Manuale utente dell'orologio digitale Disney Stitch

Introduzione

Grazie per l'acquistoasing the Stitch Disney Digital Watch. This manual provides detailed instructions on how to set up, operate, and maintain your new watch. Please read it carefully to ensure proper use and longevity of your product.

Specifiche

Istruzioni di installazione

This section guides you through the initial setup of your digital watch, including activating the display and setting the time and date.

1. Activating the Display

The watch display is typically off to conserve battery. To activate it and view the time:

1. Press the button on the right side of the watch once. The display will light up, showing the current time.

2. Impostazione di ora e data

To adjust the time and date:

1. From the time display, press and hold the button for approximately 3 seconds until the hour digits begin to flash. This indicates you are in setting mode.
2. Imposta ora: While the hour digits are flashing, short press the button repeatedly to advance the hour. The watch supports both 12-hour (with AM/PM indicator) and 24-hour formats.
3. Imposta minuto: Once the hour is set, press and hold the button again for 3 seconds. The minute digits will begin to flash. Short press the button to adjust the minutes.
4. Imposta mese: Press and hold the button again. The month digits will flash. Short press to adjust the month.
5. Imposta giorno: Press and hold the button again. The day digits will flash. Short press to adjust the day.
6. Uscita dalla modalità di impostazione: After setting the day, press and hold the button one last time to exit the setting mode. The display will stop flashing, and your settings will be saved.

For a visual guide, please refer to the instructional video below:

Funzionamento dell'orologio

Your Stitch Disney Digital Watch is designed for simple and intuitive operation.

1. Modalità di visualizzazione

The watch features multiple display modes that can be cycled through with a single press of the button:

• Visualizzazione dell'ora: A short press of the button will show the current time (hours and minutes).
• Visualizzazione della data: Another short press will switch the display to show the current date (month and day).
• Altre caratteristiche: Depending on the model, additional short presses may cycle through other features like seconds or a simple animation.

2. Funzionalità finiteview

• Display a LED: Bright and clear digital display for easy readability.
• Retroilluminazione: The display illuminates when activated, making it visible in low-light conditions.
• Data automatica: The watch automatically adjusts for the correct date.
• Calendario completo: Displays both month and day.

Cura e manutenzione

Proper care will help extend the life and appearance of your watch.

1. Resistenza all'acqua

Your watch has a water resistance rating of 3 Bar (30 meters), which means it is suitable for daily use and can withstand splashes or brief immersion in water, such as hand washing.

Avvisi importanti:

• Avoid hot water and steam. Exposure to hot water or steam can damage the watch's seals and internal components.
• In some cases, water vapor may appear inside the watch due to temperature differences. This is normal. Placing the watch on a desiccant (e.g., silica gel packet) will help the vapor disappear.
• Do not press buttons while the watch is wet or submerged.

2. Pulizia

• Pulisci la cassa e il cinturino dell'orologio con un panno morbido eamp stoffa.
• Avoid using harsh chemicals or abrasive materials, as these can damage the plastic case and silicone band.
• Assicurarsi che l'orologio sia completamente asciutto prima di riporlo o indossarlo.

3. Sostituzione della batteria

This watch uses a non-rechargeable button-cell battery. When the display becomes dim or stops working, the battery will need to be replaced. It is recommended to have the battery replaced by a professional watch technician to ensure the water resistance seal is maintained.

Risoluzione dei problemi

Ecco le soluzioni ai problemi più comuni che potresti riscontrare:

1. Watch Display Not Turning On

• Controllare la batteria: The battery may be depleted. Refer to the 'Battery Replacement' section under Maintenance.
• Premi il bottone: Ensure you are pressing the button firmly. A single short press should activate the display.

2. Ora o data errate

• Reimposta ora/data: Per correggere l'ora e la data, seguire le istruzioni "Impostazione di ora e data" nella sezione Configurazione.

3. Water Vapor Inside Display

• Temperature Difference: This can occur due to sudden temperature changes. Place the watch with a desiccant (e.g., silica gel) in an airtight container for a few hours to absorb the moisture. If the issue persists, consult a professional.

Suggerimenti per l'utente

• Durata della batteria: To maximize battery life, avoid unnecessary activation of the display. The display automatically turns off after a few seconds of inactivity.
• Esposizione all'acqua: While the watch is water-resistant, it's best to remove it before showering, swimming, or engaging in water sports to prevent potential damage from prolonged exposure or high-pressure water.
• Tempo di presa: If you find setting the time challenging, watch the instructional video in the 'Setup Instructions' section for a clear demonstration.

Garanzia

This product comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear.

Supporto

If you have any questions or require further assistance with your Stitch Disney Digital Watch, please contact the seller or retailer from whom you purchased the product. They will be able to provide specific support and guidance.