1. Prodotto finitoview
The VIMIN 5-Port Gigabit PoE Switch is an unmanaged Ethernet switch designed for reliable high-speed data transmission and power delivery over network cables. It features four Power over Ethernet (PoE+) RJ45 ports and one Gigabit uplink port, making it suitable for connecting various network devices such as NVRs, IP cameras, access points, and more. Its robust metal housing allows for versatile installation options, including desktop placement or wall-mounting.
Image: The VIMIN 5-Port Gigabit PoE Switch, showcasing its compact design and front panel with ports and indicators.
Le caratteristiche principali includono:
- 4x Gigabit PoE+ Ports: Delivers up to 30W per port with a total power budget of 72W, supporting IEEE 802.3af/at standards.
- 1x Gigabit Uplink Port: For high-speed connection to your main network or NVR.
- One-Key VLAN Mode: Enhances network security and bandwidth by isolating PoE ports while maintaining uplink communication.
- Collega e usa: Requires no complex configuration for immediate use.
- Protezione robusta: Features 4KV lightning protection for enhanced device safety.
- Design senza ventole: Ensures silent operation, suitable for various environments.
2. Istruzioni per l'installazione
Follow these steps to set up your VIMIN 5-Port Gigabit PoE Switch:
- Disimballare il dispositivo: Carefully remove the PoE switch, power cable, and user manual from the packaging.
- Connetti alimentazione: Connect the included power cable to the power input port on the back of the switch and then plug it into a standard electrical outlet. The power indicator light on the front panel should illuminate.
- Connect Uplink Device: Connect your router, NVR, or main network device to the Gigabit uplink port (Port 5) using a standard Ethernet cable.
- Collegare i dispositivi PoE: Connect your PoE-compatible devices (e.g., IP cameras, access points, VoIP phones) to any of the PoE+ ports (Ports 1-4) using Ethernet cables. The switch will automatically detect and power these devices if they are IEEE 802.3af/at compliant.
- Verifica connessioni: Check the LED indicators on the front panel. The 'Power' LED should be solid green. The 'Link/Act' LEDs for connected ports should be solid green (link) and blink (activity).
Image: Illustration of the PoE switch's front and rear, highlighting the built-in power supply and port designations (PoE ports 1-4, Uplink port 5).
Image: A visual guide to the plug-and-play setup, showing power connection, device connection (camera, AP, computer, printer), and network router connection.
The switch is designed for plug-and-play operation, requiring no software configuration for basic network functionality.
Image: The VIMIN PoE switch with its dimensions (14cm/5.5in length, 20cm/7.9in width, 4.4cm/1.7in height), emphasizing its compact size and plug-and-play nature.
Metodi di installazione
The VIMIN PoE switch offers flexible installation options:
- Posizionamento sul desktop: Basta posizionare l'interruttore su una superficie piana e stabile.
- Montaggio a parete: Il metallo casing is designed for easy wall-mounting using appropriate screws (not included).
Image: Two installation methods are depicted: the switch placed on a desk and mounted vertically on a wall, demonstrating its versatility.
3. Istruzioni per l'uso
Once the switch is powered on and devices are connected, it operates automatically. Here are specific operational features:
Funzionalità della porta
- Porte PoE+ (1-4): These ports provide both data connectivity and power to connected IEEE 802.3af/at compliant devices. Each port can deliver up to 30W.
- Uplink Port (5): This port is a standard Gigabit Ethernet port for connecting to your main network infrastructure. It does not provide PoE.
Image: The PoE switch is shown as a central hub connecting an Access Point, Router, Computer, Camera, Printer, and IP Phone, illustrating its broad compatibility.
One-Key VLAN Mode
The switch features a One-Key VLAN mode to enhance network security and performance. To activate or deactivate VLAN mode, use the dedicated switch on the front panel:
- VLAN ON: In this mode, PoE ports 1-4 are isolated from each other, preventing direct communication between devices connected to these ports. They can still communicate with the uplink port (Port 5). This is useful for preventing IP camera interference or enhancing security in multi-device setups.
- VLAN OFF (Ordinary Mode): All connected devices can communicate directly with each other, as in a standard unmanaged switch.
Image: A visual representation of the VLAN toggle switch on the PoE device, explaining the 'ON' (VLAN Mode) and 'OFF' (Ordinary Mode) functionalities with their respective benefits.
Prestazioni gigabit
The switch supports Gigabit Ethernet (1000 Mbps) on all ports, providing significantly faster data transfer rates compared to traditional 100 Mbps networks.
Image: A graphic demonstrating that the Gigabit switch offers speeds 10 times faster than a 100Mbps network, highlighting its superior performance.
4. Manutenzione e cura
To ensure optimal performance and longevity of your VIMIN PoE Switch, consider the following:
- Condizioni ambientali: Operate the switch within its specified temperature range (14°F to 131°F / -10°C to 55°C) and humidity levels. Avoid direct sunlight, excessive heat sources, and damp ambienti.
