BISSELL 23159

Manuale utente del pulitore per pavimenti duri BISSELL Spinwave Cordless Hard Floor Expert Spin Mop 18V

Modello: 23159

Introduzione

The BISSELL Spinwave Cordless Hard Floor Expert Spin Mop Cleaner 18V is designed to simplify hard floor cleaning. This cordless device effectively cleans sealed hard floors such as wood, tile, linoleum, and vinyl, removing tough messes with ease. Its lightweight design and swivel steering enhance maneuverability, making it suitable for various areas in your home.

Informazioni sulla sicurezza

Please read all instructions before using your BISSELL Spinwave Cordless Hard Floor Expert Spin Mop. Failure to follow the warnings and instructions may result in electric shock, fire, or serious injury.

Contenuto della confezione

Your BISSELL Spinwave Cordless Hard Floor Expert Spin Mop package includes the following items:

BISSELL Spinwave Cordless Mop with pads and cleaning solutions

Image: The BISSELL Spinwave Cordless Hard Floor Expert Spin Mop, along with its charging adapter, four mop pads, and two trial-size cleaning solutions.

Impostare

1. Assemblaggio

The BISSELL Spinwave Cordless Mop typically requires minimal assembly. Ensure the handle is securely attached to the main body of the mop. Refer to the quick start guide included in your packaging for specific handle attachment instructions if needed.

2. Carica della batteria

Before first use, fully charge the 18V Lithium-Ion battery. The battery is pre-installed. Connect the charging adapter to the mop and plug it into a wall outlet. A full charge takes approximately four hours. The battery indicator lights on the mop will show charging status.

3. Attaching Mop Pads

Select the appropriate mop pads for your cleaning task. The package includes two soft pads for gentle cleaning and two scrubby pads for tougher messes. Align the mop pads with the hook and loop fasteners on the bottom of the mop head and press firmly to secure them.

Close-up of mop pads attached to the Spinwave cleaner

Immagine: Primo piano view of the mop pads, showing their attachment mechanism to the Spinwave cleaner head.

Istruzioni per l'uso

1. Riempimento del serbatoio della soluzione

Remove the clean water tank from the mop. Unscrew the cap and fill the tank with warm water up to the indicated 'WATER' line. Add your preferred BISSELL cleaning formula up to the 'FORMULA' line. Replace the cap and reinsert the tank into the mop until it clicks into place.

Hand pouring cleaning solution into the BISSELL Spinwave water tank

Image: A hand pouring cleaning solution into the removable water tank of the BISSELL Spinwave mop, demonstrating the filling process.

2. Accensione/Spegnimento

To turn the mop on, press the power button located on the handle. The mop pads will begin to spin. To turn it off, press the power button again.

3. Utilizzo della funzione spray

Press the spray trigger on the handle to dispense cleaning solution onto the floor. Control the amount of solution by pressing the trigger as needed. This allows for targeted cleaning of specific areas or stains.

BISSELL Spinwave mop spraying cleaning solution onto a hard floor

Image: The BISSELL Spinwave mop actively spraying cleaning solution onto a hard floor, highlighting the on-demand spray feature.

4. Maneuvering the Mop

The Spinwave mop features a lightweight design and swivel steering, making it easy to maneuver around furniture and into tight spaces. The spinning pads help propel the mop forward, requiring minimal effort from the user.

BISSELL Spinwave mop cleaning around furniture legs

Image: The BISSELL Spinwave mop demonstrating its swivel steering capability by cleaning around the legs of a chair.

5. Recommended Floor Types

This appliance is safe for use on all sealed hard floors, including wood, tile, linoleum, and vinyl. It is designed to clean effectively without causing damage or scratches.

BISSELL Spinwave mop cleaning a sealed hard floor with layers of different floor types shown

Image: The BISSELL Spinwave mop cleaning a sealed hard floor, with an inset graphic illustrating various compatible floor types like wood, tile, and linoleum.

Manutenzione

1. Pulizia dei panni per mocio

After each use, remove the mop pads from the mop head. The pads are machine washable. Wash them with similar items in warm water. Do not use bleach or fabric softener. Tumble dry low.

2. Emptying and Cleaning the Solution Tank

Empty any remaining solution from the tank after each use. Rinse the tank thoroughly with warm water and allow it to air dry before storing.

3. Conservazione

Store the mop in its provided storage tray to prevent the pads from touching the floor and to catch any residual drips. Ensure the mop is fully charged before storing for extended periods.

BISSELL Spinwave mop stored on its tray

Image: The BISSELL Spinwave mop resting on its dedicated storage tray, designed for convenient and tidy storage.

Risoluzione dei problemi

Specifiche

MarcaBisella
Nome del modelloEsperto di pavimenti duri senza fili SpinWave
Numero di modello23159
Fonte di alimentazioneAlimentato a batteria (ioni di litio da 18 V)
Peso dell'articolo9.5 libbre
Raccomandazione di superficiePavimento duro
Componenti inclusiBattery, 4 Mop Pads, 2 Trial-Size Cleaning Solutions
Codice UPC011120260540

Garanzia e supporto

BISSELL offers various protection plans for your Spinwave Cordless Hard Floor Expert Spin Mop:

For further assistance, product registration, or to purchase accessories, please visit the official BISSELL website or contact customer support. The manufacturer is BISSELL.

Documenti correlati - 23159

Preview Istruzioni per l'uso del Bissell SpinWave Expert 20393 | Manuale del pulitore per pavimenti duri
Istruzioni ufficiali per l'uso del pulitore rotante con filo Bissell SpinWave Expert Hard Floor Expert, modello 20393. Scopri come testare lo spruzzo, controllare e riempire il serbatoio e pulire l'ugello dello spruzzo.
Preview Manuale utente BISSELL CrossWave Cordless Max 2596 Series
Manuale utente completo per la serie BISSELL CrossWave Cordless Max 2596, che copre installazione, utilizzo, manutenzione, istruzioni di sicurezza e risoluzione dei problemi. Include il prodotto. view, assemblaggio, formule di pulizia, ricarica, riempimento, pulizia del pavimento, svuotamento del serbatoio, utilizzo della stazione di ricarica, stoccaggio e smaltimento delle batterie.
Preview Guida utente BISSELL CrossWave Cordless Max 2590 Series
Manuale utente completo per la serie BISSELL CrossWave Cordless Max 2590, che copre la configurazione, il funzionamento, la manutenzione, le istruzioni di sicurezza e la risoluzione dei problemi di questo pulitore per superfici dure senza fili.
Preview Manuale utente del pulitore multisuperficie per pavimenti duri BISSELL CROSSWAVE HF3 CORDLESS
Questo manuale utente fornisce informazioni essenziali per il funzionamento e la manutenzione del pulitore multisuperficie per pavimenti duri BISSELL CROSSWAVE HF3 CORDLESS, modello 3598F. Include istruzioni di sicurezza, istruzioni di montaggio, guide all'uso e suggerimenti per la risoluzione dei problemi.
Preview Guida utente BISSELL SpinWave
Una guida utente completa per il pulitore per pavimenti duri BISSELL SpinWave, che copre montaggio, funzionamento, manutenzione e risoluzione dei problemi.
Preview Risoluzione dei problemi del mocio a vapore Bissell PowerFresh: soluzioni per perdite e mancanza di corrente
Risolvi i problemi di perdite e mancanza di corrente con il tuo mocio a vapore Bissell PowerFresh. Questa guida offre istruzioni chiare e dettagliate per la risoluzione dei problemi più comuni.