1. Introduzione
The Goobay 45241 Soldering Aid is a versatile tool designed to assist with delicate soldering and assembly tasks. It features a magnifying glass with LED illumination, flexible gooseneck crocodile clips, and an integrated soldering iron holder, providing stability and enhanced visibility for precision work.
Image 1.1: The Goobay 45241 Soldering Aid unit, showcasing its main components including the magnifying glass, LED lamp, gooseneck arms, and base with accessories.
2. Istruzioni di sicurezza
Si prega di leggere attentamente tutte le istruzioni di sicurezza prima di utilizzare questo prodotto. Il mancato rispetto di queste istruzioni può causare lesioni o danni al prodotto.
- Always use the soldering aid on a stable, non-slip surface.
- Tenere il dispositivo lontano dall'acqua e da altri liquidi.
- Do not look directly into the LED light for extended periods to avoid eye strain.
- Ensure proper ventilation when soldering, as fumes can be harmful.
- Tenere fuori dalla portata dei bambini.
- Disconnect power when not in use or when cleaning.
- Utilizzare solo l'adattatore di alimentazione fornito o le batterie consigliate.
3. Contenuto della confezione
Verifica che tutti gli articoli elencati di seguito siano presenti nel tuo pacco:
- Goobay 45241 Soldering Aid main unit (base with magnifying glass, LED lamp, gooseneck arms, crocodile clips)
- Supporto per saldatore
- Spugna per la pulizia
- Cleaning wool (brass wire)
- Soldering resin (flux)
- Adattatore di alimentazione CA.
Immagine 3.1: Passoview of the soldering aid's features, including 16 LEDs, 3x magnification, soldering iron holder, sponge, cleaning wool, and flux.
Immagine 3.2: Dettagliata view of the included accessories: brass tip cleaner, soldering resin (rosin), and cleaning sponge.
4. Assemblaggio
The Goobay 45241 Soldering Aid comes largely pre-assembled. Follow these steps for final setup:
- Disimballare tutti i componenti dalla confezione.
- Place the main unit on a stable, flat work surface. The robust metal base ensures stability.
- Ensure the gooseneck arms for the magnifying glass and crocodile clips are securely attached to the base. Adjust their positions as needed.
- Insert the soldering iron holder into its designated slot on the base.
- Place the cleaning sponge, cleaning wool, and soldering resin into their respective compartments on the base.
Image 4.1: The soldering aid with key dimensions, highlighting the robust metal base for secure positioning during work.
5. Opzioni di alimentazione
The LED illumination can be powered either by batteries or via the included AC power adapter.
5.1. Funzionamento a batteria
For portable use, the LED light can be powered by 4x AA batteries (not included).
- Individuare il vano batteria sull'unità principale.
- Aprire il coperchio del vano batterie.
- Inserire 4 batterie AA, assicurandosi della corretta polarità (+/-).
- Chiudere saldamente il coperchio del vano batterie.
Image 5.1: The removable battery compartment, designed for 4x AA batteries, allowing for flexible power options.
5.2. Adattatore di alimentazione CA
For continuous operation, use the included AC power adapter.
- Connect the DC plug of the power adapter to the power input port on the main unit.
- Collegare l'adattatore CA a una presa a muro adatta.
Image 5.2: Details of the direct power supply via the included AC adapter, showing Europlug (Type C, CEE 7/16) and DC plug specifications.
6. Istruzioni per l'uso
This section details how to use the various features of your Goobay 45241 Soldering Aid.
Image 6.1: Labeled diagram identifying key components: Magnifying glass, LED ring light, flexible goosenecks, On/Off switch, soldering iron holder, crocodile clips, cleaning wool, soldering resin holder, flux, and cleaning sponge.
6.1. Using the Magnifying Glass and LED Light
- Position the magnifying glass gooseneck to bring the lens over your workpiece.
- Flip the ON/OFF switch located on the main unit to activate the LED ring light.
