1. Introduzione
This manual provides comprehensive instructions for the installation, operation, and maintenance of the BANNER ENGINEERING R58ECRGB1Q Photoelectric Sensor. This sensor is designed for industrial applications requiring precise object detection using a parallel sensing beam.
The R58ECRGB1Q features 1 NPN and 1 PNP output, bipolar operation, and a Euro 5-PIN Pigtail connector, accepting an input voltage di 10-30 V CC.
Figure 1: BANNER ENGINEERING R58ECRGB1Q Photoelectric Sensor. This image displays the sensor's black housing with a prominent yellow label. Visible features include control indicators such as "DO", "LO", "OFF", "ON", and "DYNAMIC", along with a "SWITCH POINT" scale from 1 to 8. A bright red sensing beam is emitted from the sensor's lens, indicating its active state. The sensor is shown in an operational context, positioned above a moving material, typical of an industrial automation setup.
2. Informazioni sulla sicurezza
Read all instructions carefully before installing or operating the sensor. Failure to follow these instructions may result in product damage, property damage, or serious injury.
- Prima di effettuare qualsiasi installazione o manutenzione, assicurarsi che l'alimentazione sia scollegata.
- Only qualified personnel should install and service this device.
- Non superare il volume di ingresso specificatotagGamma e (10-30 V CC).
- Protect the sensor from excessive vibration, shock, and extreme temperatures.
- Avoid direct exposure of the eyes to the emitted light beam.
3. Configurazione e installazione
3.1 Montaggio
Mount the R58ECRGB1Q sensor securely using appropriate hardware. Ensure the sensing beam path is clear and unobstructed for optimal performance. The sensor should be positioned to allow for proper alignment with the target object.
3.2 Cablaggio
The sensor features a Euro 5-PIN Pigtail connector. Refer to the following general wiring guide. Consult specific product documentation or wiring diagrams provided with your sensor for exact pin assignments, as configurations may vary.
- Perno 1: +VDC (10-30 VDC)
- Perno 2: Uscita NPN
- Perno 3: 0 VDC (Ground)
- Perno 4: Uscita PNP
- Perno 5: Not Used / Function Input (Refer to specific model documentation)
Assicurarsi che tutti i collegamenti siano sicuri e isolati per evitare cortocircuiti.
4. Funzionamento e configurazione
The R58ECRGB1Q sensor includes "Dynamic Teach" and "Static Teach" functions for precise configuration of sensing thresholds.
4.1 Dynamic Teach
Dynamic Teach is used for teaching the sensor to detect variations in a moving target or background. This method is ideal for applications where the target and background are similar or where the target is moving.
- Hold DYNAMIC: Press and hold the "DYNAMIC" button on the sensor.
- Present Conditions: While holding the button, pass the target object(s) through the sensing beam, or present the range of conditions you wish the sensor to learn.
- LEDs Flash: Observe the indicator LEDs; they will flash during the teaching process.
- Release DYNAMIC: Release the "DYNAMIC" button once the desired conditions have been presented. The sensor will store the learned parameters.
4.2 Static Teach
Static Teach is used for teaching the sensor distinct ON and OFF conditions, typically for stationary targets or clear differentiation between target and background.
- Hold STATIC: Press and hold the "STATIC" button (or equivalent teach button, if "STATIC" is not explicitly labeled, refer to the "SWITCH POINT" area for teach button). Hold until the LEDs begin to flash.
- Present ON Condition: Present the object or condition that should trigger an "ON" state. Click the "STATIC" button once to register this condition.
- Present OFF Condition: Present the object or condition that should trigger an "OFF" state (e.g., no object, background). Click the "STATIC" button once to register this condition.
- The sensor will then be configured based on these two distinct states.
4.3 Indicators and Controls
The sensor features several indicators and controls for status monitoring and adjustment:
- DO (Dark Operate) / LO (Light Operate): Indicates the output state based on light or dark conditions.
- SPENTO ACCESO: General status indicators for the sensor's output.
- DINAMICO: Button/indicator for Dynamic Teach mode.
- SWITCH POINT (1-8): A multi-position switch or indicator for setting sensitivity or teach points. Refer to specific product diagrams for exact functionality.
5. Manutenzione
The R58ECRGB1Q sensor is designed for minimal maintenance. Regular inspection and cleaning are recommended to ensure optimal performance.
- Pulizia: Periodically clean the sensor lens and housing with a soft, damp panno. Evitare detergenti abrasivi o solventi che potrebbero danneggiare il materiale.
- Ispezione: Check wiring and connections for any signs of wear, damage, or corrosion. Ensure mounting hardware remains secure.
- Ambiente: Assicurarsi che l'ambiente operativo rimanga entro gli intervalli di temperatura e umidità specificati.
6. Risoluzione Dei Problemi
Se il sensore non funziona come previsto, prendere in considerazione i seguenti problemi comuni e le relative soluzioni:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il sensore non si accende. | Nessuna alimentazione; cablaggio errato; alimentatore difettoso. | Verify power connections (10-30 VDC); check wiring for shorts or breaks; test power supply. |
| Il sensore non rileva gli oggetti. | Misalignment; dirty lens; incorrect teach setting; object too small/far. | Re-align sensor and target; clean lens; re-perform Dynamic or Static Teach; ensure object is within sensing range. |
| Erratic or inconsistent detection. | Environmental interference (dust, steam); unstable mounting; reflective surfaces. | Clean environment; secure mounting; adjust sensor angle or use retroreflective tape if applicable. |
| Output always ON or OFF. | Incorrect teach setting; sensor damaged. | Re-perform teach procedure; if problem persists, sensor may require replacement. |
If troubleshooting steps do not resolve the issue, contact BANNER ENGINEERING technical support.
7. Specifiche tecniche
| Parametro | Valore |
|---|---|
| Numero di modello | R58ECRGB1Q |
| Numero di parte | R58ECRGB1Q |
| Marca | INGEGNERIA BANNER |
| Produttore | INGEGNERIA BANNER |
| Ingresso volumetage | 10-30 VCC |
| Risultati | 1 NPN, 1 PNP, Bipolar |
| Tipo di connettore | Euro 5-PIN Pigtail |
| Tipo di rilevamento | Parallel Sensing Beam, Photoelectric |
| Materiale | Rame |
| Dimensioni imballo articolo (L x P x A) | 3.96 x 2.04 x 2.04 pollici |
| Peso del pacco | 2.2 libbre |
| Data prima disponibilità | 23 giugno 2013 |
8. Informazioni sulla garanzia
BANNER ENGINEERING warrants its products against defects in materials and workmanship for a period specified in their standard warranty terms. This warranty typically covers repair or replacement of defective products. It does not cover damage resulting from improper installation, misuse, abuse, or unauthorized modifications.
For detailed warranty terms and conditions, please refer to the official BANNER ENGINEERING websito o contattare il loro servizio clienti.
9. Assistenza clienti
For technical assistance, product inquiries, or service requests, please contact BANNER ENGINEERING customer support:
- Websito: www.bannerengineering.com
- Telefono: Fare riferimento al websito per i numeri di contatto regionali.
- E-mail: Fare riferimento al websito per gli indirizzi email di supporto.
When contacting support, please have your product model number (R58ECRGB1Q) and a detailed description of the issue ready.
