MIDIPLUS X MAX Series MIDI keyboard
Tæknilýsing
- Gerð: X Max
- Efst Panel Stýringar: X knob, X band, Keyboard, Headphones
- Samhæfni: Works with DAW software
- Heyrnartól tjakkur: 6.35 mm
Notkunarleiðbeiningar fyrir vöru
- Yfirview
- The X Max is a versatile controller designed for use with DAW software. It features various controls on the top panel for adjusting parameters and triggering notes.
- Efsta pallborðið
- X knob: Use this knob to control DAW and software instrument parameters or adjust keyboard settings.
- X hljómsveit: Control the expression of sounds using this band.
- Lyklaborð: Trigger notes on/off and use it as shortcuts to access edit more parameters.
- Heyrnartól: Connect your 6.35mm headphones here for private listening.
- Leiðsögumaður
- Refer to the user manual for detailed instructions on setting up and using the X Max controller with your preferred DAW software.
- Aðgerðarhnappar
- Familiarize yourself with the function buttons on the controller to optimize your workflow and control over your music production.
- Stillingarstilling
- Enter the setting mode to customize various parameters according to your preferences for a personalized music production experience.
- Factory Reset
- If needed, perform a factory reset to restore the X Max controller to its original settings.
- DAW stillingar
- Explore the DAW settings section in the user manual to configure the controller for seamless integration with your digital audio workstation.
- Logic Pro X
- Specific instructions for setting up the X Max controller with Logic Pro X can be found in this section of the manual.
- MIDIPLUS stjórnstöð
- Learn about the MIDIPLUS Control Center and its functionalities to enhance your music production workflow.
- Viðauki
- Refer to the appendix for additional information, troubleshooting tips, and resources related to the X Max controller.
Algengar spurningar
Q: Can I use the X Max controller with other music production software?
A: The X Max controller is primarily designed for use with DAW software but may be compatible with other music production applications. Check the user manual for more information on compatibility.
Q: How do I clean the X Max controller?
A: Before cleaning, always remove the batteries and USB cable. Use a soft, damp cloth to gently wipe the surfaces of the controller. Avoid using harsh chemicals or abrasive materials that may damage the device.
Inngangur
Þakka þér fyrir kaupinasing the X Max Series MIDI keyboard. This series includes X4 Max, X6 Max, and X8 Max, which feature 49, 61, and 88 semi-weighted keys with velocity-sensitive and aftertouch. They come with over 200 built-in voices, equipped with pitch bend and modulation wheels, transport controls, encoders, and pads. In addition, the X Max Series is compatible with many popular DAWs. It offers 20 smart scales, including Chinese Pentatonic, Japanese, Blues and more. With four velocity response curves, including Normal, Fixed, Soft and Hard, it provides an enhanced user experience. Please read this guide carefully before use to get started quickly.
Mikilvægar athugasemdir:
Vinsamlegast lestu eftirfarandi varúðarráðstafanir vandlega fyrir notkun til að forðast að skemma búnaðinn eða valda líkamsmeiðslum. Varúðarráðstafanir fela í sér eftirfarandi:
1. Read and understand all the illustrations. 2. Always follow the instructions on the device. 3. Before cleaning the device, always remove the batteries and the USB cable. When cleaning, use a
soft and dry cloth. Do not use gasoline, alcohol, acetone, turpentine or any other organic solutions; do not use a liquid cleaner, spray or cloth that’s too wet. 4. Disconnect the USB cable and remove the batteries if not used for extended periods. 5. Do not use the device near water or moisture, such as a bathtub, sink, swimming pool or similar place. 6. Do not place the device in an unstable position where it might accidentally fall over. 7. Do not place heavy objects on the device. 8. Do not place the device near a heat vent at any location with poor air circulation. 9. Do not open or insert anything into the device that may cause a fire or electrical shock. 10. Do not spill any kind of liquid onto the device. 11. Do not expose the device to hot sunlight. 12. Do not use the device when there is a gas leak nearby.
X Max User Manual 1
Yfirview
1.1 Efsta spjaldið
X hnappur: Til að stjórna DAW og stillingum hugbúnaðarhljóðfæra eða stilla stillingar hljómborðsins.
Transport buttons: For controlling the transport of DAW. Knobs: For the control of DAW and software instrument parameters. Buttons: For the control of DAW and software instrument parameters. Display: Provides real time feedback of control information. Pads: Send channel 10 instrument notes. Function buttons: For controlling the keyboards function. fadersOnly X6 Max and X8 Max: For the control of DAW and software instrument parameters. Transpose button: Activate keyboard’s semitone control. Octave buttons: Activate keyboard’s octave control. Pitch & Modulation touch joywheel: For controlling the pitch bend and modulation parameters of
the sound. X band: For controlling the expression of sounds. Keyboard: Trigger notes on/off, also can be used as shortcuts to access edit more parameters. Headphone: For access to 6.35mm headphones.
