Prodotto finitoview
This CURT Class 3 trailer hitch is designed for the Mercedes-Benz V-Class 220d and Metris W447 models, manufactured from 2015 to the present. It provides a 2-inch (50.8mm) receiver tube, suitable for attaching various towing accessories such as cargo carriers and bicycle racks. The hitch is constructed for durability and includes the necessary bolts for installation.
Nota: Hitch pin, mount, wiring, and coupler are not included with this product and must be purchased separately.
Informazioni sulla sicurezza
Always adhere to the vehicle manufacturer's towing capacity and the hitch's specified weight ratings. Overloading can lead to serious injury or damage. Ensure all connections are secure before towing. Regularly inspect the hitch for any signs of wear, damage, or corrosion. Do not modify the hitch in any way. Always wear appropriate safety gear during installation and maintenance.
Contenuto della confezione
- CURT Trailer Hitch (Model curt-13276)
- Installation Hardware Set (necessary bolts)
Specifiche
| Numero di modello | curt-13276 |
| Compatibilità del veicolo | Mercedes-Benz V-Class 220d / Metris W447 (2015-Present) |
| Hitch Class | Classe 3 |
| Capacità di traino | Circa 2720 kg (6000 libbre) |
| Capacità di carico verticale | Circa 400 kg (880 libbre) |
| Receiver Tube Size | 2 pollici / 50.8 mm |
| Ground Clearance (Hitch Receiver Insertion Port) | Bottom end: 30 cm, Top end: 35 cm |
| Dimensioni del corpo principale (L x P x A) | Circa 37.6 x 111.9 x 29.8 cm |
| Peso corporeo principale | Circa 22.2 kg |
Configurazione e installazione
Installation of the CURT trailer hitch requires mechanical aptitude and appropriate tools. It is recommended to have the installation performed by a qualified professional. Refer to the vehicle's service manual for specific instructions regarding bumper removal or frame access, if necessary. Always ensure the vehicle is securely supported before working underneath.
- Preparazione: Park the vehicle on a level surface and engage the parking brake. If required, lift the vehicle using a hoist or jack stands for safe access to the undercarriage.
- Access Vehicle Frame: Depending on your vehicle model, it may be necessary to remove or temporarily lower the exhaust, trim panels, or bumper to access the frame mounting points.
- Posizionare il gancio: Carefully lift the trailer hitch into position, aligning the mounting holes on the hitch with the corresponding holes on the vehicle's frame.
- Sicuro con l'hardware: Insert the provided bolts and hardware through the aligned holes. Hand-tighten all fasteners to ensure proper alignment.
- Serraggio finale: Refer to the specific torque specifications provided in the hitch's included instruction sheet (not provided in this general manual) to tighten all bolts securely. Ensure all connections are firm.
- Rimontare: Reinstall any components that were removed or lowered during the installation process.
Immagine: Frontale view of the CURT trailer hitch, showing the main receiver tube and mounting arms.
Image: Diagram indicating the 2-inch receiver tube size with directional arrows.
Immagine: Posteriore view of a Mercedes-Benz V-Class with the CURT trailer hitch installed, showing ground clearance measurements of 30cm and 35cm for the hitch receiver.
Immagine: Posteriore completa view of a Mercedes-Benz V-Class with the CURT trailer hitch discreetly installed below the bumper.
Immagine: Parte posteriore angolata view of a Mercedes-Benz V-Class, highlighting the installed CURT trailer hitch.
Istruzioni per l'uso
Once the CURT trailer hitch is securely installed, it is ready for use with compatible hitch-mounted accessories.
- Accessori di fissaggio: Insert your desired hitch-mounted accessory (e.g., cargo carrier, bike rack) into the 2-inch receiver tube.
- Secure with Pin and Clip: Align the accessory's pinhole with the hitch receiver's pinhole. Insert a hitch pin and secure it with a clip (not included) to prevent the accessory from detaching.
- Verifica connessione: Before driving, ensure the accessory is firmly seated and secured, with no excessive movement or play.
- Distribuzione del peso: Distribute the load evenly on cargo carriers to maintain vehicle stability. Do not exceed the hitch's vertical load capacity or the accessory's weight limit.
Manutenzione
Una corretta manutenzione garantirà la longevità e il funzionamento sicuro del gancio di traino CURT.
- Ispezione regolare: Periodically check all bolts and fasteners for tightness. Retighten to specified torque values if necessary.
- Protezione dalla corrosione: Keep the hitch clean and free of dirt, salt, and debris. Apply a rust-inhibiting paint or coating to any exposed metal surfaces to prevent corrosion, especially in harsh environments.
- Receiver Tube Care: Keep the inside of the receiver tube clean to ensure easy insertion of accessories. Lubricate with a light grease if needed.
Risoluzione dei problemi
If you encounter issues with your CURT trailer hitch, consider the following common solutions:
- Loose Hitch: If the hitch feels loose after installation, re-check all mounting bolts and ensure they are tightened to the manufacturer's specifications.
- Difficoltà nell'inserimento degli accessori: Ensure the receiver tube is clean and free of obstructions. Check for any deformation of the receiver tube or the accessory shank.
- Rumori insoliti: Investigate any rattling or clunking sounds during operation. This may indicate loose connections or an improperly secured accessory.
- Reduced Towing Performance: Verify that the total weight of your trailer or cargo does not exceed the hitch's or your vehicle's rated capacity.
Garanzia e supporto
This CURT trailer hitch comes with a manufacturer's warranty. For specific warranty terms, conditions, and duration, please refer to the documentation included with your product or contact CURT customer support directly. For technical assistance or compatibility inquiries, please visit the official CURT websito o contattare il loro servizio clienti.
Produttore: CORTO
Numero modello: curt-13276
ASIN: B0765SWPC1
