Introduzione
This manual provides detailed instructions for the safe and effective use of your Bissell Little Green Original ProHeat Machine. This portable carpet and upholstery steam cleaner is designed to tackle embedded dirt and stains, utilizing Heatwave Technology to maintain consistent water temperature for optimal cleaning performance.
Le caratteristiche principali includono:
- Heatwave Technology: Maintains consistent water temperature while cleaning.
- Strumento Scala: Specifically designed to remove embedded dirt and stains from stairs and hard-to-reach corners.
- Trial Size Formulas: Includes trial sizes of Spot and Stain Formula and Oxygen Boost formula for immediate use.
Impostare
Before first use, ensure all components are present and undamaged. Refer to the included quick start guide for visual assembly instructions.
1. Riempimento del serbatoio dell'acqua pulita
Locate the clean water tank (typically on the right side of the machine). Remove the tank by lifting its handle. Unscrew the cap and fill with warm tap water up to the designated 'WATER' fill line. For optimal cleaning, add the recommended amount of Bissell cleaning formula up to the 'FORMULA' line. Replace the cap securely and reinsert the tank into the machine, ensuring it clicks into place.
2. Fissaggio degli strumenti di pulizia
Connect the desired cleaning tool (e.g., the stair tool or specialized tool) to the end of the flexible hose. Ensure a secure connection.
3. Collegamento elettrico
Unwind the power cord from its storage wraps and plug it into a grounded electrical outlet.
Image: The Bissell Little Green Original ProHeat Machine fully assembled, ready for use.
Istruzioni per l'uso
1. Accensione
Press the red power button located on the top of the machine to turn it on.
2. Applying Cleaning Solution
Hold the cleaning tool directly over the stained area. Press the spray trigger on the tool handle to dispense the cleaning solution onto the surface. Allow the solution to penetrate the stain for a few minutes before scrubbing.
Image: The cleaning tool effectively removing a tough spill from carpet.
3. Scrubbing and Suction
Gently scrub the stained area with the brush on the cleaning tool. Apply downward pressure and pull the tool slowly over the wet area to suction up the dirty solution. Repeat this process until the stain is removed and the suctioned water appears clean.
Image: A user demonstrating portable carpet cleaning with the Bissell Little Green machine.
4. Heatwave Technology
The integrated Heatwave Technology helps maintain the water temperature throughout the cleaning process, enhancing the effectiveness of the cleaning solution.
Image: Visual representation of the Heatwave Technology within the cleaner's tank.
5. Specialized Tools
Utilize the specialized tools for different cleaning needs. The stair tool is ideal for stairs and tight corners, while other attachments can be used for pet hair or crevices.
Image: Various specialized tools included with the cleaner for versatile cleaning tasks.
Manutenzione
1. Svuotamento del serbatoio dell'acqua sporca
After each use, or when the dirty water reaches the 'FULL' line, remove the dirty water tank. Unlatch the lid and carefully pour out the dirty water. The tank is designed for easy disassembly and cleaning.
2. Cleaning the Clean Water Tank
Rinse the clean water tank thoroughly with warm water after each use to prevent residue buildup. Allow it to air dry completely before storing.
3. Tool Cleaning
Rinse all cleaning tools under running water to remove any dirt or debris. Ensure they are dry before storing.
4. Conservazione
Wrap the power cord neatly around the designated cord wraps. Store the hose and tools securely on the machine. Store the unit in a dry, protected area.
Image: The compact design allows for easy storage in small spaces.
Risoluzione dei problemi
If your machine is not operating as expected, please check the following common issues:
- Nessun potere: Ensure the power cord is securely plugged into a working electrical outlet and the power button is pressed.
- Nessuno spruzzo: Check if the clean water tank is filled and properly seated. Ensure the spray trigger on the tool is being pressed.
- Scarsa aspirazione: Verify that both the clean and dirty water tanks are correctly installed. Check the hose and tools for any blockages.
For more detailed troubleshooting, please refer to the complete user manual or contact Bissell customer support.
Specifiche
- Marca: Bisella
- Modello: 2513E (Original ProHeat)
- Peso dell'articolo: 8.58 libbre
- Dimensioni del prodotto: 6.5"P x 12"L x 14.5"A
- Fonte di energia: Hand-Operated
- Capacità: 4155.82 pollici cubi
- Tecnologia: Heatwave Technology
Garanzia e supporto
For warranty information, product registration, or customer support, please visit the official Bissell website or contact their customer service line. Keep your purchase receipt for warranty claims.
