RB-LCD-7V2-CASE
ALMENNAR UPPLÝSINGAR
Thank you for choosing our product. Below, we will show you what you need to know about commissioning and using it. If you encounter any unexpected problems during use, please do not hesitate to contact us.
SAMSETNING
- Take the front panel of the housing and insert the display into the cutout. Secure the supplied spacers in the marked mounting holes.
- Now insert the display cable suitable for your Raspberry Pi into the display board. Also connect the two pin power cable to the board. Then place your Raspberry Pi on the spacers and screw it in place with the screws provided. Then insert the other end of your display cable into the display port of your Raspberry Pi. You can now also connect the other end of the two-pin power cable to the GPIO header of your Raspberry Pi.
- Now connect the two power cables of the case fan to the marked pins on your Raspberry Pi.
- Now insert the display into the base of the housing and secure it with the screws provided.
AÐRAR UPPLÝSINGAR
Upplýsinga- og endurtökuskyldur okkar samkvæmt þýskum lögum um raf- og rafeindabúnað (ElektroG)
TÁKN UM RAF- OG RAFBÚNAÐI:
This crossed-out wheelie bin symbol means that electrical and electronic equipment must not be disposed of with household waste. You must take old appliances to a collection point. Before handing them in, you must remove any old batteries and accumulators that are not enclosed in the old appliance.
ENDURSKILAVALGJÖG:
Sem notandi, þegar þú kaupirasing a new device, you can return your old device (which essentially performs the same function as the new one purchased from us) for disposal free of charge. Small appliances with external dimensions not exceeding 25 cm can be returned in normal household quantities, regardless of whether a new appliance is purchased.
OPTION TO RETURN ITEMS TO OUR COMPANY LOCATION DURING BUSINESS HOURS:
Simac GmbH, Pascal Street 8, D-47506 Neukirchen-Vluyn
RETURN OPTION NEAR YOU:
We will send you a parcel label that you can use to return the device to us free of charge. To do so, please contact us by email at Service@joy-it.net eða í síma.
INFORMATION ABOUT PACKAGING:
Vinsamlegast pakkaðu gamla tækinu þínu á öruggan hátt fyrir flutning. Ef þú átt ekki viðeigandi umbúðir eða vilt ekki nota þitt eigið, vinsamlegast hafðu samband við okkur og við sendum þér viðeigandi umbúðir.
STUÐNINGUR
We are also there for you after your purchase. If you have any questions or problems, we are also available to
assist you via email, phone, and our ticket support system.
Netfang: þjónusta@joy-it.net
Sími: +49 (0)2845 9360 – 50
Fyrir frekari upplýsingar, vinsamlegast heimsækja okkar websíða:
www.joy-it.net
Skjöl / auðlindir
 |
JOY-it RB-LCD-7V2-CASE Original Raspberry Pi Touch Display [pdfNotendahandbók RB-LCD-7V2-CASE Original Raspberry Pi Touch Display, RB-LCD-7V2-CASE, Original Raspberry Pi Touch Display, Raspberry Pi Touch Display, Pi Touch Display |