isyoung BF002 Smart Bird Feeder with Camera Instruction Manual


Bird feeder	Perch	Bird feeder bracket

Drill Sticker	Screw for top cover*2	Bracket connector

Screw*3	Green screws spacers *4	Screw for bracket *4

Pin	Waterproof rubber	Screw for perch*2

Charging cable

SPECIFICATIONS FOR BIRD FEEDER

Product Model	BF002
Charging	Solar panel and USB cable
Battery	5200 mAh Rechargeable Lithium-Ion Battery
Resolution	2.0MegaPixels Photos and 1080P HD Live Stream Video
Operating Temperature	-5°F to 120°F (-20.5°C to 48.5°C)
Wireless Type	WiFi 2.4GHz
Field of View	Diagonal: 130°, Horizontal: 94°, Vertical: 40°
Dimension	L9.45 x W8.66 x H11.02 inches (24 x 22 x 28 cm)
Power Supply	DC 5V2A
Power Consumption	2W( Max.)
Battery Life	4-6 years
Night Visual Range	8m(Max)
Anti-flicker	50HZ/60HZ
SOLAR PANEL SPECIFICATION
IPCE	19%
Working Voltage (Vmp)	5V±5%
Working Current (Imp)	400mA±5%
Open Circuit Voltage (VOC)	7.2V±5%
Short-Circuit Current (ISC)	480mA±5%

INTRODUCTION FOR BIRD FEEDER

Bird Feeder Cover

Bracket
Perch

Camera
Solar Panel

INTRODUCTION FOR CAMERA

(1) Indicator Light
(2) Infrared LED
(3) Microphone
(4) Motion sensor
(5) Light sensor
(6) Lens
(7) Mounting hole
(8) Speaker
(9) Power ON/OFF
(10) Sync/Reset
(11) Charging port
(12) TF card slot (Capacity expansion 128G)

INDICATOR LIGHT

Camera turn on: Red light always ON.

Pairing mode: Red light fast blinking.
Network connecting: Green light fast blinking.

Network connected: Green light always ON.
Abnormal status: Red light slow blinking.(Need to reset)

During firmware update: Yellow light always ON.
Charging status: White light always ON during charging and OFF after fully charged.

HOW TO CONNECT TO THE APP

Download or scan the QR code and install the Bird Lover App for either IOS or Android. Once downloaded, the APP will prompt you to register your device. Enter your phone number or email address which one makes you feel comfortable and select the country you live in. You will receive the registration code. Input the registration code, then create a password.

1.Turn on the camera power and you will see the indicator light flashing quickly and hear a sound.

2.Open the App and follow the steps below to start the connection.

3.You need to enter the right Wi-Fi password for the first-time connection.

4.Scan the QR code with the camera. You will hear a prompt sound after a successful scanning.

NOTE: The QR code needs to be aimed at the camera below

5.Wait for the connection to complete, then click “Done”.

APP INTERFACE INTRODUCTION

Quality adjustment: you can choose HD or SD
Battery Remaining Capacity
Voice switch
Zoom in the screen for camera
Screen horizontal and vertical adjustment
Take photo
Bird recognition
Shot videos

Playback for previous
View photos or videos took
Check out the bird collection

Share the device
Motion detection(Click to turn on/off)
Device Volume

One-Way Talk
Siren
Notification for motion detection

Cloud storage service
History for bird recognition
Back to all function interface

HOW TO INSTALL

1.Stick the sticker on the tree or wall and drill holes within the range marked on the sticker.

2.Insert the green plastic screw spacers into the hole.

3.Fix the bracket with long screws.

4.Install the bird feeder and align the three holes underneath.

5.Fix bird feeder with three short screws.

6.Install the perch with the two screws in the package.

7.The bird house can rotate left and right.

HOW TO CHARGE THE CAMERA

(1) Rotate the camera down.
(2) Connect the solar charging cable.
(3) Or remove the camera and charge it with the charging cable.

Documents / Resources

isyoung BF002 Smart Bird Feeder with Camera [pdf] Instruction Manual
BF002, BF002 Smart Bird Feeder with Camera, Smart Bird Feeder with Camera, Bird Feeder with Camera, Feeder with Camera, Camera

References

User Manual

Smart AI Recognition Bird Feeder

Product manual

WARM TIPS

WHAT’S IN THE BOX