press the 'MODE' button to cycle through the available light modes:
   • Red Only: Activates only the 660 nm red light LEDs.
   • NIR Only: Activates only the 850 nm near-infrared light LEDs.
   • Entrambi: Activates both red and near-infrared LEDs simultaneously.
4. Inizia sessione: Press the 'ON/OFF' button (power symbol) on the control panel to begin your therapy session. The selected lights will illuminate.
5. Posizionati: Sit or stand comfortably in front of the panel, ensuring the target area of your body is exposed to the light. Maintain a distance of approximately 6-12 inches from the device.
6. Fine sessione: The device will automatically turn off once the set time has elapsed. You can also manually end the session at any time by pressing the 'ON/OFF' button again.
7. Turn Off Main Switch: After your session, flip the red power switch on the back of the device to the 'OFF' position.

Figure 3: Digital control panel with timer and mode selection buttons.

Utilizzo consigliato:

For optimal results, follow the manufacturer's recommended treatment plans. Typical sessions range from 10-20 minutes, 3-5 times per week, depending on individual needs and desired outcomes.

5. Manutenzione

Proper care ensures the longevity and performance of your MitoMIN 2.0:

• Pulizia: Ensure the device is unplugged and completely cool before cleaning. Use a soft, dry cloth to wipe the surface of the panel. Do not use abrasive cleaners or immerse the device in water.
• Magazzinaggio: Store the device in a cool, dry place away from direct sunlight and moisture. Keep it in its original packaging or a protective cover when not in use.
• Gestione: Handle the device with care to avoid dropping or impacting it, which could damage the LEDs or internal components.

6. Risoluzione Dei Problemi

If you encounter any issues with your MitoMIN 2.0, refer to the following:

If troubleshooting steps do not resolve the issue, please contact Mito Red Light customer support.

7. Specifiche

Detailed specifications for the MitoMIN 2.0 Red Light Panel:

Figure 4: Excerpt from LightLab International Test Report (Page 1 of 12).

Figure 5: Excerpt from LightLab International Test Report (Page 11 of 12) showing spectral power distribution.

8. Garanzia e supporto

For warranty information, product support, or any questions regarding your MitoMIN 2.0 Red Light Panel, please contact Mito Red Light directly through their official website or the contact information provided with your purchase. Ensure you have your purchase details and model number (MINWHT) available when contacting support.