Introduzione
The Intermec PB51 is a rugged, 4-inch direct thermal mobile receipt printer designed for demanding field service, route accounting, and point-of-service applications. It offers fast, reliable printing performance to enhance productivity for mobile workers.
This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your PB51 printer.
Figura 1: Fronte view of the Intermec PB51 mobile receipt printer. A receipt is partially ejected from the front slot, displaying "Transaction Receipt", "Transaction #: 4530902261009", "Customer #: 057-806-730", and "Date: 2/26/2009 Time: 12:08:43 PM". The printer features a dark gray casing with a blue button on the left side and the "Intermec PB51" logo on the top panel.
Impostare
1. Disimballaggio e ispezione
- Estrarre con cautela la stampante e tutti gli accessori dalla confezione.
- Verificare che tutti i componenti elencati nella bolla di accompagnamento siano presenti.
- Inspect the printer for any visible damage. If damage is found, contact your supplier immediately.
2. Installazione e ricarica della batteria
- Assicurarsi che la stampante sia spenta.
- Individuare il vano batteria sulla stampante.
- Insert the battery, ensuring proper alignment with the contacts.
- Chiudere bene il vano batterie.
- Connect the AC adapter to the printer and a power outlet. The battery indicator light will show charging status. Allow the battery to fully charge before first use.
3. Caricamento della carta termica
- Aprire il coperchio del vano carta.
- Insert the thermal paper roll with the print-side facing the print head.
- Pull a small amount of paper out past the print mechanism.
- Close the paper compartment cover firmly until it latches.
- The printer's paper sensors will detect the paper, minimizing lost transactions.
4. Connectivity Setup (Bluetooth / USB / Serial)
- Bluetooth: Turn on the printer and enable Bluetooth on your host device (e.g., smartphone, tablet, or computer). Cercare available devices and select the PB51. Pair using the default PIN (refer to the printer's display or documentation for the specific PIN).
- USB: Connect the printer to your host device using a standard USB cable. Install the necessary printer drivers on your host device if prompted.
- Seriale: Connect the printer to your host device using a serial cable. Configure the serial port settings (baud rate, data bits, parity, stop bits) on both the printer and the host device to match.
Istruzioni per l'uso
1. Accensione/Spegnimento
- Per accendere, tieni premuto il pulsante di accensione finché il display non si illumina.
- To power off, press and hold the power button until the display indicates shutdown, then release.
2. Stampa di una ricevuta
- Ensure the printer is powered on and connected to your host device.
- Open the application on your host device that generates receipts or invoices.
- Initiate the print command from your application. The PB51 is designed for 20-30% faster time-to-receipt printing.
- The printer will automatically feed and print the receipt.
- Tear off the receipt along the serrated edge.
3. Utilizzo dello schermo LCD
The standard LCD display provides important information about the printer's status, battery level, connectivity, and error messages. Use the navigation buttons (if present) to scroll through menu options and settings.
Manutenzione
1. Pulizia della testina di stampa
- Spegnere la stampante e scollegarla da qualsiasi fonte di alimentazione.
- Aprire lo scomparto della carta.
- Gently wipe the print head surface with a lint-free cloth damparricchito con alcol isopropilico.
- Lasciare asciugare completamente la testina di stampa prima di chiudere il coperchio e accendere la stampante.
- Perform this cleaning regularly, especially if print quality degrades.
2. Cura della batteria
- Per massimizzare la durata della batteria, evitare di scaricarla completamente frequentemente.
- Store the printer and battery in a cool, dry place when not in use for extended periods.
- Use only genuine Intermec replacement batteries.
3. Pulizia generale
Pulire l'esterno della stampante con un panno morbido eamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no liquid enters the printer's openings.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La stampante non si accende | Low or dead battery; faulty power adapter; loose battery connection. | Charge the battery; check power adapter connection; re-seat the battery. |
| Nessuna stampa in uscita | No paper; paper loaded incorrectly; connectivity issue; print head dirty. | Load paper correctly; check Bluetooth/USB/Serial connection; clean print head. |
| Qualità di stampa scadente | Dirty print head; incorrect paper type; low battery. | Clean print head; ensure thermal paper is used; charge battery. |
| Problemi di connettività | Incorrect pairing; driver issues; out of range. | Re-pair Bluetooth; reinstall drivers; move closer to host device. |
If the problem persists after attempting these solutions, please contact Intermec customer support.
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Nome del modello | PB51B33004100 |
| Tecnologia di stampa | Termico diretto |
| Uscita della stampante | Monocromo |
| Dimensione massima del supporto | 4 pollici |
| Tecnologia di connettività | USB, Serial, Bluetooth |
| Peso dell'articolo | 42 Ounces (approx. 2.63 lbs) |
| Dimensioni del pacco | 10.2 x 10 x 5 pollici |
| Tipo di controllore | Android (compatibile) |
| Produttore | Intermec |
Garanzia e supporto
Specific warranty information for the Intermec PB51 printer is not available in this document. Please refer to the warranty card included with your product or visit the official Intermec (now Honeywell) websito per termini e condizioni di garanzia dettagliati.
For technical support, service, or to purchase accessories, please contact your authorized Intermec/Honeywell dealer or visit their official support portal.
