1. Introduzione
The FLAMMA FC02 Mini Reverb Pedal is a compact digital guitar effects pedal designed to add rich, ambient reverb to your sound. It features three distinct reverb effects and intuitive controls, all housed in a durable metal casing. This manual provides essential information for setting up, operating, and maintaining your FC02 pedal.
Image 1.1: The FLAMMA FC02 Mini Reverb Pedal, showcasingrazie al suo design compatto e alla disposizione dei comandi.
2 Caratteristiche
- Three Reverb Effects: Choose between Studio, Church, and Plate reverb types.
- Vero bypass: Ensures your guitar signal remains unaltered when the pedal is disengaged.
- Design compatto: Mini pedal size for efficient pedalboard space utilization.
- Costruzione durevole: Metallo pieno casing with a frosted texture for longevity.
- Comandi intuitivi: DECAY, MIX, and TONE knobs for precise sound shaping.
Image 2.1: Visual representation of the three distinct reverb effects available on the FC02 pedal.
3. Controlli e collegamenti
Familiarize yourself with the pedal's controls and connection points:
Image 3.1: Detailed diagram of the FC02 pedal's controls and connection points.
- Interruttore a pedale: Engages or disengages the effect.
- Indicatore LED: Si illumina quando l'effetto è attivo.
- Manopola MIX: Adjusts the blend between the dry (unaffected) and wet (effected) signal.
- Manopola DECAY: Controls the length or duration of the reverb tail.
- Ingresso Jack: 1/4 inch (6.35mm) mono audio input for your instrument.
- Interruttore tipo riverbero: Selects between Studio, Church, and Plate reverb effects.
- Jack di uscita: 1/4 inch (6.35mm) mono audio output to your amplificatore o pedale successivo.
- Manopola TONE: Adjusts the tonal character of the reverb effect.
- Ingresso CC 9 V: Power supply connection (center negative, 9V DC, minimum 210mA).
4. Impostazione
- Collegamento elettrico: Connect a 9V DC power adapter (center negative, minimum 210mA) to the DC 9V input jack. The power adapter is not included with the pedal.
- Collegamento dello strumento: Collega la tua chitarra o altro strumento al Presa di ingresso using a 1/4 inch instrument cable.
- AmpCollegamento lifier: Collegare il Jack di uscita al tuo amplifier or the input of the next pedal in your signal chain using a 1/4 inch instrument cable.
- Signal Chain Placement: Reverb pedals are typically placed towards the end of your effects chain, after modulation and drive pedals, but before delay pedals if you prefer a distinct delay effect. Experiment with placement to find your preferred sound.
Image 4.1: The FC02 pedal connected in a typical guitar signal chain.
5. Istruzioni per l'uso
- Engaging/Disengaging the Effect: Press the footswitch to toggle the reverb effect on or off. The LED indicator will illuminate when the effect is active.
- Selecting Reverb Type: Use the 3-way toggle switch to select your desired reverb effect:
- Studio: A versatile room reverb effect.
- Chiesa: A large, expansive reverb with a deep, natural response.
- Piatto: A classic plate reverb simulation.
Image 5.1: The reverb type selection switch.
- Adjusting DECAY: Ruotare il DECADIMENTO knob clockwise to increase the length of the reverb tail, and counter-clockwise to shorten it.
Image 5.2: Adjusting the DECAY knob.
- Adjusting MIX: Girare il MESCOLARE knob to control the balance between your original guitar signal and the added reverb effect. A higher setting increases the reverb's prominence.
Image 5.3: Adjusting the MIX knob.
- Adjusting TONE: Utilizzare il TONO knob to shape the brightness or darkness of the reverb effect.
6. Manutenzione
- Pulizia: Utilizzare un panno morbido e asciutto per pulire l'esterno del pedale. Evitare detergenti abrasivi o solventi.
- Magazzinaggio: Conservare il pedale in un ambiente asciutto, lontano da temperature estreme e dalla luce solare diretta.
- Cura del cavo: Assicurarsi che tutti i cavi siano in buone condizioni e correttamente collegati per evitare perdite o danni al segnale.
- Alimentazione elettrica: Always use a compatible 9V DC center-negative power supply to avoid damage to the unit.
7. Risoluzione Dei Problemi
- Nessun suono:
- Controllare tutti i collegamenti dei cavi (ingresso, uscita, alimentazione).
- Ensure the power supply is correctly connected and providing the specified 9V DC.
- Verifica che il tuo strumento e amplifier funzionino correttamente.
- Suono debole o distorto:
- Verificare l'integrità del cavo.
- Ensure the power supply meets the minimum current requirement (210mA).
- Adjust the MIX and TONE knobs to ensure desired effect levels.
- Rumore indesiderato:
- Assicurarsi di utilizzare un alimentatore regolato.
- Check for ground loops if using multiple pedals.
- Assicurarsi che tutti i cavi siano schermati e in buone condizioni.
8. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Modello | FC02 |
| Effetti | Studio, Church, Plate Reverb |
| Ingresso/uscita | 1/4 inch (6.35mm) Mono Audio Jack |
| Requisiti di potenza | 9V DC (center negative), minimum 210mA |
| Dimensioni (L x P x A) | 3.27" x 1.85" x 2.05" (83 mm x 47 mm x 52 mm) |
| Peso | 153 grammi (5.4 once) |
| Materiale | Metallo |
| Elaborazione del segnale | Digitale |
Image 8.1: Physical dimensions of the FC02 pedal.
9. Garanzia e supporto
For detailed warranty information, product support, or service inquiries, please refer to the official FLAMMA website or contact FLAMMA customer service directly.