1.2 Afturhlífin
AUX IN: Stereo audio input.External devices can be connected (TRS cable only) OUTPUT L/R: Use balanced cable for connecting active speaker. MIDI IN/THUR/OUT: Receive or send MIDI message, connect the external MIDI device. ASSIGN: Assignable pedal input, connect an expression pedal by default. PROG SWITCH: Assignable pedal input, connect a program change pedal by default. SUSTAIN: Assignable pedal input, connect a sustain pedal by default. USB: Connect to your computer, this port provides both power and MIDI data DC: Conect the power adapter.
X Max User Manual 2
Leiðsögumaður
2.1 Tilbúið til notkunar
Spilaðu sjálfstætt: Vinsamlegast notaðu meðfylgjandi straumbreyti til að tengja X Max, og stingdu um leið heyrnartólunum í heyrnartólatengið á X Max. Einnig er hægt að tengja virka hátalarann í gegnum OUTPUT L/R tengin að aftan, snúa X hnappinum til að velja rödd og byrja að spila.
Tenging við tölvu: Vinsamlegast notið meðfylgjandi USB snúru til að tengja X Max við tölvuna ykkar. X Max er plug-and-play tæki bæði á Windows og Mac OS og það mun sjálfkrafa setja upp nauðsynlega rekla án frekari uppsetningar. Eftir að þú hefur ræst DAW hugbúnaðinn skaltu velja X Max sem MIDI inntakstæki til að byrja.
X Max User Manual 3
Veldu senu: Sjálfgefin senan í X Max er Performance, sem er hönnuð til sjálfstæðrar notkunar fyrir æfingar og flutning. Þegar þú tengir X Max við tölvuna þína og notar DAW-tæki geturðu ýtt á SCENE-hnappinn og síðan snúið X-hnappinum til að velja senuna sem samsvarar DAW-hugbúnaðinum þínum til að fá betri upplifun.
Notkun með utanaðkomandi MIDI tæki: Notið meðfylgjandi straumbreyti til að tengja X Max og tengdu síðan MIDI OUT/MIDI IN tengi X Max við MIDI tengi utanaðkomandi MIDI tækis með 5 pinna MIDI snúru.
X Max User Manual 4
2.2 X Knob
The X knob has two working mode, the default mode is General Mode, long press about 0.5 seconds to switch to Setup Mode, which allows you to set the keyboard’s relevant parameter options, for more details please refer to 4. Setting Mode. Normal Mode: Turn the X knob to switch sound. Mode change when using some of the function buttons and key sub-functions. Setting Mode: Turn the X knob to select options, press to confirm, press about 0.5 seconds to exit the setting mode.
2.3 Transpose and Octave
Pressing the or button to shift the octave range of keyboard, when activated, the selected octave button will light up, press the and buttons simultaneously to quickly reset the octave shift. Press and hold the TRANS button, then pressing the or button to transpose, when activated, the TRANS button will light up, at this time press the TRANS button once to turn off the shift temporarily, press the TRANS button again to restore the shift memory of the last shift, and press the TRANS button to reset the shift setting, the TRANS button light will indicate that the shift has been activated with bright orange, the button light will indicate that there exists a shift memory with 70% bright orange, and the button light will indicate that the shift has not been activated or that the shift is zero with dark orange.
2.4 Pitch og mótun
Two joywheel allow for real-time pitch bend and modulation control. Sliding up or down on the Pitch joywheel will raise or lower the pitch of the selected tone. Pitch defaults to the middle position and will automatically return to the middle point when you release your hand. Sliding up on the Modulation touch joywheel increases the amount of modulation on the selected
X Max User Manual 5
sound. Mod defaults to the bottom position and will remain in the last position touched by your finger when you release your hand.
2.5 X band
Lyklaborðið í X Max seríunni er með rafrýmdri snertirönd fyrir rauntímastjórnun á tjáningu. Með því að renna til vinstri eða hægri á X-bandinu hækkar eða lækkar þú tjáninguna. Lengst til vinstri er 0, sjálfgefið er hámarkið. Með því að renna til vinstri eða hægri haldast færibreyturnar í þeirri stöðu sem þú snertir síðast þegar þú sleppir hendinni.
2.6 Transport Buttons
Hljómborðið í X Max seríunni er með 6 flutningshnappum með tveimur stillingum: Performance (sjálfgefið) og DAW-stilling. Með því að ýta á SCENE hnappinn er hægt að breyta stillingum mismunandi DAW-skráa. Sjá 3.1 SCENE hnapp fyrir nánari upplýsingar um notkun. Flutningshnapparnir í Performance-stillingu hafa óskilgreint MIDI CC-númer. Þú getur stillt þá innan DAW hugbúnaðarins eftir þínum persónulegu notkunarvenjum. Í DAW-stillingu stjórna þessir hnappar flutningi DAW-skráa. Sjá 6. DAW-stillingar fyrir nánari upplýsingar um notkunarskref.
