1. Introduzione
This manual provides detailed instructions for the installation, operation, and maintenance of your Heltec Wireless Brushless DC Controller. Designed for electric two-wheelers and three-wheelers, this controller offers reliable performance with advanced features such as anti-theft, multi-speed control, reversing, and repair functions. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
2. Prodotto finitoview
The Heltec Brushless DC Controller is a high-performance component for electric vehicles, offering robust power output and intelligent control. It is compatible with a wide range of electric two-wheelers (e.g., e-bikes, scooters) and three-wheelers (e.g., tricycles).
Le caratteristiche principali includono:
- Uscita ad alta potenza: Available in 2000W and 2500W versions for strong acceleration and climbing ability.
- MultivoltageSupporto: Operates with 48V, 60V, or 72V battery systems.
- Controllo senza fili: Simplifies installation and reduces wiring complexity.
- C durevoleasing: Features an aluminum waterproof, moisture-proof, and dust-proof casing for extended service life.
- Funzionamento a basso rumore: Engineered for quiet performance, as low as 15 decibels.
3. Specifiche
Refer to the table below for detailed product parameters for both models.
| Parametro | HT-BLDC2000W72-CA (2000W Model) | HT-BLDC2500W72-JH (2500W Model) |
|---|---|---|
| Tipo di controllore | Brushless DC Controller | |
| Modello | Controllore senza fili | |
| Volume di lavorotage | 48V/60V/72V | |
| Corrente massima di lavoro | 40A | 45A |
| Funzione | Anti-theft/three-speed/reversing/repair/one-line pass | |
| Energia | 2000W | 2500W |
| Hall Sensing Phase | 120° | |
| Matching Wiring Harness | Hall line/Information line/Learning line | |
| Dimensioni (L*W*H) | 180*98*40mm | 180*90*50mm |
4. Contenuto della confezione
Il pacchetto include i seguenti articoli:
For 2000W Model:
- Controllore * 1
- Viti * 5
- Function lines * 3
For 2500W Model:
- Controllore * 1
- Viti * 5
- Function lines * 3
5. Installazione e configurazione
This section describes the wiring harness connections for the controller. Please ensure all connections are secure and correct before powering on the system. If the provided plugs are not universal for your vehicle, you may need to adapt the wiring according to the functional wire ends.
5.1. Controller Wiring Harness Description (2500W Model)
- Linea Hall: Connects to the motor's Hall sensors for position feedback.
- Study line: Used for motor learning/matching.
- Burglar alarm: Connects to the vehicle's alarm system.
- Turn handle: Connects to the throttle/accelerator.
- Schermo LCD: Connects to the vehicle's LCD display for information.
- Strumenti: Connects to other vehicle instruments.
- Low brake: Connects to the low-level brake signal.
- High brake: Connects to the high-level brake signal.
- Crociera: For cruise control functionality.
- Cavo di alimentazione: Main power input from the battery.
- Astern: For reverse gear functionality.
- Three cycle: Likely related to a three-speed mode or cycle function.
- Tre velocità: For selecting between different speed modes.
5.2. Controller Wiring Harness Description (2000W Model)
- Linea Hall: Connects to the motor's Hall sensors for position feedback.
- Study wire: Used for motor learning/matching.
- Burglar alarm: Connects to the vehicle's alarm system.
- Alarm Power supply: Provides power for the alarm system.
- Turn handle: Connects to the throttle/accelerator.
- One-click access: Function for quick access or mode change.
- Yadea Instrument: Connects to Yadea brand instruments.
- Astern: For reverse gear functionality.
- Low brake: Connects to the low-level brake signal.
- High brake: Connects to the high-level brake signal.
- Crociera: For cruise control functionality.
- Positive electrode wire: Main positive power connection.
- Soft and hard start: For adjusting acceleration characteristics.
- Tre velocità: For selecting between different speed modes.
- Three speed cycle: For cycling through speed modes.
5.3. General Connection Guidance
Ensure all connections are made according to your vehicle's wiring diagram and the functions described above. Incorrect wiring can damage the controller or other vehicle components.
6. Istruzioni per l'uso
Once the controller is correctly installed and connected, you can operate your electric vehicle using its various functions:
- Accensione/spegnimento: Use your vehicle's main power switch. The controller will initialize automatically.
- Controllo della velocità: Use the 'Turn handle' (throttle) to control the vehicle's speed.
- Three-Speed Mode: If your vehicle supports it, use the 'Three speed' or 'Three speed cycle' wire to switch between different speed settings (e.g., low, medium, high).
- Inversione: Activate the 'Astern' function for reverse movement, if available on your vehicle.
- Frenata: The controller integrates with your vehicle's braking system via 'Low brake' and 'High brake' lines.
- Antifurto: If connected to an alarm system, the controller supports anti-theft features.
- Controllo della velocità di crociera: Engage the 'Cruise' function for maintaining a constant speed, if supported.
- One-Line Pass / Repair: These functions are typically for diagnostic or specific operational modes. Consult your vehicle's manual for specific usage.
7. Manutenzione
To ensure the longevity and optimal performance of your Heltec Brushless DC Controller, follow these maintenance guidelines:
- Mantenere pulito: Regularly clean the exterior of the controller to prevent dust and dirt buildup. Use a soft, dry cloth.
- Evitare l'umidità: Mentre il casing is waterproof and moisture-proof, avoid prolonged exposure to extreme wet conditions or submersion. Ensure all connections are dry before operation.
- Controllare le connessioni: Periodically inspect all wiring connections for tightness and signs of wear or corrosion. Loose connections can lead to intermittent operation or damage.
- Gestione della temperatura: Ensure the controller is installed in a location with adequate airflow to prevent overheating, especially during heavy use.
- Evitare l'impatto: Proteggere il controller da urti fisici che potrebbero danneggiare i componenti interni.
8. Risoluzione Dei Problemi
If you encounter issues with your controller, consider the following general troubleshooting steps:
- Nessun potere: Check battery connections, main power switch, and the controller's power cord. Ensure the battery is charged.
- Il motore non risponde: Verify all motor phase wires and Hall sensor connections. Check the throttle ('Turn handle') connection.
- Funzionamento intermittente: Ispezionare tutti i cavi per verificare che non vi siano collegamenti allentati o isolamento danneggiato.
- Rumore insolito: Ensure the motor is properly connected and there are no mechanical obstructions.
- Surriscaldamento: Check for proper ventilation around the controller. Reduce load if operating in extreme conditions.
For persistent issues, it is recommended to consult a qualified technician or contact Heltec customer support.
9. Suggerimenti per l'utente
- Configurazione iniziale: After installation, perform a motor learning procedure (using the 'Study line') if your motor and controller are not pre-matched. This optimizes performance.
- Voltage Compatibilità: Assicurati sempre che la batteria sia caricatage corrisponde al volume supportato dal controllertage range (48V/60V/72V) to prevent damage.
- Installazione professionale: If you are unfamiliar with electrical wiring, it is highly recommended to seek professional assistance for installation to avoid potential hazards.
10. Garanzia e supporto
For warranty information, technical support, or service inquiries, please contact HeltecTools Store directly. Keep your purchase receipt as proof of purchase. Do not attempt to open or modify the controller, as this may void your warranty.