1. Introduzione
This manual provides detailed instructions for the proper use, setup, and maintenance of your EMACHINE Laser Barcode Scanner, model IDATA LS-6030U. This device is designed for fast and simple barcode reading across a wide variety of applications, featuring an ergonomic design for enhanced handling and a rubber coating for high protection.
2. Contenuto della confezione
Si prega di controllare attentamente il contenuto della confezione. Se qualche articolo risulta mancante o danneggiato, contattare immediatamente il venditore.
- Scanner di codici a barre laser
- Cavo USB (1.8 metri)
- Manuale dell'utente (questo documento)
3. Caratteristiche del prodotto
The EMACHINE Laser Barcode Scanner offers robust performance and user-friendly features:
- Sorgente luminosa: 650 nm (+10/-5 nm) Laser Diode, 1mW (peak)
- Profondità di campo: (4 mils) 400 mm
- Velocità di scansione: 100 scansioni/sec
- Risoluzione: 0.1 mm (4mils) - Code 39
- Contrasto stampa: 45% o superiore
- Angolo di scansione: 38°
- Indicatori: Green/Red LED & audio signal
- Interfaccia: USB
- Simbologie supportate: Code 128, Codabar, Interleaved 2 of 5, Industrial 2 of 5, Matrix 2 of 5, UPC-A, UPC-E, EAN-13, EAN-8, MSI, PLESSEY, Code 11, Code 39, Code 32, Code 93
- Design ergonomico per una gestione confortevole.
- Durable rubber and ABS plastic construction for protection.
- No moving parts inside for enhanced durability.
- Facilmente programmabile.
4. Istruzioni per l'installazione
Per configurare lo scanner di codici a barre, segui questi passaggi:
- Collegare il cavo USB: Locate the USB cable provided in the package. Insert the smaller end of the USB cable into the port at the base of the barcode scanner handle.
- Connessione al computer: Insert the standard USB-A end of the cable into an available USB port on your computer or point-of-sale (POS) system.
- Installazione del driver (automatica): The scanner is typically plug-and-play. Your operating system should automatically detect the device and install the necessary drivers. Wait for the installation to complete, which is usually indicated by a notification.
- Prova di connessione: Open a text editor (like Notepad or Word) or any application where you want to input scanned data. Point the scanner at a known barcode (e.g., from a book or product) and press the trigger button. The scanner should emit a laser beam and an audible beep upon successful scan. The barcode data should appear in your open application.
Figure 4.1: Barcode scanner in use, demonstrating the scanning process.
5. Istruzioni per l'uso
Operating the EMACHINE Laser Barcode Scanner is straightforward:
- Accensione: The scanner receives power directly from the USB connection. Once connected to a powered USB port, it is ready for operation.
- Mirando: Hold the scanner comfortably in your hand. Point the scanning window towards the barcode you wish to read. Ensure the laser beam covers the entire barcode.
- Scansione: Premere e tenere premuto il pulsante di attivazione situato sull'impugnatura. Una linea laser rossa verrà proiettata dalla finestra di scansione.
- Successful Scan: Upon a successful read, the scanner will emit an audible beep, and the LED indicator will flash green. The scanned data will be transmitted to your connected computer or POS system, appearing in the active input field.
- Unsuccessful Scan: If the scanner does not beep or the LED does not flash green, reposition the scanner, adjust the distance, or try scanning from a different angle. Ensure the barcode is not damaged or obscured.
Figura 5.1: Fronte view of the barcode scanner.
Figura 5.2: lato view of the barcode scanner, showing its profile.
6. Specifiche
Detailed technical specifications for the EMACHINE Laser Barcode Scanner:
6.1. Caratteristiche elettriche
- Ingresso volumetage: 5 VCC ± 0.5 V
- Consumo attuale: 60mA massimo
- Certificazioni: FCC Class B, CE, IEC60825 Class II, CDRH: Class II
6.2. Caratteristiche fisiche
- Dimensioni (L * W * H): Dimensioni: 90 x 60 x 160 mm
- Peso: 110 g ± 5 g (without cable)
- Materiale: Rubber & ABS plastic
- Temperatura di esercizio: da 0° a 50° C
- Temperatura di conservazione: -20° a 60° C
- Umidità di esercizio: dal 10% al 85% senza condensa
- Umidità di conservazione: dal 5% al 95% senza condensa
- Immunità alla luce ambientale: Sunlight up to 36000 Lux
- Resistenza alla caduta: Dislivello 1.5 m
6.3. Reading Performance (Based on Code 39 label PCS=0.9 and 600 lux illumination, tolerance ± 1cm)
- 4 mils: 60 ~ 90 millimetri
- 5 mils: 55 ~ 120 millimetri
- 13 mils: 45 ~ 200 millimetri
- 20 mils: 45 ~ 300 millimetri
- 40 mils: 65 ~ 400 millimetri
7. Manutenzione
Una corretta manutenzione garantisce la longevità e le prestazioni ottimali del tuo scanner per codici a barre:
- Pulizia: Pulire regolarmente la finestra di scansione con un panno morbido e privo di lanugine. Per macchie ostinate, dampen the cloth slightly with water or a mild, non-abrasive cleaner. Do not use harsh chemicals or abrasive materials, as they can scratch the window and impair scanning performance.
- Magazzinaggio: When not in use, store the scanner in a clean, dry environment, away from direct sunlight, extreme temperatures, and excessive dust.
- Cura del cavo: Avoid bending or twisting the USB cable excessively, especially near the connectors, to prevent internal wire damage. Do not pull the cable to disconnect the scanner; always grasp the connector itself.
- Evitare gocce: While the scanner has drop resistance, repeated or severe drops can still cause damage. Handle the device with care.
8. Risoluzione Dei Problemi
Se riscontri problemi con lo scanner di codici a barre, fai riferimento ai seguenti problemi comuni e alle relative soluzioni:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Lo scanner non si accende o non risponde. | Cavo USB non collegato correttamente o porta USB difettosa. | Ensure the USB cable is securely connected to both the scanner and the computer. Try a different USB port on your computer. Test the scanner on another computer if possible. |
| Lo scanner emette un segnale acustico ma sullo schermo non vengono visualizzati dati. | Incorrect input focus on the computer; application not ready to receive input. | Ensure the cursor is active in the desired text field or application before scanning. Try scanning into a simple text editor like Notepad to confirm basic functionality. |
| Lo scanner non legge i codici a barre. | Barcode damaged, poor print quality, incorrect distance/angle, or dirty scanning window. | Ensure the barcode is clear and undamaged. Adjust the distance and angle of the scanner relative to the barcode. Clean the scanning window as described in the Maintenance section. Verify the barcode symbology is supported by the scanner. |
| Lo scanner legge alcuni codici a barre ma non altri. | Specific barcode symbology is disabled or not supported. | Refer to the "Supported Symbologies" in the Features section. If a specific symbology is not listed, the scanner may not support it. Some advanced settings might be programmable via specific configuration barcodes (refer to a full programming manual if available). |
9. Garanzia e supporto
This product is covered by a standard manufacturer's warranty. For specific warranty terms, duration, and conditions, please refer to the warranty card included with your purchase or contact your original point of sale or the manufacturer directly.
For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact the vendor or manufacturer using the contact information provided at the time of purchase.