Hnappur
DAW Mode Rewind
Fast Forward Cycle Record Play Stop
Performance modeMIDI CC CC116 CC115 CC114 CC117 CC118 CC119
Þú getur breytt MIDI CC (Continuous Controller) númeri hnappanna til að stjórna öðrum aðgerðum í gegnum stillingarhugbúnaðinn MIDIPLUS Control Center. Vinsamlegast vísaðu til 7. MIDIPLUS Control Center fyrir nánari upplýsingar um notkun.
X Max User Manual 6
2.7 Hnappar
X Max series keyboard has 8 assignable knobs with three mode: Performance(default), DAWs and ARP
mode.the control functions of each knob are as follows:
Hnappur
Virka
MIDI CC númer
K1 Portamento Time
CC05
K2 Portamento Control
CC84
K3 Timbre/Harmonic Intens
CC71
K4 Brightness
CC74
K5 Chorus Send Level
CC93
K6 Reverb Send Level
CC91
K7 Pan
CC10
K8 Channel Volume
CC07
Þú getur breytt MIDI CC (Continuous Controller) númeri takkanna til að stjórna öðrum aðgerðum í gegnum stillingarhugbúnaðinn MIDIPLUS Control Center. Vinsamlegast vísaðu til 7. MIDIPLUS Control Center fyrir nánari upplýsingar um notkun.
2.8 hnappar
Hljómborðið í X Max seríunni er með 8 úthlutanlegum hnöppum með þremur stillingum: Performance (sjálfgefið), DAW og Program Change stilling. Stjórnunaraðgerðir hvers hnapps eru sem hér segir:
Button B1 B2 B3 B4 B5 B6 B7 B8
Function Portamento On/Off Sostenuto On/Off Soft Pedal On/Off Legato FootControl General Purpose Controller 5 General Purpose Controller 6 General Purpose Controller 7 General Purpose Controller 8
MIDI CC Number CC65 CC66 CC67 CC68 CC80 CC81 CC82 CC83
Þú getur breytt MIDI CC (Continuous Controller) númeri hnappanna til að stjórna öðrum aðgerðum í gegnum stillingarhugbúnaðinn MIDIPLUS Control Center. Vinsamlegast vísaðu til 7. MIDIPLUS Control Center fyrir nánari upplýsingar um notkun.
X Max User Manual 7
2.9 faders (only X6 Max and X8 Max)
Hljómborðið í X Max seríunni er með 8 úthlutanlegum faders með tveimur stillingum: Performance (sjálfgefið) og DAW stillingu. Stjórnunaraðgerðir hvers faders eru sem hér segir:
fader K1 K2 K3 K4 K5 K6 K7 K8
Function Breath Controller Vibrato Rate Vibrato Depth Celestes Depth Tremolo Depth Phaser Depth Attack Time Release Time
MIDI CC Number CC02 CC76 CC77 CC94 CC92 CC95 CC73 CC72
Þú getur breytt MIDI CC (Continuous Controller) númeri fadersins til að stjórna öðrum aðgerðum í gegnum stillingarhugbúnaðinn MIDIPLUS Control Center. Vinsamlegast vísaðu til 7. MIDIPLUS Control Center fyrir nánari upplýsingar um notkun.
2.10 púðar
The X Max series features 8 velocity-sensitive pads with RGB lights, featuring 4 modes that are switched via the PAD button and CHORD button. Press the CHORD button to switch between Note mode and Chord Memory mode, and press the PAD button to switch between Note mode and CC mode. You can press the PAD button to activate the Chord Trigger mode after opening the CHORD button. NOTE mode(Default): Press any PAD to play drums, default control MIDI channel 10. Chord Memory mode: Store chords in the PAD, press any one PAD and play one key to play the chord. CC mode: Press any PAD send MIDI CC. Chord Trigger mode: Press any one PAD to play the chord, default control MIDI channel 1.
X Max User Manual 8
2.11 aðgerðarhnappar
X Max series keyboard has 9 function buttons, please refer to 3. Function Buttons for detailed operation steps. SCENE Button: Change DAW preset. ARP Button: Arpeggiator. PAD 9-16 Button: Page turning of PADs. CHORD Button: Switch the PADs to chord memory mode. SUSTAIN Button: Sustain on or off. SPLIT Button: Keyboard split. KNOB Button: Switch the knobs to arpeggiator control. BUTTON Button: Switch the buttons to quickly change the sound. PAD Button: Switch the PADs to chord trigger and CC mode.
