Leviton Wetguard Watertight Toggle Switch Cover (COVER-S) Instruction Manual

1. Prodotto finitoview

The Leviton Wetguard Watertight Toggle Switch Cover, Model COVER-S, is engineered for demanding industrial and wet environments. This cover provides robust protection for 15A-40A toggle switches, including manual motor starters, ensuring reliable operation in challenging conditions.

It features an impact and chemical-resistant Valox PBT construction, offering superior dimensional stability and UV weathering resistance. The integrated lockout handle complies with OSHA safety regulations, enhancing workplace safety. Stainless steel mounting and assembly screws are included to provide excellent corrosion resistance, ensuring long-term durability.

Figura 1: Leviton Wetguard Watertight Toggle Switch Cover (Model COVER-S). This image shows the yellow toggle switch cover with its red handle in the 'OFF' position, designed for industrial applications.

Caratteristiche principali:

• Impact and Chemical Resistant: Constructed from Valox PBT for extended life in abusive environments.
• OSHA Compliant Lockout: Integrated lockout handle meets OSHA safety regulations for secure operation.
• Resistenza alla corrosione: Stainless steel mounting and assembly screws ensure excellent resistance to corrosion.
• Watertight and Dust-tight: Meets IEC IP66 and NEMA 4 and 4X ratings when properly installed.
• Ampia compatibilità: Suitable for all 15A-40A toggle switches, including manual motor starters.

Video ufficiale del prodotto:

2. Configurazione e installazione

Proper installation of the Wetguard Toggle Switch Cover is crucial to maintain its IP66 and NEMA 4/4X ratings and ensure optimal protection. Installation should only be performed by a qualified electrician in accordance with all local and national electrical codes.

Strumenti necessari:

• Screwdriver (appropriate for triple-drive head screws)
• Wire strippers (if wiring a new switch)
• Occhiali di sicurezza
• Guanti

Fasi di installazione:

1. La sicurezza prima di tutto: AVVERTIMENTO: Turn off power at the circuit breaker or fuse box before beginning installation to prevent electrical shock. Verify power is off using a voltagetester.
2. Preparare l'interruttore: Ensure the 15A-40A toggle switch (not included) is properly installed in a suitable electrical box.
3. Mount the Cover: Align the Wetguard COVER-S over the toggle switch. Use the provided stainless steel mounting screws to secure the cover to the electrical box. Ensure the screws are tightened sufficiently to create a watertight seal, but do not overtighten. The triple-drive head screws facilitate proper tightening.
4. Verifica sigillo: Confirm that the cover is flush against the mounting surface and that the gasket (if applicable to the specific mounting method) is properly compressed to form a watertight barrier.
5. Operazione di prova: Once installed, operate the toggle switch handle to ensure smooth movement between ON and OFF positions.
6. Engage Lockout (if required): If OSHA lockout/tagout procedures are in effect, ensure the integrated lockout handle can be properly engaged when the switch is in the OFF position.
7. Ripristina alimentazione: Riattivare l'alimentazione tramite l'interruttore automatico o la scatola dei fusibili.

3. Istruzioni per l'uso

The Leviton Wetguard Toggle Switch Cover is designed for straightforward operation while providing maximum protection.

Funzionamento di base:

• To turn the connected device ON, move the red handle to the "ON" position.
• To turn the connected device SPENTO, move the red handle to the "OFF" position.

Blocco/Tagout Procedure:

The integrated lockout handle allows for compliance with OSHA lockout/tagout procedures to prevent accidental energization during maintenance or service.

1. Ensure the toggle switch is in the SPENTO posizione.
2. Position the lockout handle to cover the switch actuator.
3. Insert an appropriate lockout device (e.g., padlock) through the designated hole in the handle to secure it in the locked position.
4. Applicare un tagout device as required by safety protocols.
5. Verify that the switch cannot be operated while the lockout device is engaged.

4. Manutenzione

Regular maintenance ensures the longevity and continued performance of your Wetguard Toggle Switch Cover.

Pulizia:

• Clean the exterior of the cover periodically with a damp panno e detergente delicato.
• Avoid abrasive cleaners or solvents that could damage the Valox PBT material.
• Ensure the cover is dry before restoring power if it was disconnected for cleaning.

Ispezione:

• Periodically inspect the cover for any signs of damage, cracks, or wear.
• Check the integrity of the mounting screws and ensure they are securely tightened.
• Verify that the handle operates smoothly and that the lockout feature functions correctly.
• If any damage is observed that could compromise the watertight seal or structural integrity, replace the cover immediately.

5. Risoluzione Dei Problemi

This section provides solutions to common issues you might encounter with your Wetguard Toggle Switch Cover.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Leviton customer support.

6. Specifiche

7. Informazioni sulla garanzia

The Leviton Wetguard Watertight Toggle Switch Cover (COVER-S) is backed by a Best-in-Class Limited Lifetime Warranty. This warranty covers defects in materials and workmanship under normal use and service. For full details regarding warranty coverage, terms, and conditions, please refer to the official Leviton warranty documentation or contact Leviton customer support.

8. Assistenza clienti

Per assistenza tecnica, richieste di informazioni sui prodotti o reclami in garanzia, contattare l'assistenza clienti Leviton:

• Websito: www.leviton.com
• Telefono: Fare riferimento al Leviton websito per i numeri di contatto regionali.

Please have your product model number (COVER-S) and purchase information ready when contacting support.