Manuale utente del punto di accesso wireless N D-Link DAP-1360

1. Introduzione

The D-Link DAP-1360 Wireless N Access Point is a versatile networking device designed to extend or create a wireless network. It connects to a broadband modem, allowing you to share your internet connection wirelessly. This device is compliant with 802.11n standards, offering faster speeds and greater range compared to 802.11g, while maintaining backward compatibility with 802.11g and 802.11b devices. The DAP-1360 can be configured to operate in seven distinct modes to suit various networking requirements.

Figura 1: Fronte view of the D-Link DAP-1360 Wireless N Access Point. The device is black with two external antennas and indicator lights on the front panel.

2. Contenuto della confezione

Verifica che il pacco contenga i seguenti articoli:

• D-Link DAP-1360 Wireless N Access Point
• Adattatore di alimentazione
• Cavo Ethernet
• Guida di installazione rapida (se inclusa)

Se uno qualsiasi degli articoli risulta mancante o danneggiato, contattare il rivenditore D-Link locale.

3. Impostazione

3.1 Installazione fisica

1. Posizionamento: Place the DAP-1360 in a central location within your desired wireless coverage area, away from obstructions and sources of interference (e.g., microwave ovens, cordless phones).
2. Connetti alimentazione: Plug the power adapter into the DAP-1360's power port and then into a wall outlet. The power LED on the device should illuminate.
3. Connetti alla rete: Connect one end of an Ethernet cable to the LAN port on the DAP-1360 and the other end to your broadband modem or existing network switch/router.

Figura 2: Posteriore view of the D-Link DAP-1360, highlighting the Ethernet port and power input for physical connections.

3.2 Configurazione iniziale

After physical installation, you will need to configure the DAP-1360 using a web browser. The exact steps may vary slightly depending on your chosen operating mode.

1. Collegare un computer: Temporarily connect a computer directly to the DAP-1360's LAN port using an Ethernet cable, or connect wirelessly to its default Wi-Fi network (SSID and password usually found on a label on the device).
2. Accesso Web Interfaccia: Aprire un web browser and enter the default IP address of the DAP-1360 (e.g., http://192.168.0.50 or http://dlinkap). Refer to the Quick Installation Guide for the precise default IP and login credentials.
3. Login: Enter the default username and password (e.g., username: amministratore, parola d'ordine: [leave blank] or amministratore).
4. Eseguire la procedura guidata di installazione: Follow the on-screen setup wizard to select your desired operating mode and configure network settings, including Wi-Fi name (SSID) and password.
5. Salva impostazioni: Apply and save your configuration changes. The device may restart.

4. Modalità operative

The DAP-1360 offers seven distinct operating modes, allowing it to adapt to various network environments and requirements.

• Modalità punto di accesso (AP): This is the default mode. The device acts as a central hub, allowing wireless clients to connect to a wired network. It converts a wired connection into a wireless one.
• Wireless Client Mode: In this mode, the DAP-1360 connects to another access point wirelessly, acting as a wireless adapter for a wired device (e.g., a desktop PC or gaming console without Wi-Fi).
• Modalità Ponte: This mode allows two wired networks (LANs) to be joined wirelessly. It creates a wireless link between two segments of a wired network.
• Bridge with AP Mode: Combines the functionality of Bridge mode with Access Point mode. The device acts as a wireless hub for local clients while simultaneously bridging two wired networks.
• Modalità ripetitore: Extends the coverage of an existing wireless network. The DAP-1360 receives a wireless signal and re-transmits it, eliminating "dead spots" and increasing the range of your Wi-Fi.
• Modalità router client WISP: Designed for Wireless Internet Service Provider (WISP) subscribers. It allows the DAP-1360 to connect wirelessly to a WISP network and share that internet connection with multiple wired computers in a home or office without needing an additional router.
• WISP Repeater Mode: Similar to WISP Client Router mode, but also extends the WISP connection wirelessly to other wireless devices within the local network, acting as both a client and a repeater for the WISP service.

5. Manutenzione

Regular maintenance ensures optimal performance and longevity of your DAP-1360.

• Aggiornamenti del firmware: Controllare periodicamente il supporto D-Link webSito per gli aggiornamenti del firmware. L'aggiornamento del firmware può migliorare le prestazioni, aggiungere nuove funzionalità e correggere vulnerabilità di sicurezza.
• Pulizia: Mantenere il dispositivo pulito e privo di polvere. Utilizzare un panno morbido e asciutto per pulire l'esterno. Non utilizzare detergenti liquidi o spray.
• Ventilazione: Ensure the device has adequate ventilation. Do not cover ventilation openings or place the device in an enclosed space that restricts airflow.
• Riavvio: If the device experiences intermittent issues, a simple restart (unplugging the power for 10 seconds and plugging it back in) can often resolve them.

6. Risoluzione Dei Problemi

Questa sezione affronta i problemi più comuni che potresti riscontrare con il tuo DAP-1360.

6.1 Nessuna alimentazione / Dispositivo non si accende

• Ensure the power adapter is securely connected to both the DAP-1360 and a working electrical outlet.
• Verificare che la presa di corrente funzioni collegandovi un altro dispositivo.
• Check if the power adapter is the correct one supplied with the device.

6.2 Impossibile accedere al Web-Based Configuration Utility

• Ensure your computer is directly connected to the DAP-1360 via Ethernet or wirelessly to its default SSID.
• Verify your computer's IP settings are set to "Obtain an IP address automatically" (DHCP).
• Confirm you are using the correct default IP address (e.g., http://192.168.0.50) o nome host (http://dlinkap).
• Prova a svuotare la cache del tuo browser o a utilizzare un browser diverso web browser.
• If you have changed the device's IP address and forgotten it, you may need to perform a factory reset.

6.3 Nessuna connessione Internet / Velocità lenta

• Check the physical Ethernet cable connection between the DAP-1360 and your modem/router.
• Verifica che il tuo modem/router funzioni correttamente e che abbia una connessione Internet attiva.
• Ensure the DAP-1360 is configured in the correct operating mode for your network setup.
• Restart both your modem/router and the DAP-1360.
• Check for wireless interference from other devices.
• Confirm that your wireless security settings (WPA2, WPA) are correctly configured.

6.4 Wireless Network Not Visible

• Ensure the DAP-1360 is powered on and the wireless LED indicator is active.
• Check if the SSID Broadcast feature is enabled in the device's web configurazione.
• Verify that the wireless channel is not conflicting with other networks in your area. Try changing the channel in the settings.
• If the issue persists, try restarting the DAP-1360.

7. Specifiche

8. Garanzia e supporto

Per informazioni sulla garanzia, fare riferimento alla documentazione inclusa con il prodotto o visitare il sito ufficiale D-Link website for your region. D-Link provides technical support and resources to assist with product setup and troubleshooting.

For any queries or technical assistance, you may contact D-Link support channels. For specific inquiries related to purchase or local support, you may also contact your reseller. For example, Bizgram Asia Pte Ltd can be reached at +65-87776958 for support in their region.