1. Introduzione
This user manual provides essential information for the proper installation, operation, and maintenance of the BANNER ENGINEERING SM31R MINI-Beam Photoelectric Sensor. The SM31R is a compact, high-performance receiver designed for industrial sensing applications, featuring a 2-meter cable, 10-30 VDC input, and bipolar 1 NPN / 1 PNP output with a 3-meter range. Please read this manual thoroughly before using the product to ensure safe and efficient operation.
2. Informazioni sulla sicurezza
Osservare sempre le seguenti precauzioni di sicurezza per prevenire lesioni personali e danni all'apparecchiatura:
- Scollegare l'alimentazione: Always disconnect power to the device before performing any installation, wiring, or maintenance procedures.
- Personale qualificato: Installation and wiring should only be performed by qualified personnel familiar with electrical wiring practices and local codes.
- Volume di eserciziotage: Garantire l'alimentazione voltage matches the sensor's specified input range (10-30 VDC).
- Condizioni ambientali: Non esporre il sensore a condizioni al di fuori degli intervalli di temperatura e umidità di esercizio specificati.
- Uso corretto: Use the sensor only for its intended purpose as a photoelectric sensing device.
3. Prodotto finitoview
The BANNER ENGINEERING SM31R is a robust MINI-Beam photoelectric receiver. Its compact design and versatile output options make it suitable for various industrial automation tasks.
Caratteristiche principali:
- Compact MINI-Beam design
- 2-meter integrated cable
- Ingresso ampio volumetagIntervallo: 10-30 V CC
- Bipolar output: 1 NPN / 1 PNP
- Detection range up to 3 meters
Componenti del prodotto:
Figura 3.1: generale view of the BANNER ENGINEERING SM31R MINI-Beam Photoelectric Sensor, showing its compact yellow housing and attached 2-meter gray cable.
Figura 3.2: dettagliata view of the SM31R sensor's label, indicating the wiring color code for power input and output signals (White: Sink, Blue: DC Common, Black: Source, Brown: +10 to 30Vdc).
4. Configurazione e installazione
4.1 Montaggio
The SM31R sensor is designed for easy mounting using its integrated threaded barrel. Secure the sensor firmly in the desired position, ensuring it has a clear line of sight to the corresponding emitter (if applicable for through-beam mode) or the target object (for diffuse mode).
- Assicurarsi che la superficie di montaggio sia stabile e priva di vibrazioni eccessive.
- Position the sensor to avoid direct sunlight or other strong light sources that could interfere with its operation.
4.2 Cablaggio
The SM31R comes with a 2-meter cable. Refer to the wiring diagram on the sensor label (Figure 3.2) and the table below for correct connections. Always ensure power is disconnected before wiring.
| Colore del filo | Funzione | Descrizione |
|---|---|---|
| Marrone | Ingresso alimentazione (+) | Da +10 a 30 VCC |
| Blu | DC Common (-) | Ground / 0 VDC |
| Bianco | Output 1 (NPN) | Sink output, 150mA max |
| Nero | Output 2 (PNP) | Source output, 150mA max |
Connect the sensor outputs to your control system (PLC, relay, etc.) according to your application's requirements. The SM31R provides both NPN (sink) and PNP (source) outputs simultaneously.
5. Istruzioni per l'uso
Once properly installed and wired, the SM31R sensor operates automatically. It functions as a receiver in a through-beam setup or as a diffuse sensor, detecting objects within its 3-meter range.
5.1 Accensione
Apply 10-30 VDC power to the sensor. The sensor will typically have an indicator LED (if present) to confirm power and output status.
5.2 Rilevamento
When an object enters the sensor's detection field (up to 3 meters), the output state will change according to its configuration (light operate or dark operate, depending on the specific model and setup). The NPN and PNP outputs will switch simultaneously.
5.3 Alignment (for Through-Beam applications)
For through-beam applications, ensure the SM31R receiver is perfectly aligned with its corresponding emitter. Most Banner Engineering sensors have alignment indicators (LEDs) to assist with this process. Maximize the signal strength for reliable operation.
6. Manutenzione
The BANNER ENGINEERING SM31R sensor is designed for minimal maintenance. However, regular inspection and cleaning can prolong its lifespan and ensure consistent performance.
- Pulizia: Periodically clean the sensor lens and housing with a soft, damp cloth. Do not use abrasive cleaners or solvents that could damage the plastic.
- Ispezione: Regularly check the cable for any signs of damage, fraying, or wear. Ensure all connections are secure.
- Controllo ambientale: Verify that the operating environment remains within the sensor's specified limits (temperature, humidity, presence of corrosive substances).
7. Risoluzione Dei Problemi
If the SM31R sensor is not functioning as expected, refer to the following common issues and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il sensore non si accende | No power supply; Incorrect wiring; Power supply voltage fuori portata. | Check power connections (Brown to +V, Blue to 0V); Verify power supply is 10-30 VDC; Check for blown fuses or tripped breakers. |
| Il sensore non rileva gli oggetti | Misalignment (through-beam); Lens dirty; Object too far/close; Incorrect sensing mode; Damaged sensor. | Re-align emitter/receiver; Clean sensor lens; Verify object is within 3m range; Check sensor type (diffuse/through-beam); Replace sensor if damaged. |
| Erratic or inconsistent output | Interference from ambient light; Vibration; Loose wiring; Contaminated lens. | Shield sensor from strong light; Secure mounting; Check all wiring connections; Clean lens. |
| Output stuck ON or OFF | Short circuit in wiring; Overload on output; Internal sensor failure. | Inspect wiring for shorts; Ensure output current does not exceed 150mA; Contact Banner Engineering support if issue persists. |
8. Specifiche
Detailed technical specifications for the BANNER ENGINEERING SM31R Photoelectric Sensor:
- Numero modello: SM31R
- Numero parte: 25622
- Ingresso volumetage: 10-30 VCC
- Tipo di uscita: Bipolar 1 NPN / 1 PNP
- Corrente di uscita: 150mA (max per output)
- Lunghezza del cavo: 2 metri
- Campo di rilevamento: 3 metri
- Dimensioni del prodotto: Approximately 79.13 x 1.97 x 79.13 inches (Note: This dimension seems unusually large for a sensor, typically refers to packaging or shipping dimensions. Actual sensor is compact.)
- Peso: Circa 7.36 once
- Produttore: INGEGNERIA BANNER
- Prima data disponibile: 26 novembre 2013
9. Garanzia e supporto
For information regarding product warranty, technical support, or service, please contact BANNER ENGINEERING directly or visit their official website. Ensure you have your product model number (SM31R) and any relevant purchase details available when seeking support.
Produttore: INGEGNERIA BANNER
For the most up-to-date contact information and support resources, please refer to the official Banner Engineering websito o il distributore locale.
