1. Introduzione
This manual provides essential information for the safe and effective use of your SHARP KC-H50-W Humidifying Air Purifier. This appliance combines air purification with humidification, utilizing Plasmacluster 7000 technology to improve indoor air quality. Please read this manual thoroughly before operating the unit and retain it for future reference.
2. Informazioni sulla sicurezza
Per garantire un funzionamento sicuro, seguire sempre queste precauzioni di base:
- Always connect the unit to a 100V AC power supply. Do not use with other voltages.
- Non bloccare le prese d'aria di aspirazione o di scarico.
- Keep the unit away from water and moisture. Do not operate with wet hands.
- Non smontare, riparare o modificare l'unità autonomamente. Contattare il personale di assistenza autorizzato.
- Ensure the water tank is filled with clean tap water only. Do not add chemicals or essential oils.
- Scollegare l'unità prima di pulirla o di effettuare qualsiasi intervento di manutenzione.
3. Prodotto finitoview e identificazione delle parti
Familiarize yourself with the main components of your air purifier.
Figura 3.1: Fronte view of the SHARP KC-H50-W Humidifying Air Purifier.
Componenti chiave:
- Pannello di controllo: Located on the top, for operating modes and settings.
- Uscita aria: Top front, releases purified and humidified air.
- Presa d'aria: Rear panel, draws in room air.
- Serbatoio dell'acqua: Removable tank for humidification.
- Filtri: Pre-filter, Deodorizing filter, HEPA filter (located behind the rear panel).
- Sensori: Detects odor, humidity, temperature, and light levels.
- Casters with Stopper: For easy movement and stable placement.
Figure 3.2: Dimensions of the SHARP KC-H50-W (Height: 615mm) for scale.
4. Impostazione
Seguire questi passaggi per la configurazione iniziale:
- Disimballaggio: Carefully remove the unit from its packaging. Retain packaging for future transport or storage.
- Installazione del filtro: Open the rear panel and ensure all filters (Pre-filter, Deodorizing filter, HEPA filter) are correctly installed and any protective plastic wrapping is removed. Close the panel securely.
- Riempire il serbatoio dell'acqua: Remove the water tank from the side of the unit. Unscrew the cap, fill with clean tap water up to the MAX line, and securely replace the cap. Reinsert the tank into the unit.
- Posizionamento: Place the unit on a flat, stable surface. Ensure there is adequate space around the unit (at least 20 cm from walls or furniture) for proper airflow. The casters allow for easy positioning.
- Collegamento elettrico: Collegare il cavo di alimentazione a una presa elettrica standard da 100 V CA.
5. Istruzioni per l'uso
The control panel allows you to select various operating modes and monitor air quality.
5.1 Accensione/spegnimento
- Premere il tasto Pulsante di accensione to turn the unit ON or OFF.
Modalità operative 5.2
- Modalità automatica: The unit automatically adjusts fan speed and humidification based on the detected air conditions (odor, humidity, temperature, light).
- Modalità di sospensione silenziosa: When ambient light is low (e.g., lights are turned off), the unit automatically switches to a quiet operation. It will also quietly humidify if dryness is detected, ensuring a comfortable environment for sleep.
- Modalità polline: Increases sensor sensitivity to quickly detect pollen and operates at a stronger fan speed to remove it from the air.
5.3 Display e indicatori
- Display digitale: Shows current room temperature, humidity (in 1% increments), and an estimated daily electricity cost (in 1 yen increments).
- Clean Monitor: An indicator light changes color to show the overall air cleanliness status.
- High/Low Temperature & Humidity Monitoring: The unit provides alerts (sound and light) if room temperature or humidity levels become excessively high or low.
6. Manutenzione
Una manutenzione regolare garantisce prestazioni ottimali e longevità del purificatore d'aria.
6.1 Water Tank and Humidifying Tray
- Quotidiano: Refill the water tank with fresh tap water. The tank is designed with a handle for easy carrying and can stand upright during refilling.
- Settimanale: Clean the water tank and humidifying tray to prevent slime and odor buildup. The integrated Ag+ Ion Cartridge helps suppress these issues, but regular cleaning is still recommended.
6.2 Filtri
Figure 6.1: The three-stage filter system effectively captures dust, odors, and fine particles.
- Pre filtro: Clean regularly (e.g., every two weeks) by vacuuming or washing with water.
- Deodorizing Filter & HEPA Filter: These filters are not washable. Replace them according to the manufacturer's recommendations or when performance noticeably declines. Refer to the product specifications for filter lifespan.
6.3 Pulizia esterna
- Wipe the exterior of the unit with a soft, dry cloth. For stubborn dirt, use a damp panno e un detergente delicato, quindi asciugare.
7. Risoluzione Dei Problemi
Se riscontri problemi con il tuo purificatore d'aria, fai riferimento ai seguenti problemi comuni e alle relative soluzioni:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| L'unità non si accende | Cavo di alimentazione scollegato; Alimentazione spentatage; Malfunzionamento dell'unità | Check power cord connection; Check household circuit breaker; Contact customer support |
| Nessuna umidificazione | Water tank empty; Humidifying filter dirty; Humidification function off | Refill water tank; Clean/replace humidifying filter; Activate humidification mode |
| Odore insolito | Filters dirty; Water tank/tray dirty; New unit odor | Clean/replace filters; Clean water tank/tray; Odor should dissipate after initial use |
| Air purification ineffective | Filters dirty or clogged; Unit placed in an unsuitable location | Clean/replace filters; Ensure proper placement with adequate airflow |
Se il problema persiste dopo aver provato queste soluzioni, contattare l'assistenza clienti SHARP.
8. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Numero di modello | KC-H50-W |
| Marca | AFFILATO |
| Dimensioni (L x P x A) | Dimensioni: 39.9 x 23 x 61.5 cm |
| Peso | Circa 7.7 kg |
| Alimentazione elettrica | 100 V CA |
| Consumo energetico (max) | Circa. 54 W. |
| Lunghezza del cavo di alimentazione | 1.8 metri |
| Metodo di umidificazione | Evaporation Type |
| Humidification Capacity (Max) | 500 ml / h |
| Capacità del serbatoio dell'acqua | ca. 2.5 litri |
| Applicable Humidifying Air Purifying Area | Approx. 14m² (~8.5 tatami for wooden rooms) |
| Applicable Humidification Area (Prefab Western Room) | ~14 tatami (23m²) |
| Applicable Humidification Area (Wooden Japanese Room) | ~8.5 tatami (14m²) |
| Air Purification Time (for 8 tatami) | 17 minuti |
| Plasmacluster Ion Density | 7000 Norma |
| Sensori | Odor, Humidity, Temperature, Light |
9. Garanzia e supporto
Your SHARP KC-H50-W Humidifying Air Purifier comes with a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions, including warranty period and coverage.
For technical support, service, or to purchase replacement parts (such as filters or the Ag+ Ion Cartridge), please contact SHARP customer service. Contact information can typically be found on the SHARP official websul sito o sulla confezione del prodotto.
