Murata 371 SR920SW

Manuale utente della batteria a bottone all'ossido d'argento Murata 371 SR920SW da 1.55 V

Model: 371 SR920SW

1. Introduzione

Thank you for choosing Murata 371 SR920SW Silver Oxide Button Cell Batteries. Murata has over 40 years of expertise in developing and manufacturing high-performance micro batteries. These batteries are designed to provide reliable and long-lasting power for a wide range of personal electronic devices.

The Murata 371 SR920SW is a 1.55V Silver Oxide battery with a nominal capacity of 35mAh. It is manufactured in Japan, is 0% Mercury, and RoHS Compliant, reflecting a commitment to quality and environmental responsibility.

Murata 371 SR920SW batteries in blister packaging

Image 1: Murata 371 SR920SW batteries in their original blister packaging.

2. Caratteristiche del prodotto

Close-up of a Murata SR920SW battery showing 0% Mercury label

Immagine 2: Primo piano view of a Murata SR920SW battery, highlighting its 0% Mercury content.

3. Configurazione e installazione

These batteries are designed for easy replacement in compatible devices. Always refer to your device's specific instruction manual for detailed battery replacement procedures, as steps may vary.

Passaggi generali di installazione:

  1. Identificare il vano batteria: Locate the battery compartment on your device. This is often on the back or underside, secured by screws or a small latch.
  2. Scomparto aperto: Carefully open the battery compartment using appropriate tools (e.g., a small screwdriver or watch case opener).
  3. Rimuovere la vecchia batteria: Note the orientation of the old battery (positive (+) and negative (-) terminals). Gently remove the old battery.
  4. Inserire una nuova batteria: Insert the new Murata 371 SR920SW battery, ensuring the correct polarity. The positive (+) side is typically facing upwards.
  5. Scomparto sicuro: Chiudere bene il vano batterie.
  6. Dispositivo di prova: Power on your device to confirm proper function.
A Murata button cell battery being installed into a watch movement with tweezers

Image 3: Illustrative image of a button cell battery being carefully placed into a watch movement using tweezers.

Compatibilità:

The Murata 371 SR920SW battery is a common replacement for various watch and small electronic device batteries. It is equivalent to Sony 371 and other similar models. Always verify the required battery type for your specific device.

List of various Murata watch battery models and their corresponding numbers

Image 4: A visual guide displaying various Murata watch battery models and their corresponding reference numbers.

4. Linee guida operative

Once correctly installed, the Murata 371 SR920SW battery will power your device. These silver oxide batteries are known for their stable voltage output throughout their lifespan, which is crucial for devices requiring consistent power, such as watches.

5. Manutenzione e conservazione

Proper handling and storage can extend the life of your batteries and ensure safety.

6. Risoluzione Dei Problemi

Se il dispositivo non funziona correttamente dopo l'installazione della batteria, tenere presente quanto segue:

7. Informazioni sulla sicurezza

ATTENZIONE: TENERE LE BATTERIE FUORI DALLA PORTATA DEI BAMBINI.

8. Specifiche

AttributoDettaglio
Tipo di batteria371 SR920SW Silver Oxide Button Cell
Voltage1.55V
Capacità nominale35mAh
Temperatura di esercizioda -10°C a +60°C
Contenuto di mercurio0% Mercury
ConformitàConforme alla direttiva RoHS
OrigineFatto in Giappone
Dimensioni del pacco2.09 x 1.02 x 0.75 pollici
Peso dell'articolo0.634 once (confezione)
Usi consigliatiWatch, remotes, car keyfobs, medical devices, wearables, calculators, digital thermometers, toys

9. Supporto

For further assistance or inquiries regarding Murata products, please visit the official Murata Store on Amazon.

Documenti correlati - 371 SR920SW

Preview Manuale di installazione Murata 2CX: schema di terra, layout PIN, volume di alimentazionetage, Antenna
Guida all'installazione del modulo Murata 2CX, che descrive in dettaglio lo schema di terra, il layout dei PIN, il volume di alimentazionetagspecifiche e considerazioni sulla progettazione dell'antenna. Include numeri di identificazione FCC e IC.
Preview Manuale utente del modulo Bluetooth a basso consumo energetico Murata 2JV
Manuale utente per il modulo Murata 2JV Bluetooth Low Energy, che copre la conformità FCC, le configurazioni dei terminali, le dimensioni, la marcatura e le condizioni operative.
Preview Guida introduttiva all'SDK Murata TypeABR AWS FreeRTOS
This guide provides essential instructions for software and firmware engineers to effectively utilize the AWS FreeRTOS SDK with the Murata TypeABR module. It details the process of setting up the development environment, building AWS demos, running firmware, and monitoring cloud communications.
Preview Murata LBUA5QJ2AB UWB+BLE Module User Manual and Compliance Information
User manual and regulatory compliance information for the Murata LBUA5QJ2AB UWB+BLE module, including FCC and IC certifications, antenna application guidance, and installation requirements for host product manufacturers.
Preview Specifiche della serie BLM15PX delle perle di ferrite a chip Murata
Reference specification for Murata's BLM15PX series chip ferrite beads, designed for automotive electronics and compliant with AEC-Q200 standards. Includes detailed part numbering, ratings, electrical performance, testing conditions, dimensions, marking, packaging, and usage precautions.
Preview Manuale utente della libreria Murata per l'ambiente di progettazione AWR Cadence (Microwave Office)
Manuale utente per l'installazione e l'utilizzo della libreria di modelli elettrici Murata MLCC e RF-inductor all'interno dell'AWR Design Environment Microwave Office (MWO) di Cadence. Descrive l'ambiente operativo, le fasi di installazione e l'utilizzo.