2.12 Lyklaborð
X Max býður upp á 49/61/88 fullstóra, hálfvegna hraðanæma takka. Þessa takka er einnig hægt að nota sem flýtileiðir til að stilla stýringar, MIDI rásir í stillingarham, fyrir frekari upplýsingar, vinsamlegast vísið til 4. Stillingarhamur.
When in Setting Mode, the keys with labeled functions will be used as shortcuts to access the parameters, the labeled keys as follow: VEL.: Setting the keyboard velocity sensitive curve, select between Normal, Fixed, Soft, Hard or Custom. The default is Normal. CLOCK: Setting the ARP clock control, select between Internal, USB and MIDI IN.The default is Internal. MSB: Setting the controller number for “Most Significant Byte” (ie, MSB) of Bank Select. This message has a range between 0 and 127. The default is 0. LSB: Setting the controller number for “Least Significant Byte” (ie, LSB) of Bank Select. This message has a range between 0 and 127. The default is 0. SCALE: Selecting the build in Smart Scale, when a scale is selected, the scale notes will be mapped on the white keys, for details, please refer to 8.2 Scales, the default is Off. LEARN: Set the scale mode to EASY or LEARN. MIDI CHANNELS: Setting the MIDI Channel of keyboard, the range between 1 to 16, the default is 1.
Note: The keyboard aftertouch can be assigned to any CC controller. The default functions for each scene preset are as follows:
Scene Performance Ableton Live Steinberg Cubase FL Studio Logic Pro Performance1 Performance2
Aftertouch CC01
Channel Aftertouch Channel Aftertouch Channel Aftertouch Channel Aftertouch
CC01 CC01
Assignable No No No No No Yes Yes
X Max User Manual 9
3.1 SENNA Hnappur
Ýttu á Scene hnappinn, snúðu X hnappinum til að skipta um DAW. Ýttu aftur til að staðfesta núverandi val og hnapparnir, takkarnir, fader-hnapparnir og flutningshnapparnir verða samsvarandi DAW stjórntæki. Hljómborðið í X Max seríunni inniheldur einnig 2 Performance forstillingar og 3 USER forstillingar fyrir notendur til að búa til sínar eigin forstillingar.
3.2 ARP Button
Ýttu á ARP hnappinn til að virkja arpeggiatorinn og þá kviknar á takkanum. Þú getur ýtt á hvaða nótu sem er til að spila arpeggiatorinn og snúið takkunum til að breyta ARP breytum. Sjá nánari upplýsingar í 3.7 HNAKKUR hnappur fyrir frekari upplýsingar um notkun takkans.
3.3 PAD 9-16 Button
Ýttu á PAD 9-16 hnappinn til að blaða á PAD diskum, þú getur blaðað í nótnastillingu, hljómaminnisstillingu og hljómakveikjustillingu.
3.4 CHORD Button
Hnappurinn fyrir hljóma hefur tvær aðgerðir: Ýttu stutt á hnappinn til að virkja hljómaminnisstillingu, veldu hvaða PAD sem er til að spila PAD-hljóminn. Haltu inni hnappinum til að fara í hljómaupptökustillingu, veldu hvaða PAD sem er og PAD-ljósið blikkar. Spilaðu síðan hvaða nótu sem er á hljómborðinu og ýttu á PAD til að vista hljóminn. Haltu inni hljómahnappinum aftur til að hætta upptöku og hljómurinn er hægt að nota í hljómaminnisstillingu og hljómavirkjunarstillingu.
X Max User Manual 10
3.5 SUSTAIN Button
Sustain button button has 2 trigger modes: Short press the button will on, press again will off. Pressing and holding the button without releasing it switches the sustain function on, and releasing it switches it off.
3.6 SPLIT Button
Split button have 2 triggering mode: Short press button will on, the defalt split point is C4. Any operation after power on will only affect the left partition. Press again will off. If you press and hold the button without releasing it and press any note to change the split point, that note will be the new split point when the button is released.
3.7 KNOB Button
When the Knob button is pressed, the 8 controller knobs’ functions change to ARP parameter control functions. When the ARP button is turned on, the Knob button is also turned on. The functions of the knobs when the Knob button is switched on are as follows. K1/Swing: Control the swing of even notes. You can select OFF or the range from 51~75, the default is OFF. K2/Rate: Set the duration of each arpeggiator step. You can select 1/4, 1/4 Triplet, 1/8, 1/8 Triplet, 1/16, 1/16 Triplet, 1/32 or 1/32 Triplet, the default is 1/8. K3/Tempo: Control the tempo of arpeggiator, and the tempo range is from 30~300 BPM. The default is 120 BPM. K4/Order: Change the playing order of arpeggiator. You can select Up, Down, EXCL, INCL, Played, Random or Mutate. The default is Up.
