YOUHA Electric Breast Pump

YOUHA Electric Breast Pump Instruction Manual

Model: Electric Breast Pump

1. Introduzione

This manual provides instructions for the safe and effective use of your YOUHA Electric Breast Pump. Please read it thoroughly before first use and keep it for future reference.

YOUHA Electric Breast Pump with two bottles and main unit

Image: The YOUHA Electric Breast Pump, showing the main unit connected to two breast shields and collection bottles.

2. Informazioni sulla sicurezza

  • Always ensure the pump is clean and sterilized before each use.
  • Non immergere l'unità motore in acqua o altri liquidi.
  • Tenere fuori dalla portata dei bambini.
  • Utilizzare solo il cavo di ricarica fornito.
  • Interrompere l'uso se si avverte dolore o disagio.
  • This device is intended for personal use only.

3. Caratteristiche del prodotto

  • Materiale: Food-grade plastic and silicone, BPA-free, Latex-free.
  • Modalità: 2 modes (Massage and Expression).
  • Livelli: 9 adjustable suction levels for each mode.
  • Progetto: Anti-reflux closed system to prevent milk backflow and contamination.
  • Operazione: Ultra-silent technology for low vibration and noise (<60dB).
  • Pompaggio: Supports single or double pumping.
  • Alimentazione elettrica: Multiple charging ways (USB compatible).
Diagram showing key features of the YOUHA breast pump: 9 levels, anti-backflow, multiple charging ways, two modes, single/double pumping, improve lactation, safe material, BPA free.

Immagine: Oltreview of the breast pump's key features, including 9 suction levels, anti-backflow design, and BPA-free materials.

4. Componenti finitiview

Familiarize yourself with the parts of your YOUHA Electric Breast Pump:

  • Motor Unit (main control unit)
  • Breast Shields (flanges)
  • Collection Bottles (150ml / 5oz capacity each)
  • Tubi
  • Valvole
  • Membrane
  • Cavo di ricarica (USB)
  • Manuale d'uso
Double Electric Breast Pump Portable & Compact Design, showing the assembled pump with two bottles and the main unit.

Image: The assembled double electric breast pump, highlighting its portable and compact design.

5. Installazione e assemblaggio

  1. Pulire e sterilizzare: Before first use and after each subsequent use, disassemble all parts that come into contact with breast milk (breast shields, bottles, valves, diaphragms, tubing) and clean them thoroughly. Sterilize by boiling in water or using a steam sterilizer. The motor unit should NOT be washed or sterilized.
  2. Assemble Breast Shield Kit: Attach the valve to the bottom of the breast shield. Place the diaphragm onto the top of the breast shield.
  3. Attach Bottle: Screw the collection bottle onto the bottom of the breast shield assembly.
  4. Collegare il tubo: Connect one end of the tubing to the breast shield assembly and the other end to the motor unit. For double pumping, repeat steps 2-3 for the second breast shield kit and connect both tubes to the motor unit.
  5. Collegamento elettrico: Connect the charging cable to the motor unit and a suitable USB power source (e.g., wall adapter, power bank, laptop).
Diagram illustrating the anti-reflux closed system of the breast pump, showing milk flow into bottles and air flow preventing backflow into the tubing and motor unit.

Image: Anti-reflux closed system diagram, showing how milk and air flow are separated to prevent contamination.

6. Istruzioni per l'uso

The YOUHA Electric Breast Pump features two modes and nine adjustable levels for comfortable and efficient expression.

6.1 Pannello di controllo

Diagram of the breast pump's control panel with four buttons: Power ON/OFF, Mode Toggle (Massage/Expression), Suction Decrease (-), and Suction Increase (+).

Image: Control panel layout with buttons for Power ON/OFF, Mode Toggle (Massage/Expression), Suction Decrease, and Suction Increase.

  • Pulsante di accensione/spegnimento: Press to turn the pump on or off.
  • Mode Toggle Button: Switches between Massage Mode and Expression Mode.
  • Suction Increase (+) Button: Increases suction strength.
  • Suction Decrease (-) Button: Decreases suction strength.

6.2 Pumping Modes

Diagram showing the difference between Expression Mode and Massage Mode. Massage mode shows gentle waves, while Expression mode shows stronger, more rhythmic suction.

Image: Visual representation of Massage Mode (gentle stimulation) and Expression Mode (stronger suction for milk extraction).

  • Modalità massaggio: Simulates a baby's natural suckling to stimulate milk let-down. Use this mode at the beginning of each pumping session for 2-5 minutes.
  • Modalità di espressione: Provides a stronger, rhythmic suction to efficiently express milk. Switch to this mode after let-down occurs.

