Manuale utente dell'altoparlante Bluetooth da collo SHARP AQUOS Sound Partner AN-SX8

1. Introduzione

This manual provides essential instructions for the safe and effective use of your SHARP AQUOS Sound Partner Bluetooth Neck Speaker AN-SX8. Please read this manual thoroughly before using the product and retain it for future reference. This device is designed to deliver a personal audio experience while allowing you to remain aware of your surroundings.

2. Prodotto finitoview

The SHARP AQUOS Sound Partner AN-SX8 is a wireless neck speaker designed for comfortable, immersive audio. It features Bluetooth connectivity for wireless audio streaming and an AUX input for wired connections. Its lightweight design allows for extended wear.

Figura 1: SHARP AQUOS Sound Partner AN-SX8 Neck Speaker. This image displays the black, U-shaped neck speaker with control buttons visible on the top surface of the speaker units.

3. Impostazione

3.1 Ricarica del dispositivo

Before initial use, fully charge the AN-SX8. Connect the provided USB charging cable to the charging port on the device and to a USB power adapter (not included) or a computer's USB port. The charging indicator light will illuminate during charging and turn off or change color when charging is complete.

3.2 Accensione/Spegnimento

• To power on: Press and hold the Power button for approximately 3 seconds until the indicator light flashes.
• To power off: Press and hold the Power button for approximately 3 seconds until the indicator light turns off.

3.3 Accoppiamento Bluetooth iniziale

1. Ensure the AN-SX8 is powered off.
2. Tenere premuto il pulsante di accensione per circa 5-7 secondi finché la spia luminosa non lampeggia rapidamente, indicando la modalità di associazione.
3. On your Bluetooth-enabled device (smartphone, tablet, TV), go to the Bluetooth settings and search for available devices.
4. Select "AN-SX8" from the list of found devices.
5. Once connected, the indicator light on the AN-SX8 will stop flashing rapidly and may glow steadily or flash slowly.

4. Istruzioni per l'uso

4.1 Connessione Bluetooth

After initial pairing, the AN-SX8 will automatically attempt to connect to the last paired device when powered on. If it does not connect automatically, manually select "AN-SX8" from your device's Bluetooth settings.

4.2 Collegamento AUX

To use a wired connection, connect one end of a 3.5mm audio cable (not included) to the AUX input port on the AN-SX8 and the other end to the audio output jack of your device. The device will automatically switch to AUX mode when a cable is detected.

4.3 Controllo del volume

• Premere il tasto Volume su (+) pulsante per aumentare il volume.
• Premere il tasto Volume basso (-) pulsante per diminuire il volume.

4.4 Playback Control (Bluetooth Mode)

• Premere il tasto Riproduci/Pausa premere il pulsante una volta per riprodurre o mettere in pausa l'audio.
• Premere due volte il tasto Riproduci/Pausa pulsante per passare al brano successivo.
• Premi tre volte il Riproduci/Pausa pulsante per passare alla traccia precedente.

4.5 Gestione delle chiamate (modalità Bluetooth)

• Premere il tasto Riproduci/Pausa pulsante una volta per rispondere a una chiamata in arrivo.
• Premere il tasto Riproduci/Pausa premere il pulsante una volta durante una chiamata per terminarla.
• Premere e tenere premuto il tasto Riproduci/Pausa pulsante per 2 secondi per rifiutare una chiamata in arrivo.

5. Manutenzione

5.1 Pulizia

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners, alcohol, or chemical solvents, as these may damage the surface. Avoid getting moisture into any openings.

5.2 Conservazione

When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures. Fully charge the battery before storing and recharge it every few months to maintain battery health.

5.3 Cura della batteria

The AN-SX8 contains a built-in rechargeable battery. Do not attempt to replace the battery yourself. Avoid exposing the device to extreme heat or cold, as this can shorten battery life. Dispose of the battery according to local regulations.

6. Risoluzione Dei Problemi

• Nessun potere: Assicurati che il dispositivo sia completamente carico. Collegalo a una fonte di alimentazione e controlla l'indicatore di carica.
• Nessun suono:
  • Check the volume level on both the AN-SX8 and your connected device.
  • Ensure the device is correctly paired via Bluetooth or the AUX cable is securely connected.
  • Se si utilizza il Bluetooth, provare a disconnettere e riassociare il dispositivo.
• Problemi di connessione Bluetooth:
  • Ensure the AN-SX8 is in pairing mode or discoverable.
  • Move the AN-SX8 closer to your Bluetooth device.
  • Disattiva e attiva il Bluetooth sul dispositivo sorgente.
  • Clear the AN-SX8 from your device's Bluetooth list and re-pair.
• Suono distorto:
  • Reduce the volume on both the AN-SX8 and your connected device.
  • Ensure there are no obstructions or interference between the AN-SX8 and your Bluetooth device.
  • Controllare la sorgente audio per eventuali problemi di qualità.

7. Specifiche

8. Informazioni sulla sicurezza

• Non esporre il dispositivo ad acqua, umidità o temperature estreme.
• Evitare l'ascolto prolungato ad alto volume per prevenire danni all'udito.
• Non tentare di smontare, riparare o modificare il dispositivo.
• Tenere fuori dalla portata dei bambini e degli animali domestici.
• Dispose of the device and its battery responsibly according to local environmental regulations.

9. Garanzia e supporto

For warranty information and technical support, please refer to the official SHARP website or contact SHARP customer service. Keep your proof of purchase for warranty claims. Specific warranty terms may vary by region.

Per ulteriore assistenza, visitare il sito SHARP Support Websito (exampil collegamento, il collegamento effettivo può variare).