Up: Plays the current notes from lowest to highest. Down: Plays the current notes from highest to lowest. EXCL: Plays the current notes from lowest to highest and back again, the lowest note and the highest note play once. INCL: Plays the current notes from lowest to highest and back again, the lowest note and the highest note play twice. Played: Plays the current notes in the order they were originally played. Random: Plays the current notes in a random, non-repeating order.
X Max User Manual 11
Mutate: Plays the current notes in mutate. K5/Octave: Control the octave of arpeggiator, and the octave range is from 1~4. The default is 1. K6/Gate: Control the length of the individual notes, and the range is from 5%~95%. The default is 50%. K7/Mutate: Control the parameters of mutate,and the range is from 0~100. The default is 0. K8/Latch: Control the state of arpeggiator when your hands leave the keyboard. You can select OFF and ON, the default is OFF.
3.8 BUTTON Button
8 buttons defalt CC mode, when the Button button is pressed, the 8 button functions change to quick sound select. Press the Button button again back to the CC mode function of buttons.The functions of the buttons when the Button button is switched on are as follows.
Number B1 B2 B3 B4 B5 B6 B7 B8
Sound Grand Piano Dyno E.Piano FM E.Piano DX Class.Strs&Pad Class.Polysyn
M12 Brass Bangdi Guzheng
3.9 PAD Button
PAD button has 2 function mode: The 1st mode: Press the PAD button to switch between Note mode and CC mode. The first press switches the PAD to CC mode and the PAD button with bright orange, press any PAD to send MIDI CC. The second press switches the PAD to Note mode and the PAD button with dark orange, press any PAD to play drums. The 2nd mode: When the CHORD button is open with bright orange, the Chord Memory mode of the PAD is activated. Then press the PAD button, the CHORD button will turn dark orange and the PAD button will turn green, PAD will go into Chord Trigger mode. In Chord Trigger mode, press the PAD to play chords directly. Press the PAD button again to change to Chord Memory mode, the PAD button will turn dark orange and the CHORD button will turn bright orange, press any one PAD to play one key chord.
X Max User Manual 12
Stillingarstilling
In the Setting Mode, you can set your keyboard easily. Long press the X knob about 0.5 second, the knob light will breathing when enter the Setting Mode.
4.1 Changing The Keyboard Velocity Curve
Press and hold the X knob for about 0.5 seconds, when the knob light is breathing, follow these steps: 1. Press the key labeled “VEL.”, the screen will display the currently selected velocity curve, 2. Turn the X knob to select Normal, Fixed, Soft, Hard or Custom, 3. Press the X knob to confirm, the screen will display you just selected velocity curve.
4.2 Changing The MIDI Clock Mode
Press and hold the X knob for about 0.5 seconds, when the knob light is breathing, follow these steps: 1. Press the key labeled “CLOCK”, the screen will display the currently selected MIDI clock mode, 2. Turn the X knob to select Internal, USB or MIDI IN, 3. Press the X knob to confirm, the screen will display you just selected MIDI clock mode.
4.3 Changing The Bank MSB
Press and hold the X knob for about 0.5 seconds, when the knob light is breathing, follow these steps: 1. Press the key labeled “MSB”, the screen will display the currently value, 2. Turn the X knob to set the controller number between 0 and 127, 3. Press the X knob to confirm, the screen will display you just selected controller number.
4.4 Changing The Bank LSB
Press and hold the X knob for about 0.5 seconds, when the knob light is breathing, follow these steps: 1. Press the key labeled “LSB”, the screen will display the currently value,
X Max User Manual 13
2. Turn the X knob to set the controller number between 0 and 127, 3. Press the X knob to confirm, the screen will display you just selected controller number.
4.5 Selecting a Smart Scale
Press and hold the X knob for about 0.5 seconds, when the knob light is breathing, follow these steps: 1. Press the key labeled “SCALE”, the screen will display the currently scale, 2. Turn the X knob to select a scale, 3. Press the X knob to confirm, the screen will display you just selected scale name.
4.6 Changing The Scale Mode
Press and hold the X knob for about 0.5 seconds, when the knob light is breathing, follow these steps: 1. Press the key labeled “LEARN”, the screen will display the currently scale mode, 2. Turn the X knob to select EASY or LEARN, 3. Press the X knob to confirm, the screen will display you just selected scale mode.
4.7 Changing The MIDI Channel
1. Press and hold the X knob for about 0.5 seconds, When the knob light is breathing. 2. Press the corresponding note on the keyboard below the MIDI channels you wish to select. 10 for instance, the screen will displays “10”, The keyboard will exit the Setting Mode, and the MIDI Channel is changed to channel 10 successfully.
5. Factory Reset
Á einhverjum tímapunkti gætirðu viljað endurstilla tækið þitt í verksmiðjustillingar. Til að framkvæma verksmiðjustillingar á X Max skaltu fylgja þessum skrefum:
1. Disconnect the USB cable or power adapter, 2. Press and hold the “B1” and “B2” buttons, 3. Plug in the USB cable or power adapter, 4. Release the “B1” and “B2” buttons when the screen displays “RESET”. Note: Performing a factory reset will clear all your changes to the keyboard. Please operates carefully.