6.3 Pumping Procedure

  1. Posizionamento: Center your nipple in the breast shield tunnel. Ensure a comfortable and secure seal around your breast.
  2. Accensione: Press the Power ON/OFF button. The pump will start in Massage Mode.
  3. Massage Phase: Begin with Massage Mode for 2-5 minutes to stimulate milk flow. Adjust the suction level using the (+) and (-) buttons to a comfortable setting.
  4. Fase di espressione: Once milk let-down begins, press the Mode Toggle button to switch to Expression Mode. Adjust the suction level to your comfort.
  5. Durata: Pump for approximately 15-20 minutes per breast, or until milk flow significantly slows. The pump has a fixed operating time of 30 minutes before automatically shutting off.
  6. Spegni: Press the Power ON/OFF button to turn off the pump.
  7. Smontare: Carefully remove the breast shields and bottles.

7. Manutenzione e pulizia

Una pulizia e una manutenzione adeguate sono essenziali per l'igiene e la longevità del tiralatte.

7.1 Pulizia giornaliera

  1. Smontare: Immediately after each use, disassemble all parts that come into contact with breast milk (breast shields, bottles, valves, diaphragms, tubing).
  2. Risciacquo: Rinse all disassembled parts under cool running water to remove any residual milk.
  3. Lavare: Lavare i pezzi in acqua calda e sapone utilizzando una spazzola apposita.
  4. Risciacquare di nuovo: Risciacquare abbondantemente sotto l'acqua corrente pulita.
  5. Asciugatura all'aria: Place parts on a clean paper towel or drying rack and allow them to air dry completely. Do not use a cloth towel as it may leave lint.
Image showing breast pump components (bottle, nipple, breast shield) submerged in water, illustrating the 'easy to clean' feature.

Image: Breast pump components being cleaned in water, emphasizing ease of cleaning.

7.2 Sterilizzazione

Sterilize all milk-contacting parts at least once a day. This can be done by:

  • Bollente: Mettere i pezzi in una pentola di acqua bollente per 5 minuti.
  • Sterilizzatore a vapore: Use a microwave or electric steam sterilizer according to the manufacturer's instructions.

Importante: The motor unit and charging cable should NEVER be washed or sterilized. Wipe the motor unit with a clean, damp panno se necessario.

7.3 Conservazione

Store all clean and dry pump parts in a clean, covered container when not in use.

8. Risoluzione Dei Problemi

ProblemaPossibile causaSoluzione
Nessuna aspirazione o aspirazione debole
  • Assemblaggio improprio delle parti.
  • Valvola/membrana danneggiata o usurata.
  • Tubing not properly connected or damaged.
  • La coppa per il seno non è ben aderente al seno.
  • Rimontare tutti i componenti con cura, assicurandosi che siano ben fissati.
  • Controllare che la valvola e la membrana non presentino strappi o danni; sostituirle se necessario.
  • Check tubing for kinks or damage; ensure secure connection to both motor unit and breast shield.
  • Reposition breast shield to ensure a good seal.
La pompa non si accende
  • Batteria scarica o assenza di alimentazione.
  • Collegamento elettrico difettoso.
  • Assicurarsi che la pompa sia carica o collegata a una fonte di alimentazione.
  • Check charging cable and adapter for damage. Try a different USB port or adapter.
Dolore o fastidio durante l'estrazione
  • Taglia errata della coppa per il seno.
  • Livello di aspirazione troppo alto.
  • Improper nipple alignment.
  • Ensure breast shield size is appropriate for your nipple.
  • Ridurre il livello di aspirazione a un livello confortevole.
  • Reposition breast shield to ensure nipple is centered.

9. Specifiche

CaratteristicaDettaglio
MarcaTUOIHA
Numero di modelloTiralatte elettrico
MaterialeABS + PP + Silicone
Caratteristica del materialeLatex Free, BPA Free
ColoreBianco
Volume Nominaletage5V
Corrente nominale1000mA
ModalitàMassage, Expression
Livelli regolabili9 Levels Each Mode
Fixed Pumping Time30 Minutes (automatic shut-off)
Sucking Power60mmhg-380mmhg
Livello di rumore<60dB
Bottle Capacity (Each)150 ml / 5 once
Peso dell'articolo480 g / 1.1 libbre
Dimensioni del pacco21.5 * 18.5 * 10.5 cm / 8.5 * 7.3 * 4.1 pollici
Peso del pacco600 g / 1.3 libbre

10. Suggerimenti per l'utente

  • La comodità è fondamentale: Always pump at a suction level that is comfortable for you. Pumping should not be painful.
  • Vestibilità corretta: Ensure your breast shield fits correctly. The nipple should move freely in the tunnel without excessive rubbing.
  • Regular Sterilization: While daily cleaning is essential, remember to sterilize all milk-contacting parts regularly to maintain hygiene.
  • Opzioni di alimentazione: Prendi vantaggiotage of the multiple charging options (USB) for portability and convenience.
  • Parti in silicone: The breast pads are made of silicone material, which is soft and comfortable.

11. Garanzia e supporto

This product comes with a 1-year guarantee. If your purchase does not meet merchantable quality, fitness for purpose, or match the description, please contact the seller for resolution.

For defective or faulty products, please provide photos or videos to the seller for confirmation, and they will arrange for resend or refund.

© YOUHA. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.