- Adjust the angle and distance of the magnifying glass for optimal viewing and illumination of your work area. The 3x magnification and 16 LEDs provide clear visibility for fine details.
Immagine 6.2: Primo piano view of the magnifying glass, detailing the LED ring light with 16 SMD LEDs, cold white light color (6500 K), 280 lm luminous flux, and the 90 mm diameter glass lens with 3x magnification (8 diopters).
6.2. Utilizing the Crocodile Clips
- Use the flexible gooseneck arms of the crocodile clips to securely hold small components or circuit boards in place.
- Adjust the angle and position of the clips to achieve the desired orientation for your workpiece. The strong clips prevent trembling or wobbling.
Image 6.3: The soldering aid in use, holding a circuit board, demonstrating its function as a practical helper for hands-free operation.
Image 6.4: The soldering aid providing a helping hand for intricate soldering and crafting tasks, shown with close-ups of fine component work and wire soldering.
6.3. Soldering Iron Holder and Cleaning
- Place your soldering iron in the integrated holder when not actively soldering to keep it secure and prevent accidental burns.
- Use the cleaning wool (brass wire) to effectively remove solder residue from the soldering tip.
- Dampen the cleaning sponge with water and use it to wipe the soldering tip clean.
- Apply a small amount of soldering resin (flux) to the soldering tip or workpiece to improve solder flow and joint quality.
7. Manutenzione
Regular maintenance ensures the longevity and optimal performance of your soldering aid.
- Pulizia della lente: Gently wipe the magnifying glass lens with a soft, lint-free cloth. For stubborn smudges, use a lens cleaning solution. Avoid abrasive cleaners.
- Pulizia della base: Wipe the base and plastic components with a damp stoffa. Non immergere l'unità in acqua.
- Cura della spugna: Tenere la spugna per la pulizia damp during use. Replace it when it becomes worn or heavily soiled.
- Sostituzione della batteria: If using batteries, replace all four AA batteries simultaneously when the LED light dims.
- Magazzinaggio: Store the soldering aid in a clean, dry environment when not in use.
8. Risoluzione Dei Problemi
If you encounter issues with your Goobay 45241 Soldering Aid, refer to the following common problems and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce LED non si accende. | No power, batteries drained, or AC adapter not connected. | Check if the AC adapter is properly connected or replace batteries. Ensure the ON/OFF switch is in the 'ON' position. |
| La luce del LED è fioca. | Batteria scarica. | Replace batteries or use the AC power adapter. |
| L'unità è instabile. | Not on a flat surface, or components not properly seated. | Ensure the unit is on a flat, stable surface. Check that all goosenecks and accessories are securely tightened. |
| Lente d'ingrandimento view è sfocato. | Lens is dirty or not properly focused. | Clean the lens with a soft cloth. Adjust the distance of the lens from your workpiece. |
9. Specifiche
| Modello | Goobay 45241 |
| Peso dell'articolo | 1.2 chilogrammi |
| Forza di ingrandimento | 3 Diopters (3x) |
| Diametro della lente | 90 millimetri |
| Materiale della lente | Plastica, acrilico |
| LED | 16 LED SMD |
| Colore chiaro | Bianco freddo |
| Temperatura del colore | 6500 mila |
| Flusso luminoso | 280 lumen |
| Collo d'oca Lamp Lunghezza | 265 millimetri |
| Gooseneck Crocodile Clamp Lunghezza | 250 millimetri |
| Dimensioni base (L x P) | Dimensioni: 190 mm x 170 mm |
| Altezza totale | 525 millimetri |
| Alimentazione elettrica | 4x AA Batteries (not included) or AC Adapter |
| Uscita adattatore CA | 5.9 V, 0.5 A, 2.95 W |
| Produttore | Wentronic |
10. Garanzia e supporto
The Goobay 45241 Soldering Aid comes with a Garanzia di 2 anni dalla data di acquisto. La presente garanzia copre i difetti di fabbricazione in condizioni di normale utilizzo.
For technical support, warranty claims, or further assistance, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty validation.