*Press and hold the 2 Octave buttons and plug in the USB cable or power adapter, X Max will enter update mode. Then plug in the USB cable or power adapter and X Max will switch on normally.
X Max User Manual 14
DAW stillingar
Hljómborð í X Max seríunni eru með tvær stillingar: Performance mode (sjálfgefið) og DAW mode. Í DAW mode er hægt að stjórna vinsælum DAW tækjum með X hnappi, flutningshnöppum, 8 hnöppum, 8 hnöppum og 8 faders. Þú þarft að breyta X Max í samsvarandi DAW mode, vinsamlegast vísaðu til 3.1 SCENE hnappur. Niðurhal handrits: XMax Script
6.1 Ableton Live
1. Download Ableton Live script folder. 2. Copy the script folder to Windows: C:Users(your username)AppDataRoamingAbletonLive (version number)PreferencesUser Remote Scripts MAC: Macintosh HDUsers(your username)librarypreferencesAbletonLive ()User Remote Scripts
3. Open Options >> Preferences in the menu bar, select the Link/Tempo/MIDI tab, select your keyboard model in the Control screen, select your MIDI keyboard in Input/Output, and set the settings in MIDI Ports as shown below:
X Max User Manual 15
6.2 Steinberg Cubase/Nuendo
1. Download Cubase script file. 2. Copy the script folder to C:Users(your username)DocumentsSteinbergCubaseMIDI RemoteDriver ScriptsLocal
3. Open the software and use it(You need to use Cubase 11 or higher)
X Max User Manual 16
6.3 FL Studio
1. Download FL Studio script folder. 2. Copy the script folder to C:UsersAdministratorDocumentsImage-LineFL StudioSettingsHardware
3. In the menu, click Options >> MIDI Settings.
X Max User Manual 17
3. Select MIDI in the window, and choose your keybard.
5. In the Controller Type drop down list, select MIDIPLUS X Max, and then enable it by clicking “Activate.”
X Max User Manual 18
6.4 Logic Pro X
1. Download Logic Pro X script folder. 2. Open Install_X_Max_Scripts.dmg .
3. Click on Double-click-to-Install to install.
X Max User Manual 19
7. MIDIPLUS Control Center
X Max User Manual 20
1. Scene: You can set the X Max to different scenes, the default Performance and DAW scenes cannot be changed. You can select the Performance or User scene to create your own preset, and these presets can be saved in the X Max.
Tansport: You can configure the CC number, MIDI Channel and button type of the tansport buttons. Knobs: You can configure the CC number and MIDI Channel of 8 knobs. Buttons: You can select the difference mode to configure. In CC mode(Button mode off), you can configure the CC number, MIDI Channel and button type. In sound mode(Button mode on), you can configure the sound of 8 buttons. Faders: You can configure the CC number and MIDI Channel of 8 faders. Aftertouch: You can configure the CC number keyboard aftertouch. PADs: You can select the difference mode to configure. In Note mode(PAD mode off), you can configure the note(drum) and MIDI Channel. In CC mode(PAD mode on), you can configure the CC number, MIDI Channel and Pad type. 2. Modulation Joywheels: You can configure the CC number and MIDI Channel of the modulation joywheel. 3. X Band: You can configure the CC number and MIDI Channel of the X Band. 4. Keyboard: You can configure the Vel. Curve, MIDI Channel, Scale, Scale Mode and aftertouch switch of keyboard. 5. Stand by: You can configure the stand by time of X max. 6. Split: You can configure the MIDI Channel, split point and controller allocate of the left or right part. 7. Pedals: You can configure the mode of 3 pedals. In CC mode, you can configure the CC number and MIDI Channel. In sound mode, you can configure the MIDI Channel. 8. Arpeggiator: You can configure the Swing, Rate, Tempo, Order, Octave, Gate, Mutate, Latch and Clock Source of arpeggiator.
Note: please visit Download Address to download the MIDIPLUS CONTORL CENTER.