- Pulizia: Utilizzare un panno morbido e asciutto per pulire l'esterno dell'interruttore. Non utilizzare detergenti liquidi o spray.
- Ventilazione: Ensure proper airflow around the switch. Although it has a fanless design, adequate ventilation helps dissipate heat.
- Protezione contro i fulmini: The switch features 4KV lightning protection. While this provides significant safeguarding, it is still advisable to disconnect the switch during severe electrical storms if possible.
- Design senza ventole: The fanless design contributes to silent operation and reduces dust accumulation inside the device, minimizing maintenance needs.
Image: The PoE switch is depicted in both cold (14°F) and hot (131°F) environments, emphasizing its reliability under extreme temperature conditions.
Image: The PoE switch is shown in a quiet home setting, illustrating its fanless design for zero noise and its durable metal casing.
5. Risoluzione Dei Problemi
If you encounter issues with your VIMIN PoE Switch, refer to the following common troubleshooting steps:
- Nessun potere:
- Assicurarsi che il cavo di alimentazione sia collegato saldamente sia all'interruttore sia a una presa elettrica funzionante.
- Verificare che la presa di corrente funzioni collegandovi un altro dispositivo.
- Nessun collegamento/attività sulla porta:
- Verify that the Ethernet cable is properly connected at both ends (switch port and connected device).
- Provare un cavo Ethernet diverso per escludere problemi con il cavo.
- Assicurarsi che il dispositivo collegato sia acceso e funzioni correttamente.
- For PoE ports, confirm the connected device is IEEE 802.3af/at compliant. Passive PoE devices are not supported.
- Dispositivo PoE non riceve alimentazione:
- Check the total power budget (72W) and individual port power (30W). Ensure you are not exceeding the switch's capacity with multiple high-power devices.
- Verify the device requires PoE and is compatible with IEEE 802.3af/at standards.
- Prova a collegare il dispositivo a una porta PoE diversa.
- Network Performance Issues (Slow Speed):
- Assicurarsi che tutti i dispositivi e i cavi collegati supportino Gigabit Ethernet per una velocità ottimale.
- Verificare la presenza di traffico di rete eccessivo o loop.
- If VLAN mode is enabled, ensure it is configured as desired for your network setup.
- Devices on PoE Ports Cannot Communicate with Each Other:
- Check the One-Key VLAN switch. If it is in 'ON' position, ports 1-4 are isolated. Switch it to 'OFF' for direct communication between these ports.
If issues persist after following these steps, please contact VIMIN customer support.
6. Specifiche
Detailed technical specifications for the VIMIN 5-Port Gigabit PoE Switch:
| Caratteristica | Descrizione |
|---|---|
| Numero di modello | 5 Port | 4xPoE + 72W | 1xUPLink |
| Numero di porte | 5 (4x PoE+, 1x Uplink) |
| PoE standard | IEEE 802.3af/at (Note: Does NOT support passive PoE) |
| Potenza massima per porta PoE | 30W |
| Budget totale di alimentazione PoE | 72W |
| Velocità di trasferimento dati | 1000 Megabit al secondo (Gigabit Ethernet) |
| Capacità di commutazione | 10 Gbps |
| Tipo di interfaccia | PoE, RJ45 |
| Materiale della cassa | Metallo |
| Installazione | Desktop or Wall-Mount |
| Dimensioni (L x P x A) | 14 cm x 20 cm x 4.4 cm (5.5 pollici x 7.9 pollici x 1.7 pollici) |
| Peso dell'articolo | 1.94 libbre (0.88 chilogrammi) |
| Temperatura di esercizio | Da 14°F a 131°F (da -10°C a 55°C) |
| Componenti inclusi | 1* User Manual, 1* 5-Port PoE Switch, 1* Power Cable |
| Dispositivi compatibili | Access Point, Camera, Computer, Printer, Router |
| Codice UPC | 756166576957 |
Image: A visual representation of the power capabilities, indicating 30W per PoE port and a total power budget of 72W for the switch.
Image: A diagram illustrating the 10 Gbps switching capacity of the VIMIN PoE switch, indicating its high-speed data processing capability.
7. Garanzia e supporto
VIMIN is committed to providing reliable products and excellent customer service. For specific warranty details, please refer to the documentation included with your product or visit the official VIMIN websito.
Assistenza clienti
If you require technical assistance, have questions about your product, or need to report an issue, please contact our support team:
- Supporto via e-mail: support@vimintech.com
- Professional Technical Team: Access to a dedicated team for technical inquiries.
- 24H High Quality Service: Committed to providing timely and effective support.
Image: Contact details for VIMIN support, including email address, mention of a professional technical team, and 24-hour high-quality service.
