Contents
hide
Specifications
- Product Name: V4-WPM Waterproof RF 2-Button RGBW LED Controller
- Input Voltage: 12-24VDC
- Output Voltage: 12-24VDC
- Output Current: 4CH, 1A/CH
- Output Power: 48W@12V, 96W@24V
- Output Type: Constant Voltage
- IP Rating: IP67
- Warranty: 5 years
- Dimming Range: 1 – 100%
- Control Distance: 30m (Barrier-free space)
- Dimming Gray Scale: 4096 levels
- Dimming Curve: Logarithmic
- PWM Frequency: 2000Hz
- Operating Temperature: -20°C to +50°C
- Case Temperature (Max.): +85°C
Product Usage Instructions
Mechanical Structures and Installations
- The V4-WPM RF RGBW LED Controller features a compact design with dimensions of L112 x W80 x H45mm and a weight of 0.130kg.
- It includes a 40cm light set button, LED indicator, on/off button, and various connectors for power input and LED output.
Wiring Diagram
Connect the V4-WPM controller to a power supply (12-24VDC) and an RGBW LED strip using the provided wiring diagram. Ensure proper alignment and tightening of connectors.
Button Functions
- The 2-button operation allows for various functions.
- Short press: Turns on/off.
- Long press (1- 6s): Continuous brightness adjustment (dimming range 1-100%).
- Short press: Enter static mode and switch between 8 static colors.
- Double click: Enter dynamic mode and switch between 4 dynamic modes.
- Long press: Adjust color saturation in static mode or switch dynamic change speed in dynamic mode.
Match With RF Remote Controller
- To match or delete remote controllers.
- Match using Match key: Press and hold a button for 2s, then press the on/off key or zone key on the remote to complete the match.
- Match using Power Restart: Switch off and on the power of the controller, then press the on/off key or zone key on the remote multiple times to match.
- Delete: Press and hold a button for 5 seconds to delete all matched remotes.
FEATURES
- RF RGBW LED controller with 4-channel constant voltage output.
- IP67 rating, internal gluing, suitable for outdoor and damp environments.
- 2-button operation, support on/off light, adjust brightness, color, dynamic mode and dynamic speed.
- 10 built-in dynamic modes, including jump and fade.
- 4096 levels dimming smoothly without any flash.
- Match with RF 2.4G single or multi-zone RGBW remote controller optional.
Technical Parameters
Mechanical Structures and Installations
NOTE: When installing, align the insert and tighten the nut.
Wiring Diagram
Short press: Turns on/off.
- Long press (1- 6s): Continuous brightness adjustment, dimming range 1-100%.
Short press: Enter static mode and switch 8 static colors (red – orange – yellow – green – cyan – blue – purple – white).
- Double click: Enter dynamic mode and switch 4 dynamic modes (6 color jump, 6 color fade, white jump, white fade).
- The white color jumps in the order of 25%, 50% and 100% brightness.
- Long press: In static mode, long press for 1- 6s, adjust the color saturation continuously, i.e., the current static color to white gradient transition.
- In dynamic mode, long press for 2s to sequentially switch 5 levels of dynamic change speed, and the LED indicator blinks 1 time for every level of switching.
Match With RF Remote Controller
There are two ways to match/delete.
Use Match key
Match:
- Press and hold
button
2s, the LED indicator blinks slowly, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote.
- The LED indicator stop blinks means the match is successful.
Delete:
- Press and hold
the
button5s,
- The LED indicator’s fast flash 5 times means all matched remotes were deleted.
Use Power Restart
Match:
- Switch off the power of the controller, then switch on power, repeat.
- Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote.
- The light blinking 3 times means the match is successful
Delete:
- Switch off the power of the controller, then switch on power, repeat.
- Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote.
- The light blinking 5 times means all matched remotes were deleted..
Dynamic Change Mode
(called up by RF remote control)
No. | Name | No. | Name |
1 | RGB jump | 6 | RGB fade in and out |
2 | RGB smooth | 7 | Red fades in and out |
3 | 6 color jump | 8 | Green fades in and out |
4 | 6 color smooth | 9 | Blue fades in and out |
5 | Yellow, cyan, purple smooth | 10 | White fades in and out |
Dimming Curve
Safety Information
- Do not install it with electricity.
- Please use it within the working temperature range of -20 ~+50 to ensure the stable performance of the product.
- Avoid prolonged immersion in water.
- Avoid using it in large metal areas or areas with strong electromagnetic waves; otherwise, the remote control distance will be affected.
Frequently Asked Questions
- Q: What is the warranty for the V4-WPM Waterproof RF 2-Button RGBW LED Controller?
- A: The product comes with a 5-year warranty.
- Q: What is the maximum control distance of the controller?
- A: The control distance is up to 30m in a barrier-free space.
- Q: How many dynamic modes are built into the controller?
- A: The controller has 10 built-in dynamic modes, including jump and fade effects.
Documents / Resources
![]() |
iskydance V4-WPM Waterproof RF 2 Button RGBW LED Controller [pdf] Owner's Manual V4-WPM, RFRGBW, V4-WPM Waterproof RF 2 Button RGBW LED Controller, V4-WPM, Waterproof RF 2 Button RGBW LED Controller, Button RGBW LED Controller, LED Controller |