8. Viðauki
8.1 Tæknilýsing
Product Name Keyboard Maximum Polyphony Screen Button
Knob PAD Joy Wheel
X Max 49/61/88 Full-sized, Semi-weighted velocity-sensitive and aftertouch Keys 64 TFT 2 Octave buttons, 1 Transpose button, 6 Transport buttons, 8 Parameter knobs and 9 function knobs 1 Clickable encoder and 8 knobs 8 velocity-sensitive pads with backlit 1 Pitch, 1 Modulation
X Max User Manual 21
Touch joywheel Connectors
Mál Nettóþyngd
1 Touch joywheel USB port, MIDI IN, MIDI THRU, MIDI OUT, Sustain pedal input, Prog Switch pedal Input, Assign pedal input, 2 Balance output, 1 AUX IN jack and 1 Headphone jack X4Max792.3*209.8*86.4 mm X6Max957.5*209.8*86.4 mm X8Max1335*209.8*86.4 mm X4Max5.00 kg X6Max6.07 kg X8Max8.26 kg
8.2 Vægir
SCALE OFF
China 1 China 2 Japan 1 Japan 2 Blues 1 Blues 2 BeBop Whole Tone Middle East Dorian Lydian Harmonic Minor
Minor Phrygian Hungarian Minor
Egypt Vaporwave Dangerous Ryukyu Island
Kúreki
ATH -
C, D, E, G, A C, E, F, G,B C,D, F, G, B C, D, E, G, A C, E, F, F, G, B C, D, E, E, G, A C, D, E, F, G, A, B, B C, D, E, F, G, B C, D, E, F, G, A, B C, D, E, F, G, A, B C, D, E, F, G, A, B C, D, E, F, G, A, B C, D, E, F, G, A, B C, D, E, F, G, A, B C, D, E, F, G, A, B C, D, E, E, G, A, B C, D, E, G, B
C, D, F, A C, D, E, G, B C, D, E, F, G, B
X Max User Manual 22
8.3 MIDI CC Listi
CC nr.
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 ~ 15 16 17 18 19 20 ~ 31 32 33 34 35 36 37 38 39 40 41 42 43 44
45 46 ~ 47
48 49 50 51 52 ~ 63 64
Stjórnunaraðgerð
Bank Select MSB Modulation Breath Controller Undefined Foot Controller Portamento Time Data Entry MSB Channel Volume Balance Undefined Pan Expression Controller Effect Controller 1 Effect Controller 2 Undefined General Purpose Controller 1 General Purpose Controller 2 General Purpose Controller 3 General Purpose Controller 4 Undefined Bank Select LSB Modulation LSB Breath Controller LSB Undefined Foot Controller LSB Portamento LSB Data Entry LSB Channel Volume LSB Balance LSB Undefined Pan LSB Expression Controller LSB Effect Controller 1 LSB
Effect Controller 2 LSB Undefined General Purpose Controller 1 LSB General Purpose Controller 2 LSB General Purpose Controller 3 LSB General Purpose Controller 4 LSB Undefined Sustain
CC nr.
65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 ~ 90 91 92 93 94 95 96 97 98 99 100 101 102 ~ 119
120 121 122 123 124 125 126 127
Stjórnunaraðgerð
Portamento On/Off Sostenuto On/Off Soft Pedal On/Off Legato FootControl Hold 2 Sound Variation Timbre/Harmonic Intens. Release Time Attack Time Brightness Decay Time Vibrato Rate Vibrato Depth Vibrato Delay Sound Controller 10 General Purpose Controller 5 General Purpose Controller 6 General Purpose Controller 7 General Purpose Controller 8 Portamento Control Undefined Reverb Send Level Tremolo Depth Chorus Send Level Celestes Depth Phaser Depth Data Increment Data Decrement NRPN LSB NRPN MSB RPN LSB RPN MSB Undefined
All Sound Off Reset All Controllers Local Control On/Off All Notes Off Omni Mode Off Omni Mode On Mono Mode On Poly Mode On
X Max User Manual 23
8.4 Voice List
Númer
Nafn
Píanó
1
Flygill
2
Grand píanó 2
3
Grand píanó 3
4
Grand píanó 4
E.Píanó
5
Dyno rafpíanó
6
Dyno rafpíanó 2
7
Rafmagns Grand 80
8
A200 rafpíanó
9
A200 E.Píanó 2
10
FM rafpíanó DX
11
FM E.Píanó SA
12
FM EP mjúk
13
FM EP Harðspjald
14
E.Píanó
15
E. Píanó 2
16
E. Píanó 3
17
E. Píanó 4
18
E. Píanó 5
19
60's E. píanó
20
Afstemmd EP
21
Afstemmd EP 2
22
Afstemmd EP 3
23
Sembal
24
Sembal. 2
25
Clavinet
Slagverk
26
Celesta
27
Glockenspiel
28
Tónlistarbox
29
Tónlistarbox 2
30
Víbrafónn
31
Vibrafón 2
32
Marimba
33
Marimba 2
34
Xýlófón
35
Pípulaga bjalla
36
Tinkle Bell
Númer
Nafn
Orgel
37
Hammond orgel
38
Hammond-orgel 2
39
Slagverkur
40
Rokkorgel
41
Orgel kirkjunnar
42
Orgel kirkjunnar 2
43
Orgel 109
44
60's Organ
45
Jafnvel Bar
46
Orgelbassi
47
Orgel
48
Óstillt orgel
49
Rotary orgel
50
Rotary orgel 2
51
Reed orgel
Harmonika og munnhörpa
52
Franska harmonikka
53
Harmonika
54
Bandoneon
Gítar
55
Nylon gítar
56
Nylon gítar 2
57
Ukulele
58
Stálgítar
59
Stálgítar 2
60
12 strengja gítar
61
12 strengja gítar 2
62
saltaranna
63
Santur 2
64
Mandólín
65
Jazzgítar
66
Hawaiian gítar
67
Hreinn gítar
68
Hreinn gítar 2
69
Kórgítar
70
Kórgítar 2
71
Dempaður rafgítar
72
Funk gítar
73
Overdrive gítar
Númer
Nafn
74
Ofgír gítar 2
75
Brenglunargítar
76
Hljóðfæri gítar
77
Gítarupplýsingar
Bassi
78
E-bassi
79
E-bassi 2
80
Kassabassi
81
Fingraður bassi
82
Fingraður bassi 2
83
Valinn bassi
84
Valinn bassi 2
85
Valinn bassi 3
86
Fretlaus bassi
87
Skella bassa
88
Slagbassi 2
89
Slagbassi 3
90
Andrúmsloft
91
TB303 bassi
92
Tekno bassi
93
Tekno Bass 2
94
Seq 303 Overdrive
95
Seq 303
96
Reso SH bassi
97
Modular bassi 2
98
Seq bassi
99
Analog bassi
100
Gúmmí bassi
101
SH101 Bass
102
SH101 Bassi 2
103
Synth bassi
104
Synth bass 2
105
Synth bass 3
106
Synth bass 4
107
Synth bass 5
108
Synth bass 6
109
Synth bass 7
110
Sléttur bassi
Strengir og kór
111
Fiðla
X Max User Manual 24
112
Víóla
113
Selló
114
Kontrabassi
115
Tremolo strengir
116
Pizzico strengir
117
Harpa
118
Klassísk strengjapúði
119
Strengjasveit
120
Klassískur pólýsynth
121
Hljómsveit
122
Slow strengjasveit
123
OB strengur
124
Synth strengir
125
Synth strengir 2
126
Synth strengir 3
127
Kór Aahs
128
Rotary strengur
129
Rödd Oohs
130
Synth rödd
Brass
131
Trompet
132
Trompet 2
133
Flugel Horn
134
Björt trompet
135
Þaggaður trompet
136
Þögguð trompet 2
137
Trombone
138
Tuba
139
Fransk horn
140
Brass deild
141
Brass kafli 2
142
M12 messing
143
Synth Brass
144
Synth Brass 2
145
Synth Brass 3
146
Synth Brass 4
Tréblásturstæki og aðrir
147
Saxó sópransöngkona
148
Sópransax 2
149
Altosax
150
Alt Sax 2
151
Tenór Sax
152
Andandi tenór
153
Saxi barítóns
154
Baritónsax 2
155
Enskt horn
156
Enska hornið 2
157
Fagott
158
Klarinett
159
Bass klarinett
160
Óbó
161
Piccolo
162
Flauta
163
Upptökutæki
164
Pan flauta
165
Flöskublástur
166
Flauta
167
Ocarina
Synthesizer og púði
168
Leiðandi OB
169
Sá blý
170
Ferningur blý
171
Chiffer leiða
172
Square Wave
173
Sinusbylgja
174
Sá Wave
175
Solo Syn.Vox
176
5th Saw Wave
177
Bassi & blý
178
Mjúkt púði
179
OBX mjúkur púði
180
Krókur
181
K500 bjalla
182
Fantasia Pad
183
Syn.Calliope
184
Bow.Glass púði
185
Hljóðrás
186
Heitt púði
187
Polysyn.Pad
188
Geimröddspjald
189
Halo Pad
190
Sópapúði
191
Birtustig
192
Goblin
193
Bergmálsdropar
194
Echo Pan
195
Stjörnuþema
Heimur
196
Sítar
197
Banjó
198
Shamisen
199
Koto
200
Taisho Koto
201
Kalimba
202
Sekkapípa
203
Qudi
204
Bangdi
205
Bawu
206
Hulusi
207
DongXiao
208
Erhu
209
Matouqin
210
Guzheng
211
Suona
212
Xun
Trommusett
1
Standard búnaður
2
Herbergissett
3
Power Kit
4
Rafbúnaður
5
TR808 Kit
6
Jazzsett
7
Bursta Kit
8
Hljómsveitarsett
X Max User Manual 25
www.midiplus.com
X Max User Manual 26
Skjöl / auðlindir
 |
MIDIPLUS X MAX Series MIDI keyboard [pdfNotendahandbók X4 Max, X6 Max, X8, X MAX Series MIDI keyboard, X MAX Series, MIDI keyboard |